I think besides being slightly lighter, another reason bamboo darts tend to shoot faster is because the inset body reduces the amount of barrel friction in springers. I could be wrong though!
I mean, half darts didn’t come from worker, but they definitely commercialized them very well 😂 I recall xplorer also doing really good short darts back then, but I also remember making my own hot glue domes back in middle school for a modded nitefinder I’d built based on videos from Drac and Bobo. That said, all of these modern options are way better than the half darts I used to make!
@@SupermanPrime-vb2un The X Shot darts are by far the worst half length darts I've ever tested. They are noticeably less accurate, to the point that I can actually see them visibly fishtailing when they leave the barrels of my blasters. Get darts from Dart Zone or Worker instead.
I don’t think I’m alone in being offended that you would call those darts “short”. I and many others would consider that to be very average and do not appreciate being represented in such a negative way. Please refrain from using the word “short” in all future videos or you will be hearing from all of our lawyers. Good day.
@@anunprofessionalfrog1180Apparently you shouldn't be short tempered when you get short changed either. Anyway, I and many others don't like being referred to as "average", we're all above average, so please refrain from using that word, otherwise you will be hearing from my lawyers very... erm... shortly! 😂
@@rcautoball I haven’t noticed any major difference in accuracy, not to say there isn’t some for better or worse, but they seem to get stuck much less in the sealed breach blasters I own then other darts. Plus they have the great quality glue and foam of the worker gen3+ darts that everyone loves.
Can you do a 3d printed replica of a snider enfield Mark three that actually shoot darts and the shells are powered by co2 gas like that double barrel shotgun pistol and if you do do that can you have a link to the file so I can print it and please make the barrel the same caliber as the blue dart as if it were a real gun and please put a orange ripe at the end of the barrel please I’m beggin you I’m a firearms guy and I would love a nerf model of the snider enfield and please have it in the regular blue dart caliber but as if it were a real gun like the co2 is expanded the hollow point of the bullet causing the bullet to spin like on a Springfield musket in 1861 rifled musket and please respond and get back to me please
Does anyone have a solution or know if I can convert a Nerf N-Strike long strike cs-6 blaster from normally shooting a regular size dart to a half size dart???? Please help!
I think besides being slightly lighter, another reason bamboo darts tend to shoot faster is because the inset body reduces the amount of barrel friction in springers. I could be wrong though!
No you're correct, that's exactly the idea.
The same reason why they're not recommended for fly wheelers
then we have the 9 millimet-
Fr tho lol
That really is how people felt about half lengths when they were first put on store shelves next to the Nexus Pros LMAO
I'm more of a mega guy
.50 bmg
@ferrariformulaonefan16 wait really
That's pretty sick
Simple and concise. Love it
I got a bunch of Dart Zone Max (the red ones, from Target) darts and they work great in all of all of my blasters and have good quality control.
I mean, half darts didn’t come from worker, but they definitely commercialized them very well 😂 I recall xplorer also doing really good short darts back then, but I also remember making my own hot glue domes back in middle school for a modded nitefinder I’d built based on videos from Drac and Bobo. That said, all of these modern options are way better than the half darts I used to make!
Is your favorite color combo perhaps gray and red?
I stay with rubies, gen 3s, and embers. Occasionally bamboo 1.0s and 2.0s.
Worker Gen3+ one love
Haven’t tried worker gen 3’s yet, but I hope to eventually
You gotta add the new official nerf pro darts to the review!
Bamboo darts look like security pins in locks
The round tipped ones seemed to be quite accurate in the Jurassic PRO for some reason.
I think the concern is they hurt more because of the lower surface area
@@wistralis7387 possibly - like the mass of Zing arrows at 130 FPS isn't buffered much by broader flat tips of foam front.
Can you do a 3d printed co2 nerf shell in blue dart caliber shell and the shell is powered by co2 gas
The x shot darts are only good for about 10 cycles. Dart Zone darts are good for 100+ easy.
Are they really that bad? Was considering buying some.
@@SupermanPrime-vb2un The X Shot darts are by far the worst half length darts I've ever tested. They are noticeably less accurate, to the point that I can actually see them visibly fishtailing when they leave the barrels of my blasters. Get darts from Dart Zone or Worker instead.
I wish I could get into short darts but all my blasters use long darts
what about pakd
I don’t think I’m alone in being offended that you would call those darts “short”. I and many others would consider that to be very average and do not appreciate being represented in such a negative way. Please refrain from using the word “short” in all future videos or you will be hearing from all of our lawyers. Good day.
I hope this is irony
@@Bigorna_head77 those darts are average
@@anunprofessionalfrog1180Apparently you shouldn't be short tempered when you get short changed either. Anyway, I and many others don't like being referred to as "average", we're all above average, so please refrain from using that word, otherwise you will be hearing from my lawyers very... erm... shortly! 😂
What about worker gen3 bamboos? They are by far my favorite type but I rarely see them compared.
Do you feel they are as accurate, or is it not noticeable to you?
@@rcautoball I haven’t noticed any major difference in accuracy, not to say there isn’t some for better or worse, but they seem to get stuck much less in the sealed breach blasters I own then other darts. Plus they have the great quality glue and foam of the worker gen3+ darts that everyone loves.
@@AndrewHayes616 That's good to know. I may swoop some up to try out for comparison to the regular Worker Gen 3s.
Can you do a 3d printed replica of a snider enfield Mark three that actually shoot darts and the shells are powered by co2 gas like that double barrel shotgun pistol and if you do do that can you have a link to the file so I can print it and please make the barrel the same caliber as the blue dart as if it were a real gun and please put a orange ripe at the end of the barrel please I’m beggin you I’m a firearms guy and I would love a nerf model of the snider enfield and please have it in the regular blue dart caliber but as if it were a real gun like the co2 is expanded the hollow point of the bullet causing the bullet to spin like on a Springfield musket in 1861 rifled musket and please respond and get back to me please
Does anyone have a solution or know if I can convert a Nerf N-Strike long strike cs-6 blaster from normally shooting a regular size dart to a half size dart???? Please help!
I heard Coop 772 Is gone for good I hope this is a prank on his part 😢😢😢😢
Are the xshot short darts sold separately? Only ones I have seen come with the Longshot
Day 3 of asking for the ultra pharaoh to be modded
Hasn't he already modded one, or no?
@@rcautoballI don’t think so
Hello
wdym short, that's average
What do you mean "average", it's obviously just the angle you're looking at it... and it's a bit cold in here too. Definitely well above average. 😂