You perform the most sophisticated, detailed, comprehensive automotive diagnostic work on the planet, and you do it at the curb, in the gravel lot, in the weather, and late at night. And you make it look easy. Truly impressive. Thank you for sharing.
DS 625 is based on the same software as the ADS 325 and adds: - Industry-leading full color OE system wiring diagrams for vehicles 1986 and newer - Wireless VCI with freedom to move anywhere in the bay and stay connected to the vehicle - J2534 pass-thru VCI for OE programming capabilities - Large 10” ultra-crisp high-resolution display for optimum viewing in all lighting conditions - Dual 5MP front and rear cameras enables photos for sharing and Vehicle Scan Reports - HDMI output for extended display - Docking and charging station
hi dear how are you today i have 2007 rang rover the tccm module it's been damaged by water how can i program with Easy Way? if I swap the processor from old tccm to new one do you think is going to work? many thanks for help
Wow, bet that shop was super happy to hear the news on this one! Glad it worked!👍👍 This is the sort of thing that absolutely INFURIATES me about modern vehicles. Can't just grab another part from another vehicle, like we've been doing for 100 years - now, the electronics are going to PREVENT you from doing this! NOT COOL. 🤬🤬 I really hope auto manufacturers stop this sort of thing ... but I'm not sure they will, until people refuse to buy new cars, and tell the manufacturers WHY they're refusing to buy them. I guess it will be up to us to make these things continue running, come hell or high water.
what kind or auto logiic model is that , im having the same issue i out a used tranny and the truck wont start and etc.... its a 2007 range rover l322 i need to program the tcm can u help me out please thanks
Hi there i have a 2005 range rover hse with transfer case light on and trans is in limp mode and dealer told me i need new trans ,so will get a way with used one and programming. Thnx
It seems like I might have to get an autologic, just have to get me a little more euro work to make it pay for itself. Have you eeprom the module when the autologic doesn't programmed it?
WOW I CAN BREATHE AGAIN THANKS FOR THAT , YHO KEITH HOW ABOUT RUNNING IT BY AUTOLOGIC TO DO SOMETHING FOR NISSAN IN THE WAY OF A SCANTOOL AND THANKS . I DONT KNOW WHAT WILL YOU THANK OF NEXT BUT CAN'T WAIT TO SEE IT .
I watched a video last night, where a C5 Corvette was launching from the start line, and POP!! When he got back to the shop, and pulled it all out, the trans broke, the output shaft broke in more pieces than you could count, and the diff housing broke!! The first thing I thought of, CAN KEITH FIX THAT!! You really can't reprogram broken case housings, CAN YOU KEITH?? Lol I can send you some business!!
You perform the most sophisticated, detailed, comprehensive automotive diagnostic work on the planet, and you do it at the curb, in the gravel lot, in the weather, and late at night. And you make it look easy. Truly impressive. Thank you for sharing.
Thanks man. Just a career path I chose with no regrets. Glad you enjoy it too
Whats the autologic device??? @@NewLevelAuto
Thank you Keith. A win for the tool, for you, and the customer. Great day all around!
Success! Happy campers all around! Thanks for the video.
Can I use Autel ms906bt work it re program the gearbox replacement
Winner winner chicken dinner! I’d reset the adaptions too. Love my Autologic 👍🏻
Now you know that's done already sir 😊
awesome job. Thanks for sharing. All the best buddy.
Autologic for the win today ?? hehe !! good job
You have all the cool tools and can use them that is the key thanks
If I buy cardaq, will I able to do the same? What about your new bosch 325, will it able to scope and wiring diagram??????
No , no and no . To answer all 3 of those questions
DS 625 is based on the same software as the ADS 325 and adds:
- Industry-leading full color OE system wiring diagrams for vehicles 1986 and
newer
- Wireless VCI with freedom to move anywhere in the bay and stay
connected to the vehicle
- J2534 pass-thru VCI for OE programming capabilities
- Large 10” ultra-crisp high-resolution display for optimum viewing in all
lighting conditions
- Dual 5MP front and rear cameras enables photos for sharing and Vehicle
Scan Reports
- HDMI output for extended display
- Docking and charging station
where you guys located?
hi dear
how are you today
i have 2007 rang rover the tccm module
it's been damaged by water
how can i program with Easy Way?
if I swap the processor from old tccm to new one do you think is going to work?
many thanks for help
Did you find a fix
@@fatguyfriday
Yes I did, replace tccm and program to the car
What module did u buy?
Wow, bet that shop was super happy to hear the news on this one! Glad it worked!👍👍
This is the sort of thing that absolutely INFURIATES me about modern vehicles. Can't just grab another part from another vehicle, like we've been doing for 100 years - now, the electronics are going to PREVENT you from doing this! NOT COOL. 🤬🤬 I really hope auto manufacturers stop this sort of thing ... but I'm not sure they will, until people refuse to buy new cars, and tell the manufacturers WHY they're refusing to buy them. I guess it will be up to us to make these things continue running, come hell or high water.
Where is you shop located I am in New York and I need a transfer case module reprogram
Did you get your RR fixed
If yes please tell me where in NY
what kind or auto logiic model is that , im having the same issue i out a used tranny and the truck wont start and etc.... its a 2007 range rover l322 i need to program the tcm can u help me out please thanks
This one shown is the Assist Plus. But all the OpusIVS/Autologic scantools have the option now
That's a bug bare of mine, when scan tool manufacturers put shiny screen on their tools.
Wow. Great video. You saved the day....
Thank you Keith. Good job.
And thank you as always for your support
Hi there i have a 2005 range rover hse with transfer case light on and trans is in limp mode and dealer told me i need new trans ,so will get a way with used one and programming. Thnx
How did that turn out for u
So auto logic tools do it?
Yes they do
@@NewLevelAuto ok
Where are you located??
North Carolina
Sweet that is pretty awesome.
It seems like I might have to get an autologic, just have to get me a little more euro work to make it pay for itself. Have you eeprom the module when the autologic doesn't programmed it?
I have , but it's not really profitable for me
Very common problem over here with those piles of 'you know what' same thing, rip the console apart so you're able to at least move it(push) 👍
WOW I CAN BREATHE AGAIN THANKS FOR THAT , YHO KEITH HOW ABOUT RUNNING IT BY AUTOLOGIC TO DO SOMETHING FOR NISSAN IN THE WAY OF A SCANTOOL AND THANKS . I DONT KNOW WHAT WILL YOU THANK OF NEXT BUT CAN'T WAIT TO SEE IT .
Hope for the Rangy, yea. Thanks.
I watched a video last night, where a C5 Corvette was launching from the start line, and POP!! When he got back to the shop, and pulled it all out, the trans broke, the output shaft broke in more pieces than you could count, and the diff housing broke!!
The first thing I thought of, CAN KEITH FIX THAT!!
You really can't reprogram broken case housings, CAN YOU KEITH?? Lol I can send you some business!!
First again! What do I win? 😁
A day trip in the passenger seat
New Level Auto Best prize I could’ve won! Let me know when the seat will be empty. 👍