Evol ATV - installing lights on a 2017 Yamaha Raptor 90
HTML-код
- Опубликовано: 28 авг 2024
- A little overview of how I installed lights on her Yamaha Raptor 90
Handlerbar switch: www.amazon.com...
Eagle Eye LED headlamp: www.amazon.com...
Tail light: www.amazon.com...
Looks awesome brother thanks for the video! I just bought me a 2018 90 raptor that never got ridden for $800 and going to do the same thing you did and give it to my son for Christmas. Thank you once again very helpful! ✌🏼
That was a steal nice find👍
Awesome video thanks for posting! I ordered the same thing from the links you provided and installed the lights on my daughters 2020 raptor 90. It was easy to install.
Thanks for sharing dude. I am planning on doing the same on my 2017 son's Raptor 90
Thx man this helps alot
Nice!
Awesome video man thank you!
Awesome vid - do you think OEM raptor 660 or yfz headlights would fit on the 90cc??
I like the setup you came up with it looks pretty good, I was just wondering if you had any issues with the charging system since you Put it on???
You know what? It up and died on her the other day, and my mind went there first when it would not start, I pulled it all off and it made no difference. Turns out the battery just died. New battery and back in business.
Did you use the 9 watt or 3 watt lights ? In the reviews it says the 9 get very hot and melt plastic, have you had this issue ? Thank you
probably the 3, they dont get hot at all. When I made this video there was only 1 option.
How far out can u see now with those lights??
hi I wanted to ask you to put them next to compare the sizes of 90 raptors and 700.
Sorry for my English.
I'm from Russia
Nice job.
Tried ths with a 2020 raptor 50 and the lenses are smaller and they will not go back on with the cat eye leds.
Today my wife’s uncle and grandma bought my son a brand new YFZ50 white and i notice something was wrong there.... wait, plastic fake headlight, why?!?! No brake light, seriously.... then i search on web to see if they have a light kit and ur vlog youtube came across which was really awesome!! Curiously how did it work at night i mean pitch black dark out?
It works pretty well, definitely enough to get home and more importantly offer visibility of the ATV after dark. The lights are definitely bright enough but the lack of a proper light bucket and reflector make it uncomparable with a real light setup. There are light bucket sets out there and if you plan on say heading to the dunes and doing any serious night riding I would invest in a set of those. But for a low cost alternative this works just fine for buzzing around my house. Also the very end of this video shows the quad lit up in pitch black conditions so you can see what the output is like. Its about 5:12. Thanks for watching, I appreciate it.
Nice! What LED accent light kit did you go with?
At a crossroads here. I bought the same brake light. I see a yellow, brown and green wire. Which one was the signal wire? Same with switch. I see orange and brown. everything is the same as the links you provided. before I butcher the wiring of this 2013 raptor 90 I am working on, any thoughts?
is yellow the switch/fuse?
I don't remember. Brown is Ground. hook the yellow and green to (one at a time) 12v and see which one is brighter, that will be your brake signal.
I can’t believe those cheapskates at Yamaha went through the effort to design a fake headlight for the 90s but didn’t just put headlights on it... smdh
can i PM you on the wiring, just baught a 2021 raptor 90 cc and found out there is no lights on it , pretty disappointed, i would like to know everything you bought and how to do it , please
Amazon links to all in the video description
Which headlight kit did you buy
@@alessandrocerciello1627 check the video description for the link to all the things I used in this video.
Hey by any chance do you know the gauge size on the wiring ?
Great video, i followed your guide when i installed on my sons 2020 yamaha. But i have one issue, when i put in reverse and brake, the fuse pops. Do you have the same problem? I use a 5a fuse.Can you tell me why it pops ? Accept for that it works just fine. Greetings from Sweden 👍💪🤘🍻
I talking about the tail light by the way...
@@johanwagensjo2581 I cant think of any reason it would pop when in reverse. I do not have that issue. There is no reverse lighting to overload anything. I think I used a 7amp fuse because I bought them for my 700r. Where is the fuse located? It needs to be as close to the battery as possible. My guess is you are tapped in in the wrong place with the brake wire. There is some kind of RPM limit or throttle cut when in reverse. I cant think of any other reason that being in reverse would trigger such an event.
Another thing that comes to mind are possible wiring differences between an SE and US model.
@@EvolVillainRC OK. Thanks! The fuse i placed pretty close to the battery, but you may be right about the wiring. Its both se model and a 2020 so i guess i have to try to tap in on another wire as you say. Thanks again for answering!
Would you be able to share a wiring “cheat sheet” or instructions? Just bought all the same parts and trying to figure out the wiring....switch tap in right place etc. Thanks in advance!
Maybe, you would have to PM or something so I could send a picture. It's not too crazy. Every light has a + and -. Hook all the + together, and hook all the - together, then hook those combined to the battery + and - respectively. Hook the signal wire on the brake light to that green wire I show in the video. Then wire the switch inline between all so it breaks the circuit. Super simple.
I will reach out if I have any issues. Thank you very much, I really appreciate it!
When I tapped straight into the battery my brake light just stays on whether or not the key is on or off. Am I missing a step?
A switch
@@meeshunting2003 lol
For the tail light was your colors brown green and yellow if so which one is taped to the green yellow and which is to battery
yea but I don't remember, I had to figure it out. Brown is Ground. hook the yellow and green to (one at a time) 12v and see which one is brighter, that will be your brake signal.
@@EvolATV I got it thanks for the reply
zwright5402 which one did you come up with for the brake light?
Have a 2009 Raptor. Where does one get the headlights "cateye" can't find them at all? Thank in advance!
links to all in the description!
He meant eagle eye led lights
Could you explain how you did the wiring for the headlights? The lights and on and off switch.
Sure it's pretty simple, all positive leads have to go back to 12v+ and all grounds have to go back to a ground. The switch breaks the connection between the 12v+ connection and the power source. I solder all of the 12v+ together and all of the grounds together to a single line for each. Run them back to the battery and make sure the switch is in line to break the connection on the positive side. (I also fuse the 12v lead at the battery obviously.)
What size fuse did u use for the on off light switch??
@@carlosvictoria9210 I used 5 amp blade fuse and a holder I got from AutoZone.
I am having trouble removing the plastic lenses.
Very good wish you cud do mine
how do you like the raptor so far im in between getting my son a raptor 80 or outlaw 90
I like it so far. It's basically a Chinese quad with some raptor style plastics on it. I might not have bought it if I had k nown that Yamaha doesnt actually build it. so far so good though. Running fine a year later.
thanks thats what i was told eton makes them i ended up getting an outlaw
@@EvolATV I was pretty disappointed when I found this out after I bought it as well! my sons has ran like crap since I bought it (last christmas - its a 2018). So I was trying to work out the carb etc. finally just yestarday I found an actual eton carb kit/rejet kit and got it running descent. Looking to get some lights on it now!!! thanks for the video! I will be using this soon!
How did you do the blue lights underneath?
LED strip lights from ebay
Can you show how and where your mounted the blue led ones please
Does it drain the battery?
Not if wired properly
Look on my atv that I crashed the same atv that u have
What is the top speed on it
no idea, its always been limited because it's ridden by children. I'm guessing 40-50 mph
do know how to bypass or remove the limiter on the 90?
I, in fact, do know how to remove that limiter. Not to sound like a dick, but if you literally typed that question into a google search instead of a YT comment section you would have come up with this link (from a google search) that will tell you exactly how to remove the limiter. Never the less I googled it for you and here is what I found. www.moddedraptor.com/community/raptor-50-80-90-general/14156-limiter-plate.html. Happy free revving!