It is a very subtle effect, and is difficult to pick up on camera, but it is quite unique! You may want to give it a try. Just follow the steps in the video :)
This is a total game changer!! I can't believe I've never seen this. I will be ordering my "Brick" vinyl today. I have got to try this. Thank you so very much Joe!! I sincerely appreciate you sending me the link to this video!! 💯☝🏼👍🏼🥰🤗💖
Great idea...So glad you demonstrated this combo.. However the round design shown at the beginning of the video actually appeared to better demonstrate the embossed look. The red/yel/grn one did quite achieve what you were going for...looked rather flat. But the technic is a winner!
Thank you for watching! It was very difficult to capture the effect on camera, unfortunately.....but, if you follow these steps, I promise you will be blown away with the results!
Please show another video to show the embossing look just like the image at the beginning of video. Maybe because the white brick 600 doesn't stand out. Thanks
Hey didn’t know you could do this!!! It’s now on my list of things to try!!! Didn’t know you didn’t need to use a Teflon sheet! Awesome video I’m officially hooked 😂
If you want to apply Brick™ 600 on Nylon material you will need to remove the water proof coating. We have a video on that here. -Austin ruclips.net/video/T_p1d2i7Sr8/видео.html
Unfortunately, it is difficult to pick up on camera, because it is subtle enough....but, if you follow these instructions, you can see the results firsthand!
lol i think I waste 7 minutes watching this trash haha so where is the “embossed” effect? Actually I can’t see the real figure bellow these unnecessary layers
I don’t see the purpose of the symbol. Furthermore, didn’t see any embossing. Bold move to press with no cover on top. Didn’t see any 2D or 3D....Can’t give it a thumbs up...or a thumbs down......
@@SiserNorthAmerica first what was the purpose of the first round PC second it looked like you just put three color stops on top of it, which made a square. No, embossed look at all?
I just don't see the "embossed" effect on the sweatshirt. Just looks like 3 thick lines of primary colors
It is a very subtle effect, and is difficult to pick up on camera, but it is quite unique! You may want to give it a try. Just follow the steps in the video :)
I thought it was me. 😂
@@SiserNorthAmerica fake. If it is literally not done then it won't be captured lol🤣
I don't see nothing
He’s so gangsta he didn’t use a Teflon sheet 🙌🏽
Can you double the brick for more 2D or 3D effect?
Awesome! Love not only the Siser Vinyl line but your instructional videos!
Thanks for the comment! :)
Would appreciate more vids on brick! I’d love to use it more on apparel, thanx Joe. Jerri
I didn’t know you could layer over the Brick and Stripflock like this! Thanks for the video!
Absolutely! Not a problem, thanks for the comment! :)
This is seriously kewl....I've gotta try this method. Thanks for sharing it.
This is a total game changer!! I can't believe I've never seen this. I will be ordering my "Brick" vinyl today. I have got to try this. Thank you so very much Joe!! I sincerely appreciate you sending me the link to this video!!
💯☝🏼👍🏼🥰🤗💖
You are always welcome, Lorraine!
Love this look! So fun! I’m going to do this with brick!
Thanks for the comment! :)
Love this look, so many possibilities!
Thanks for the comment! We would love to see what you come up with!
Super cool! Can't wait to try!
Did you forget to use the teflon sheet when repressing peeled vinyl or is it not necessary for some reason in this application?
some heat presses are teflon coated, thats probably what happened
I appreciate the information shared Thanks
Glad we can help. :)
Great idea...So glad you demonstrated this combo.. However the round design shown at the beginning of the video actually appeared to better demonstrate the embossed look.
The red/yel/grn one did quite achieve what you were going for...looked rather flat. But the technic is a winner!
Thank you for watching!
It was very difficult to capture the effect on camera, unfortunately.....but, if you follow these steps, I promise you will be blown away with the results!
Can you do this embossed look with layering flock on brick?
Results are not as strong but it can be done 😊
Make a video on how to Print and cut on the stripflock.
Thanks for the informative video!
Thank YOU for the comment! :)
I love it!!
This was such a fun project! Thanks for the comment! :)
This is neat!
Thanks! :)
Please show another video to show the embossing look just like the image at the beginning of video. Maybe because the white brick 600 doesn't stand out. Thanks
We apologize. It is difficult to see on camera, but if you follow my process, you will see the results first hand!
Hey didn’t know you could do this!!! It’s now on my list of things to try!!! Didn’t know you didn’t need to use a Teflon sheet! Awesome video I’m officially hooked 😂
can you layer the brick with another layer of vinyl to give it more of a raised effect then cover it with the stretchy vinyl.
If you wanted, you could try doubling up on the Brick HTV....but we are not sure how well it will all hold up in the wash :/
I realize you can't see the image because of the camera angle. Excited to try this. Can you tell me where I can get the Detroit Image??
can it be applied to baseball jackets ,meaning the brick will adhere to easy weed nylon?
If you want to apply Brick™ 600 on Nylon material you will need to remove the water proof coating. We have a video on that here.
-Austin
ruclips.net/video/T_p1d2i7Sr8/видео.html
That is cool!
Hey Joe, I have that press. Where do I get parts for it :)
Email here: techsupport@hotronix.com
Good information!
Can you do an Emboss look with Foil?
If you are referring to EasyWeed Foil? then, yes! :)
can you use this on a cricut
You sure can! :)
This is 😎
Thanks for the comment! :)
I didn't see the embossed design..maybe you should've cut the easyweed stretch to overlap the brick..🤷🏾♂️..go info though 👍
The Stretch does overlap the Brick....Yes, it was difficult to showcase on screen, but if you follow the steps you will see the fantastic results!
@@SiserNorthAmerica Thank you..I'm definitely trying this
Wack-ass method. Could barely see the under layer. I give this two fingers up!
🔥🔥👍🏾👍🏾
I see u did not cover your Easyweed with parchment paper, so u really do not have to cover it??
I dont see the embossed look.
I don't see the embossing.
Unfortunately, it is difficult to pick up on camera, because it is subtle enough....but, if you follow these instructions, you can see the results firsthand!
that intro...
See nithing at all 😮
Didn’t do anything
Sorry this didn't work for you at first. If you need help on this process please reach out to our team at support@siserna.com
lol i think I waste 7 minutes watching this trash haha so where is the “embossed” effect? Actually I can’t see the real figure bellow these unnecessary layers
I don’t see the purpose of the symbol. Furthermore, didn’t see any embossing. Bold move to press with no cover on top. Didn’t see any 2D or 3D....Can’t give it a thumbs up...or a thumbs down......
That didn't make sence
Any particular questions? Maybe we can help clear up any confusion.
@@SiserNorthAmerica first what was the purpose of the first round PC second it looked like you just put three color stops on top of it, which made a square. No, embossed look at all?
@@staceybrooks5656 the video camera didnt pick it up....this process is subtle, but the Brick 600 HTV transfer will definitely pop
I didn’t like this art work
I don't see the embossed look
unfortunately, it was difficult to pick up on camera, but if you follow my steps, you will see the results for yourself!