Painting steering wheel Emblem with Plastidip | 2014 Toyota Tundra Build

Welcome back to the Channel! Today I will show you how I painted my Steering wheel Emblem with black plastidip! it was pretty easy and straight forward and something I think anyone can do! let me know if you have any questions
This description contains amazon affiliate links. If you click on one of them, I'll receive a commission. I Currently don't make any money from youtube as i haven't met the requirements to become monetized so this is a small way to help my channel! Thanks
Tool and Products i used:
Plastidip* - amzn.to/3PiO0s9
masking paper - amzn.to/3EJiSgo
Trim Tool Kit - amzn.to/3R6NHmU
Painters tape -amzn.to/3R2zkQk
Crocs - amzn.to/44zvrpc
*I recommend getting plastidip at Walmart or any retail stores similar as it tends to be a lot cheaper
SUBSCRIBE to my channel here!
/ athenaoffroad
Tundra Build Playlist here:
• Toyota Tundra Build
Watch My 400ex Adventures playlist here:
• SINKING THE HONDA | TR...
Watch my 400ex Build playlist here:
• PROJECT HONDA TRX 400e...
Watch my Sportsman 450 Build Here:
• Sportsman 450 Build
#tundra #chromedelete #diy #toyota #budgetbuild #blackedout
Disclaimer: I am not a professional and therefore not responsible or liable for any damage that you cause your own vehicle. If you can not figure out the problem take it to a local mechanic

[@AthenasGarageOffical]

I now have members! Join my channel for .99 cents a month to help support the channel and get quicker responses from me, and even get early access to my videos before i post them publicly. Become part of the Athena gang!
Join Here: ruclips.net/channel/UCAC113VwtSVv8hbhPlGiZKgjoin

[@OconRecon]

Didn't have to exacto knife the edges at all? That's nice.

[@AthenasGarageOffical]

I don't think I have one actually

[@kenhiett5266]

I was thinking about doing this same thing inside my Tesla, but like your Toyota, there are several other trim pieces that would need to be blacked out to make it look consistent. I think I'll just stick to the blacked out emblems on the outside instead. Every example I've found on doing this to the interior doesn't achieve better aesthetics like it does on the exterior.

[@AthenasGarageOffical]

I can understand that. I like to do more on the interior of this tundra but at the moment I can't find the time to, and it just doesn't seem like it's worth the time for the end result of the look

[@genoarceo5608]

Lookin good. 👍

[@AthenasGarageOffical]

Thank you!

[@PianoManCamille]

Why not just tape of the whole perimeter of the emblem? Why leave the edges? Will it come out fine if I tape the whole border off or do I have to do it this way?

[@AthenasGarageOffical]

Plastidip works better if u leave a small outer perimeter and can peel it off after it's dried some. It will cut itself on the emblem it's pretty good stuff esp for emblems like that. I have a few other videos that explains it more

[@PianoManCamille]

@@AthenasGarageOffical also would it adhere to the surface better if I sand it down with 1000 grit sand paper a little before applying plastidip?

[@AthenasGarageOffical]

Yes it will, also if you add a small amount of like armorall or something similar to the outside of the emblem where you will be over spraying it will come off even easier. Just don't get it on the emblem as it will not stick

[@caplusmusa9470]

Great vedioe,how long does it last?

[@AthenasGarageOffical]

Still on there now, hasn't faded, peeled, or even scratched.

[@sd2lv]

You should remove the horn fuse before doing this so you're not annoying yourself or your neighbors.

[@AthenasGarageOffical]

That's a really good idea!

[@tr984]

Don’t do this guys this guys not smart

[@AthenasGarageOffical]

Worked for me 🤷

[@Davox05]

there´s no need to be rude man...😕