I watched your original review the other day and it convinced me to get it. Fast forward, I just got mine tonight and I came across this looking for how to configure it wired. Not only was I already sold on the multi connections, but THIS EASTER EGG. SO GOOD. I DIDN'T HAVE TO BREAK IT TO PLAY ON MY TABLET. The value for me skyrocketed. Thanks, man! +1 sub 🥰
Amazing discovery! I bought the controller after watching your video. Now I’m using it with my Galaxy Tab S8+ and it totally works. Thank you so much for sharing this!
@@fernriguez8584 Haven't used it super intensly, but has been holding very well. Extenidng and contracting and I don't see any physical damage or error. All great!
Surely putting a longer flexible cable that could stretch and charge both sides of the battery would have been a more thought out design. Seems ondd that you can't charge both sides unless it's closed?
It’s daisy’ed, so it doesn’t stop you from using both or only one. A flex cable would’ve been a much bigger risk for defect, especially with the intention of making it much larger.
@GameTechTalk but does it mean whenever you're using it and the controller is even slightly apart, only one side is being drained/charged? Or can the left hand side still provide power when it's in open mode?
@@andytrace The way I've observed it is the controller is able to take from both batteries when in use but if you plug it in while gaming, the chain is not present, so the left side (if I recall) does not get charged, though it can be depleted. I hope that helps, cheers!
@@GameTechTalk ah ok, not sure how that works unless the left battery only powers the left sticks/D pad.. But then if that side runs out you can't plug in and play at the same time if the power doesn't get to that side because the connection is stretched open. Mine will be turning up in a few days, I'll run some experiments.
Are we sure this is an intended function and doesn't break the device? secondly, how is the stability win this modern when u use it on a table for example? i assume that there's no hold anymore cause the back rest is dysfunctional? thx for the good video keep it up!
GameSir most certainly saw how that propelled sales and general interest with the G8. The G8+ having it be part of the design cannot be a « happy mistake », it’s very much intentional. As for the hold, it is surprisingly, dare I say shockingly great. I’m sure someone that understands physics could explain the phenomenon but I think it has to do with how strong the « squeezing » of the controller is on the tablet, having the back panel be disconnected is of no concern and no it doesn’t suddenly make the controller flip backwards.
@@Supermrloo Well, there is technically a controller they hinted a few weeks back specifically for the latest iPad. A part of me does wonder if they are actively working on an upcoming controller and a part of me thinks maybe they have negotiated a properly licensed first party iPad controller. It would be a bit long to explain here but all in all, there was a white G8 in the wild at the last CES that was MFi. So maybe they are working with Apple to find a time and a place to release such a product? Just speculating.
@@GameTechTalk Really hope we will see something that "officially" supports 11inch tablets. It is weird that doesn't really exist since 11inch is the most common tablet size. With emulation being a thing now on iPadOS, a telescopic controller would be incredible to breathe new life into my iPad Pro 11 (A12Z).
Looks ok but it’s a shame to loose the headphone jack and now need charging. Main interest for me is that on my legion y700 it’s often a pain to get the controller to connect over usb. I would want to keep having to fold down to charge both batteries though so I will probably solder longer wire between those pads
The left side LED around the "mode" button blinks red when trying to charge while opened, most likely to indicate that it is not receiving power but I would think at least that the left battery does not hinder the operation of the left side but rather gives extra juice to keep afloat whenever closed. I still haven't test that though so I'm not completely certain this is how it works but without a doubt, bridging the pads would do it. Cheers! :)
I just got mine and I think i got a lemon :( After expanding it, no longer retracts all the way. A piece of it on the left stays popped out. I didn't dismantle it but I took a look inside with my phone's light. It seemed like one of the bottom two springs was connected in a weird place. One of them criss crossed over the other. Not sure if that was the issue. Amazon, at least in this case, is sending a new one.
Glad to know you had a solution that is hassle and trouble-free. It's a fine product so I hope you get to indulge in all it's glory sooner rather than later!
I'm glad you posted this, I went out and got the Galileo G8+ for my Onexplayer X1 AMD like in you video.. however I think you missed that the Gamesir completely blocks the air intake on the X1. 79c w and climbing out of control when gaming vs under 60c. I'm posting up a mod to reddit now that solvew this but it does require drilling out the Ganesir G8 rear.
I just slide it up or down based on the device, for example, the Minisforum V3 has the vents at the top. With that said, link your mod when you post it, would love to see what you engineered, cheers!
Do you think it would be hard to find a way to fit a phone peltier cooler in the middle of the G8 Plus? But I am using a Fold 5, which would be able to use a cooler with the G8+ anyway.
It would be yes. That said, by pushing the coils aside, it could be feasible. I could imagine a talented 3d printer designer to make something for that exact motive, that said, as you pointed, the compatibility for various devices would be complicated.
There are no vibrations with the official PS Remote Play app, that is not due to the controller however, it is because the software does not support that feature. To fix that issue, you should remote with an app called PS Play. That one offers extra and better features, one of them being vibration support. Cheers!
@@GameTechTalk Thank you so I'm waiting to receive the controller and I also ordered the S9 tablet I'm going to enjoy it I'm going to sell my PS portal no longer needed and it's all thanks to you thank you again
I'll come back to you I received the controller it's great with an S9 tablet except that I don't have the vibrations when I play Xbox game pass or on GeForce now you know what to do thank you
@@alexous5237 For Xbox Game Pass, Google something called BetterXcloud. As for GeForce Now, I have no clue and completely unaware as to if the app even supports rumble at all.
It does yes though I must admit, I don't feel as comfortable sticking such an expensive device in the G8+ but that's not to say I haven't done it, I've done it quite a lot actually.
So you were pretty excited to try this controller on your Minisforum V3, which leads me to my question. Has your opinion on the V3 changed? Kinda seems like you didn't like it that much in your earlier videos.
I wouldn't say all that much. Not liking it is a bit more than how I feel about it. It's not a bad device, it's just a very "specifically for" type of device and I think after having tested it thoroughly that I simply am not the target user. But it's not bad, it's actually quite good, but it also is overhyped in many of the areas that were the most important for me personally, which is gaming.
@@GameTechTalk Thanks for the reply! Well, I decided to go a little crazy and I've ordered a V3 along with the G8+. The G8+ has already arrived. I still like the Kishi Ultra more, but the G8+ can stretch to the V3's size. The "specifics" of owning a device like this I think are for me...I need a backup PC for my graphics work on the road and it can do gaming. This seems more convenient and portable than a laptop and I don't have to rely on finding a bigger screen. Hope this goes well.
The original G8 does require a bit more effort to get it to crack open whereas the G8+ has a small opening "tab" so it is literally built in the design.
Last question...regarding psplay app , it has inside its settings an option for vibration that when you touch it you can select "rumble " , in this way, the D9 bsp gamepad bluetooth rumbles. However what about the g8 plus ? The fact that it has haptic rumble could have rumble function working directly..., could you check it? If it does not rumble inside settings psplay app you go to vibration, touch it , and choose an option...there Must be haptic rumble ,rumble etc.. Could you try it please ?
Hey Andrew! I have used the G8Plus many times with PS Play and yes, the rumble works perfectly fine. In PS Play, you have two ways to get rumble, you can redirect it to the haptic motor of your phone, or to the controller, if the controller you use has rumble motors of course. Seeing as G8Plus does, it works but you have to make sure to be on the PS Mode, the Switch mode won't rumble.
@@GameTechTalk oook thanks. To make G8 rumble itself (being in PS Mode) did you set up or enable one option in psplay app?? (Or maybe due to g8 plus has haptic rumble the gamepad rumbles directly) because with the D9 bsp controller, I had to go in psplay settings, look for haptic rumble and select rumble also. Could you how did you do it with G8 plus? Thanks man so much for your invaluable support
@@Andrew-Night I had to yes, I’m not home to check at the moment the name of the setting itself but there are two, one directs rumble to your phone, the other to your controller, you select the one for the controller for rumble to work on the G8Plus. It might also be activated by default, I can’t tell as I’ve been using this software for well over a year.
I wouldn't walk around for two hours with my arms upright but I can definitely hold an entire COD M match, if not two and rest with my arms on an armrest after the fact.
Saw this demonstrated on Facebook for the G8. Was wondering why no RUclipsrs were talking about it and were disassembling the device instead. I also did this on the X2. Now the only problem is not damaging the coils. I stretched my X2 out beyond repair by torture testing it. Yeah, don't do that 😅.
The X2s-es don’t have as much coil wire and much like you said, it will inevitably keep a “stretch” if used on tablets. However, both my G8 and G8+ haven’t had that situation occur. It seems like they can better withstand the “beating”.
My G8 has a coil that is slightly stretched but I don't think it's from the stretching itself but rather from me dropping it while it was opened (yeah I did that) and the springs got pretty tangled. But otherwise, my regular G8 stayed on a tablet for nearly 3 months consecutive so as far as I am concerned, this controller can definitely take the long term "stretch" exposure.
I bought the one that comes with the extender, but... How do you change it back from tablet size to regular phone size? Do you have to break it down again, taking screws and cables out just to change the length to fit a regular phone again?
Hmmm, I'm not sure what you are referring to "the extender" but assuming that it is a 3D printed piece of plastic to keep it opened, I would assume that all you have to do is to remove that piece and it'll close back together easily. Could you tell me where you acquired that "extender"? Tell me the place, also, I think RUclips blocks links, hence why letting me know will probably be good enough and I'll google it. Cheers!
@GameTechTalk • I had to disassemble the entire controller to see if I could make it smaller to fit my ZFOLD6. 🤦 I send it back to get the regular one you have. 🤣
@GameTechTalk • They sell the regular Galileo G8 PLUS for $79 and the Galileo G8 PLUS with expansion kit already installed for tablets $120 on Amazon. (But I already had the old Galileo G8 one, moded for my tablet anyway)
I'm thinking of buy a rog z13 (2023) with an nvidia rtx 4050, and using this controller. How do you think it can work? The weight vs the minisforum v3 is 1.18 kg for the z13 and 946g for the minisforum tablet. I understand that due to the weight and size it's not going to be as comfortable as a legion go or a rog ally, but I want to know if your experience using this to play with the minisforum v3 was satisfactory, if it's really useful for playing, if the controller holds the tablet well
I mean, fortune favors the bold as they say and I think boldness would effectively be necessary to give this a try. Technically, this will work, the one thing that makes me hesitate is I don't know how rounded the corners are on the back of the Z13. I couldn't do it with the Legion Go for example because the corners at the back of the device were too angled. I've actually game quite a couple of times with the iPad Pro 13 and the Minisforum V3 using this setup, it's more pleasant on the iPad Pro but it's definitely feasible with the V3.
This guy did it with the X2S as well not really a new feature or easter egg lol just a design flaw that can be used to do what you just did good on them for creating a Bluetooth controller like this form factor though, however does it play COD Mobile natively? I watched your review about it but forgot to ask that.
Hey waddap mah dude! I hope everything is good on your end. So I tested it for you, it does work just fine, CODM that is, CODWarzone as well. My understanding is, CODM will work with properly spoofed wireless controllers, any one of them. It's the wired ones that have issues and somehow only work with Backbone. Now, as long as you don't ask me if I did good with the controller, I think that is the question duly answered! 😅
@GameTechTalk hey 👋 everything good over yonder! Yes CODM is one of the big ones I test right away myself because I know some Bluetooth drivers don't support the Xbox controller (Xinput) mode. Gamesir Aileron which is an awesome controller sadly wouldn't play this, it's not the end of the world though because it's the only game I know of that requires the Xbox driver lol. Also I'm hitting you up with an email soon 😁
In terms of width, it will. The hesitation to say outright yes is more dependant on the thickness. If the USB-C connector on the laptop is too high, you might lack the depth for the connection to be achievable.
Thanks for the updated review my man! Man I'm tempted but my only gripe with all the mobile controllers on the market is that all the controllers seems to follow the xbox form factor even Backbone (which has license with PlayStation btw). Wish there is a controller which has PlayStation's form factor instead (both analog stick being low) as I prefer my hand placements to be that way 🥲.
Right, symmetrical stick placements. You are right, there is extremely slim pickings of those in the telescopic controller space. I do wish we would see more of them, thankfully that market space is greatly picking up pace. I'd be here for it too, I like both at this point.
Kinda wish they kept the USB-C functionality whilst adding bluetooth rather than taking one out to put the other in. Nothing quite like a direct connection for latency. Plus bluetooth (no matter how good) is always going to have noticeable lag for gaming.
Amazing video! Thank you fro trying it out with the Win Mini 🙏 Which mobile controller would you say works best for the GPD Win Mini since this one doesn't fit as well?
Ouf that's a tough one, in terms of a telescopic one, really other than "mod 3d printing" a plastic lip to be able to install say the X2s BT or G8+, I don't see what else. The Scuf isn't able to receive this thick, same goes with the other two I listed, so it'll only be feasible with some extra efforts.
PS Mode (Capture + B) and Switch Mode (Capture + Y if I recall) should both work without issue on PC. The hidden Xbox mode won’t, neither will be the G-Touch mode.
@GameTechTalk thanks. I'll try them out again. I noticed that they do connect however the button inputs are different. When I press a specific face button in any of the modes, they either register incorrectly or not at all. Thus my question
@@AlfaM03 Ahhh yeah, that’s because the Nintendo Layout (BAYX) is different (ABXY), however, you can flip it in mere second with a shortcut or with the app. Sorry I don’t remember the shortcut but its something like Hold GameSir button and A for like 3 seconds and it flips. Cheers
Amazing! I got this controller because of this video. I can't believe there isn't a gamepad made to fit large tablets already. I'm probably going to trade in my tab s9+ for a tab s10 ultra when it comes out supposedly in October because of this mod. I hope Gamesir reads the writing on the wall and makes a gamepad that fits the tab ultras without mods. Do you keep the pieces separated when not using the gamepad? It seems a little weak to store it like this, but I'm scared to keep doing this mod and possibly cause damage over time.
The springs in the back holds the controller together in one piece, they never come separated per say and to put things in perspective, the G8 (this controller's predecessor) is basically the same body and inner workings for the mod and that controller stayed for, no exaggeration, 4-5 months steady on my Tab S8 Ultra. Since then, I removed it of course but it still works just fine, it didn't suffer any particular damage or anything like that. They are built very robust and from where I stand, you can feel at ease to put this on your tablet without issue. If you want to push it a smidge further, people even mod inserts to put over the coils so that the controller is permanently stretched. However for this controller, it may cause to lose battery autonomy as it needs to be closed for both batteries (one on each grip) to fully charge.
Lol I was watching the older video and commented its modable with flex only to realize u figured it out this one without needing flex cable. Yes nobody should be supporting or buying usb c gamepads they only restrict us from using it on tablets there is no visible effect on bl5+ devices.
Does the G8+ fit the S8 Ultra a bit better (meaning it sits flush and evenly)? I have the G8 but i love the all black color and if it would fit flush on the device I'd sell my G8 for the plus!
It does and while there are devices I wouldn't necessarily recommend with the G8+ because they are too thick, for example the Legion Go or Minisforum V3, I definitly have been having a flawless experience with the iPad Pro 2024 13" and the Tab S8 Ultra. The coil system does a bang up job at keeping a very tight hold on these thin tablets, even when I have the back cover on by the way. It's pretty awesome!
Actually got my G8+ in and it's been awesome, I was curious if you know if Gamesir has any immediate plans to sell different magnetic styled buttons (a SNES one would be a dream come true!) or magnetic front plates in the style of retro consoles?
The only thing that would improve it for me is if the joysticks were more in the playstation style orientation, they have an older controller, i want to say the t3 maybe? It would be perfect to base it on. I have the regular g8 and i like it alot, i just prefer playstation style for positioning the sticks
I don't get this excited often about hardware but GameSir literally had me jump up and down like a kid on Christmas. To think this got past me made it that much more fun to discover! (tks to Retro Tech Dad)
Nope, the coils carry data and seemingly, this does not seem to be interfered by with human contact. I wouldn't know about metal or liquid but human? Good to go. As for a 3D printed cover, they already exist for the G8, heck they can even be bought on Amazon. So it's really a question of time for G8+ specifics if it doesn't already fit with the G8 ones. Oh and yes, it does fit the X1 just fine! Absolutely crazy stuff. GameSir need to be making a PC app.
Awesome , you are BREATHTAKING!! THANKS However, there is something I am missing ... XINPUT...(Xbox Controller Mode) Two questions please : 1 does the G8 plus Rumble when you use BetterXcloud on android ?? (Wireless /bluetooth) Or just wired? Perhaps using the Dual shock wireless Mode makes BetterXcloud rumbles...it is worth trying this also. 2 ok Windows, Does the G8 plus Rumble using Xcloud or Xbox installed games? If so, which Mode do you use ?? I really Hope Gamesir includes the Xbox Mode bluetooth soon
Pleasure is mine, ok so before I even got into a game using BetterXCloud, it showed an icon of the controller with a checkbox with Vibration, indicating it was supported. I tested with Forza and lo and behold, the moment I hit the gaz, RUMBLE!! 😊 I tested on the PS4 mode, fully supported, fully functional (Switch mode you would've lost the analog triggers). As for PC, that's where things get a little more complicated. If you plug in using cable, and you hold Capture + X, as I addressed in my review, it will effectively switch to X-Input, no need to wait for a firmware update, it does it now. However, if using wireless, you can still seek connection on X-Input mode but other devices do not seem to see it when scanning, maybe they left the SSID invisible to prevent access? I can't say for sure. So you have another solution, if you connect wirelessly on PS Mode and you use a software called ViGem on PC, you can convert any controller to Playstation protocol, or X-Input protocol, and vice versa. So the solution then becomes to connect using the PS Mode and with ViGem, change your controller protocol to X-Input and voila, this will work without issue with Xcloud or any other else games that would require it like Gamepass titles. There may not be a wireless X-Input support officially from GameSir, and again, I would be 100% sure that the reason is Microsoft licensing, hinting a potential Galileo G8 for Xbox model in the future but if there is, much like the X2 Pro, that model will most likely have less features in terms of modes, but it could have both triggers and grip rumble, that would be cool! Anyway, I'm getting sidetracked here, I hope this helps!
@@GameTechTalk thanks again , so focusing just on android /BetterXcloud You said that the Xbox controller was checkout with vibration and It Rumbled, but, how did you Connect the G8 plus to BetterXcloud?? Wired ? Or Rumble can work wirelessly?? If so, what bluetooth Mode have you used? If you enable dual shock 4 Mode wireless, does the Rumble work on betterXcloud on android ? My main goal is making the G8 plus Rumble working and the Gamepad connected wirelessly when playing BetterXcloud.
@@Andrew-Night On BetterXCloud, I tested wirelessly using the PS Mode and yes rumble worked perfectly fine. For PC, it works wirelessly as well but if you absolutely need X-Input, you'll have to use ViGem for the time being. Cheers!
@@GameTechTalk oh..GREAT!!! So you mean...you enabled the DualShock Mode (wireless/blue color led) and when using BetterXcloud app on android, the app recognized the G8 plus as a Xbox Controller (pop Up message) with vibration checkout, right???? (Rumble fully working ) Could you confirm me this last time please ? (A video explaining showing and clarifying how to make this G8+ rumbling with BetterXcloud would be very helpfull) Holly Molly, It is awesome. Very good news I am imagining the G8 plus rumbling on a S10 Tabs Ultra ...(Using BetterXcloud) This Gamepad G8 plus is a dream come through
Yes but no, the app recognized the controller as a PlayStation, it even called it as such, but the app converts it so that it works with Xcloud so you are right in a sense but really, it's the app that is doing the heavy lifting. Exactly like that ViGem I told you about, BetterXCloud basically does the exact same thing. Just know that it works, everything does, including rumble and analog triggers. Cheers! :)
Can u do video showing how to connect to pc and will it works with games Because i had nacon mg x pro it connect to pc but not work with games In games not recognized .......?
Quite frankly, I love this controller so much that I might do a game showcase, if I do? I'll include a connection guide but it shouldn't have the problem of Nacon since it can be spoofed as many different controllers. Cheers! :)
I am under the belief that GameSir does not consider that as a defect but you may want to reach out to be certain. With that said, I have had countless people tell me that this had zero impact on their coil system, except for the X2s (wired and BT) but for G8 and G8+ (as well as Abxylute S9) so far, it hasn't been a problem for me and these controllers are full-time on a tablet in my case.
@@Liranpe94 You could put a velcro to keep it shut completely and when you want to go tablet mode, undo the velcro. Plus, it'll give you a nice felt backing to protect your phone/tablet. Worth trying I think!
should i get this over bsp d8 pro for my 11inch tablet? since bsp d8 pro cost half of the price, and doesn't require any modding at all also if we do mod g8+ permanently, only 1 battery will work and that is not cool
The D8 Pro will work for an 11in tablet. I would still recommend confirming width of your specific tablet to be safe but I am certain it'll work. As for G8+, indeed, modding it permanently will basically render the ability to charge the other battery impossible. At least not without some other pretty serious modding that would require to re-route charging cables.
@@GameTechTalk hey what about memo s3, is it any good for 250.5 width tablet?or maybe i should just get the handheld like powkiddy x55 or rg556 i only want moonlight streaming (nvidia gpu) the telescopic controller seems to have too much problem for 11 inch tabs g8+ : half battery due to mod bsp d8 pro : quality issues??? memo s3: no battery also i prefer BT over type c also thanks for replying and helping us out in comments
@@J.D.Vision Not necessarily, basically you have to grab the full cap with the skirt, that should be extremely compatible. I have a bunch of them that I would buy to mod 360 and PS3 controllers, they still work as it's the same format, but lately, we're starting to see some different ones so yeah, compatibility may be a hit and a miss.
Put the desired mode (Capture button + B for PS Mode for example), hold the small round button next to the USB-C to enter pairing mode, grab the bluetooth signal from your Windows Tablet. That ought to get you situated. Cheers! :)
Yeah but this is been done with the other models im surprised people are just now finding out , I've done this with the Redmagic version paired with a y700 tablet
The difference with this one is that people did not expect it to be possible due to the fact that there are a battery on each grip, it was assumed (at least by me) that the connector daisy-chaining both batteries would prevent the mod from easily being done but as it turns out, it is feasible without issue because they thought of that. I must commend GameSir on thinking ahead and giving such awesome easter eggs to buyers of their products!
@@GameTechTalk Gotcha, I have the Plus model coming in tomorrow but man does that kishi ultra look great to be paired with something like the razer Edge, but the price is like a PlayStation Portal 😫
@@JAYJAY1787 Yup, Razer is on a mission to throw consumers into a recession. Joke aside, it's a good controller but it's also crazy to think that you can buy an Abxylute S9 and a G8Plus for the price of one Razer Kishi Ultra, and both controllers are superior to it... I'd love to be able to laugh at that but it's getting very concerning.
@@GameTechTalk Dude got my controller yesterday, they definitely did there thing on this absolutely Amazon! I'm definitely going to get a grip for it as it's a bit slippery but other then that it's a must have!!!
It does work. “Well” is subjective. I wouldn’t trust something as heavy on a G8+ when laying on my back but it definitely has a good enough hold on the X1 Mini to actually play with that controller.
😉 I would’ve been happy to test it if I hadn’t but yeah, I’ve retested again since and I’d stick to the same which is that those angled corners either make the G8+ too likely to slip out, or to have a 3D printed piece to provide a superior hold on the Go. Cheers!
I have, that was a subsequent model that GameSir licensed and produced for RedMagic approximately 3 months after having launched the Galileo G8. They launched it with the RedMagic 9 Pro if I recall? It's exactly the same as the Galileo G8 minus the color difference, but branded with RedMagic stuff on it. Basically a repackaging, rebranding, recoloring. Were you looking to buy the Shadow Blade 2?
@@GameTechTalk Yeah I was thinking about buying it because I hate the color of the g8 galileo and I like the colors of the g8 plus but I don't like it bluetooth only
@@The_Supreme_Savage Ahh then you should get exactly what you're looking for. How I wish they would just sell faceplates and buttons though! I almost bought a Shadow Blade 2 just because it honestly still has the best color scheme to this day.
So I just got mine, I connected to my Google pixel 7 pro through Bluetooth but when I try to play cod mobile it don't activate IG, do I have to screen map? When I tried that through the app it wouldn't work EDIT, i fugured out the screen mapping but idk how to get the screen mapping to be playable. Very strange. I have a Google Pixel 7 pro so it's definitely not my phone. I had all the buttons mapped where i wanted them but i didn't know what to do from there, do i stay connected to gamsir mapping or what
No, you should be fine playing CODMobile as long as you use bluetooth, but some modes may not be compatible, try connecting with the blue light (Capture Button + B) to your phone, that ought to do it. No mapping should be needed.
Your prev video that its not moddable made me waste 2 days searching for 8 inch tablet and loss of 2k inr for getting a loan to get this 8 inch tablet. Thanks for atleast making this video and correcting. Now I can use my 10 inch tablet I have with it.
I am terribly sorry, I assure you, if I had any idea, I would've addressed it in the original review. With that said, I'll make sure to further expand my "physical" testing in the future to prevent situations such as this one. Thank you for your support and understanding.
Latency has been superior on the G8+ versus the G8, crazy I know and the one reason is due to polling rate. Granted, there is a bit of jitter but in optimal settings, you're still 4x the latency on the G8, 8ms versus 2ms average. Of course, -if- the G8 polled as high as the G8+, I wouldn't be saying that but... it doesn't so that's a win for the G8+. For everything else you named though, you are right. Personally, I lean more on the benefits the G8+ has that G8 don't, like USB-C (female) wired support, Switch support, rumble, swappable buttons, gyro enabled, and outright better internal performances. Better compatibility with cases too. I hear you but to me it's trading a bit of convenience for a truckload of features, a fair trade in my personal opinion.
People talking Bluetooth latency, what piece of crap hardware are you connecting controllers to ? You don't hear anybody on the Xbox one/series or Playstation 3,4,5 people complain about their wireless controllers right ? Get off the fact that "bluetooth equals latency/hassle" - it's not. The G+ also has rumble and gyro , you can use it on the switch instead of docked joycons for more comfort without losing gyro aim.
@@GameTechTalk Everything about this controller is so awesome down to the smallest details like the polling rate and the auto on and pairing when extending the device. Which is why I am so sad that I have to return it, I get painful hand cramps after several minutes of playing which I think is from a combination of the heavy weight and my pinky finger not having a good grip on the handle. Other smaller controllers without a place to rest pinky and ring fingers don’t give me those cramps probably because they are so light. I also prefer a mushy retro d-pad with symmetrical sticks like the sn30pro and +. I’ll just be here narcos waiting meme until 8bitdo makes a telescopic controller.
@@Anthony-zl9ow Aww man! I can understand, I had my own occasions of having a product that has all the makings of something I want, but unfortunately just doesn't work for me. Sorry to hear but glad you at least got to experience it firsthand to give yourself a fully formed opinion. As for the 8BitDo Telescopic meme, they have got to see the market growing, hopefully in due time, they'll dare to tackle it. If ASUS, Razer, Scuf, to name a few, can see the potential, 8BitDo ought to realize they have a loyal following and that A LOT of people would jump on a product if they did put one out. So consider me part of the movement! 🤣
It definitely caught me off guard, and that greatly pushes it to pole position yes. It's soooo fun to find easter egg on hardware! It's a very rare occurence and GameSir nailed it by not mentioning that feature at all!
Sure you can, however I originally thought G8+ wasn't going to be able to do that because it runs a specific cable to daisy-chain the batteries. Of course, GameSir had a plan to address that and retain the easter egg from G8.
From France, i’ve seen your video a lot of Time, it’s creazy !!😮, I ordered one, ( 😂😂amazing!! You make my english beter)! In my opinion you’re SO RIGHT to be Like that 🔥🔥🔥 C’est la folie !!! Wait g8+ for my s tab 9plus . On est al!!!!! 🙏🫨💪🤝
@@GameTechTalkyo bro, Tu es sûr que le controler fonctionne toujours après le casser? C est pour ma Samsung tab s9+, j’attend la manette, Je pense qu’il y a un câble d’alimentation qui est rompu quand tu fais ça…
@@sofianeworonka9964 Le cable d'alimentation dont tu parles n'est pas "rompu" la connection n'est tout simplement pas effectue lorsque la manette est ouverte, partiellement ou completement. Ce sont des "pogo pins" qui servent a charger la batterie de gauche car sinon par defaut, la batterie de droite est "maitre". Tu peux enlargir la manette sans aucun risque.
If you mean the software on its own, no, you just grab it from the PlayStore. If you mean the screen mapping software? Yes. That's not specific to GameSir though, other mapping softwares have you do the same, it's even more complicated on some of them.
Try connecting while on the PS mode, hold capture + right side face button for a few seconds, the light will turn blue and only then should you pair it. Cheers!
@@Krrr90 For the G8+, the Kishi Ultra is good, don't get me wrong, it definitely is. But there is just simply ZERO reason to go Ultra with the G8+ in existence. It has rumble, it has gyro, it can be easily modded for larger tablet support, it's got better polling rate too. You know the only thing the Ultra got over the G8+? RGB. That's it. Only thing. Not even joking. If I was to flip, that list would simply be too long.
Indeed. The gyro only works if you connect the controller directly to your PS5 and that's only for PS4 games (since G8+ spoofs as Dualshock 4) and the connection breaks after about a minute. So gyro from the controller level is definitely working, for Remote Play, I think the issue is the software itself.
I definitely did! THEY PLAYED ME. 😂 You gotta see it like I did, I see two batteries, I see a cable going right down the middle, in my mind, I was like: "Yeah that cable gets in the way, it can't be done". I wasn't expecting this AT ALL. I got duped!! 😂
Unfortunately I have no way of confirming that information but I did read somewhere that fire sticks apparently had issue with X-input. With that said the modes found on G8+ are Switch Pro controller and PS DualShock 4 mode, so if these two controllers work on the fire stick, so does the G8+.
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
They turn the telescoping controller into a fucking Hubble Space Telescoping controller.
😂😂😂 Dude, comment of the day for sure! This just cracked me up so much!
I watched your original review the other day and it convinced me to get it. Fast forward, I just got mine tonight and I came across this looking for how to configure it wired. Not only was I already sold on the multi connections, but THIS EASTER EGG. SO GOOD. I DIDN'T HAVE TO BREAK IT TO PLAY ON MY TABLET. The value for me skyrocketed. Thanks, man! +1 sub 🥰
Happy to have been of service and to count you as a sub! Thanks for kind words!
Look at that beautiful Pop N Lock. 🔥🔥
Pop N Lock Babyyyyyyyy!!
@@retrotechdad I recently got the controller but I'm having some difficulty popping out out. Any tips to do it consistently? Thanks a lot!
Amazing discovery! I bought the controller after watching your video. Now I’m using it with my Galaxy Tab S8+ and it totally works.
Thank you so much for sharing this!
Great to hear! Happy Gaming!
Dude, I just ordered it for my s8+ how has it been holding up
@@fernriguez8584 Haven't used it super intensly, but has been holding very well. Extenidng and contracting and I don't see any physical damage or error. All great!
Thanks for the input!
Spreading the good word! 🫡
Thank you for your review.
i just ordered it thanks to you.
You made the best review on this product!
Wow, thank you so much! It means a lot and I wish you many hours of gaming fun on your setup! 😊
@@GameTechTalk thank you :-)
Surely putting a longer flexible cable that could stretch and charge both sides of the battery would have been a more thought out design. Seems ondd that you can't charge both sides unless it's closed?
It’s daisy’ed, so it doesn’t stop you from using both or only one. A flex cable would’ve been a much bigger risk for defect, especially with the intention of making it much larger.
@GameTechTalk but does it mean whenever you're using it and the controller is even slightly apart, only one side is being drained/charged? Or can the left hand side still provide power when it's in open mode?
@@andytrace The way I've observed it is the controller is able to take from both batteries when in use but if you plug it in while gaming, the chain is not present, so the left side (if I recall) does not get charged, though it can be depleted. I hope that helps, cheers!
@@GameTechTalk ah ok, not sure how that works unless the left battery only powers the left sticks/D pad.. But then if that side runs out you can't plug in and play at the same time if the power doesn't get to that side because the connection is stretched open. Mine will be turning up in a few days, I'll run some experiments.
Are we sure this is an intended function and doesn't break the device? secondly, how is the stability win this modern when u use it on a table for example? i assume that there's no hold anymore cause the back rest is dysfunctional?
thx for the good video keep it up!
GameSir most certainly saw how that propelled sales and general interest with the G8. The G8+ having it be part of the design cannot be a « happy mistake », it’s very much intentional. As for the hold, it is surprisingly, dare I say shockingly great. I’m sure someone that understands physics could explain the phenomenon but I think it has to do with how strong the « squeezing » of the controller is on the tablet, having the back panel be disconnected is of no concern and no it doesn’t suddenly make the controller flip backwards.
@@GameTechTalk I think the take home message is why didn’t game sir design it for larger tablets, at least to 11 inches?
@@Supermrloo Well, there is technically a controller they hinted a few weeks back specifically for the latest iPad. A part of me does wonder if they are actively working on an upcoming controller and a part of me thinks maybe they have negotiated a properly licensed first party iPad controller. It would be a bit long to explain here but all in all, there was a white G8 in the wild at the last CES that was MFi. So maybe they are working with Apple to find a time and a place to release such a product? Just speculating.
@@GameTechTalk Really hope we will see something that "officially" supports 11inch tablets. It is weird that doesn't really exist since 11inch is the most common tablet size. With emulation being a thing now on iPadOS, a telescopic controller would be incredible to breathe new life into my iPad Pro 11 (A12Z).
Nice. Does this damage the spring if using it with iPad long term ?
Now I really need this controller!!!
Right?!?
Hell yeah! props on them for having such a awesome feature.
Big time! Thanks for watching btw
Looks ok but it’s a shame to loose the headphone jack and now need charging. Main interest for me is that on my legion y700 it’s often a pain to get the controller to connect over usb. I would want to keep having to fold down to charge both batteries though so I will probably solder longer wire between those pads
The left side LED around the "mode" button blinks red when trying to charge while opened, most likely to indicate that it is not receiving power but I would think at least that the left battery does not hinder the operation of the left side but rather gives extra juice to keep afloat whenever closed. I still haven't test that though so I'm not completely certain this is how it works but without a doubt, bridging the pads would do it. Cheers! :)
Thank you so much, I’ve been looking for years for a controller that could fit around a big iPad. Thank you !!
Glad I could help! :)
I'm about to buy it. You got me on your first review about the G8+ cannot be modded.😅
I got got myself, GameSir threw a massive curveball with that one. Thanks bud, it's a GREAT product!
How did you extend the controller beyond the length for the big screen monitor?
4:47
thank u for trying it on for the legion go, i was planning to buy the g8 plus to test it out, lucky my answers are all here. thanks, man
Glad to have been of assistance, cheers!
I just got mine and I think i got a lemon :( After expanding it, no longer retracts all the way. A piece of it on the left stays popped out.
I didn't dismantle it but I took a look inside with my phone's light. It seemed like one of the bottom two springs was connected in a weird place. One of them criss crossed over the other. Not sure if that was the issue.
Amazon, at least in this case, is sending a new one.
Glad to know you had a solution that is hassle and trouble-free. It's a fine product so I hope you get to indulge in all it's glory sooner rather than later!
Thanks for this, this is exactly what I needed to know to get a premium controller on my tablet, since my BPD is reeeeally at its limits on 11 inches
Glad to have been of help! 🫡
Omg i was going to swap my s9+ for a s9 and then I see this and Pop N Lock!!!
Seems like you had a lucky star looking out for you and your wallet. Cheers!
Thank you for this! I was worried about whether I’d need to break it or not to fit my iPad
With pleasure!
I was just about to order the mod kit too..Thx bro..
Glad to know I was able to help!
yes, I agree this is great but two good reasons for having the g8 is the sound card and the phone charger
Yup! Can't deny that for sure. Such a great time for telescopic controllers!
I'm glad you posted this, I went out and got the Galileo G8+ for my Onexplayer X1 AMD like in you video.. however I think you missed that the Gamesir completely blocks the air intake on the X1. 79c w and climbing out of control when gaming vs under 60c. I'm posting up a mod to reddit now that solvew this but it does require drilling out the Ganesir G8 rear.
I just slide it up or down based on the device, for example, the Minisforum V3 has the vents at the top. With that said, link your mod when you post it, would love to see what you engineered, cheers!
Do you think it would be hard to find a way to fit a phone peltier cooler in the middle of the G8 Plus? But I am using a Fold 5, which would be able to use a cooler with the G8+ anyway.
It would be yes. That said, by pushing the coils aside, it could be feasible. I could imagine a talented 3d printer designer to make something for that exact motive, that said, as you pointed, the compatibility for various devices would be complicated.
Can you do the pop and lock on the previous G8? Thanks
You can but it's a little more tedious, watch a video by RetroBreeze on RUclips, he shows the exact process to get it done.
Great video can you tell me if we have the vibrations with the ps remote play on the ps5 games thank you very much
There are no vibrations with the official PS Remote Play app, that is not due to the controller however, it is because the software does not support that feature. To fix that issue, you should remote with an app called PS Play. That one offers extra and better features, one of them being vibration support. Cheers!
@@GameTechTalk
Thank you so I'm waiting to receive the controller and I also ordered the S9 tablet I'm going to enjoy it I'm going to sell my PS portal no longer needed and it's all thanks to you thank you again
I'll come back to you I received the controller it's great with an S9 tablet except that I don't have the vibrations when I play Xbox game pass or on GeForce now you know what to do thank you
@@alexous5237 For Xbox Game Pass, Google something called BetterXcloud. As for GeForce Now, I have no clue and completely unaware as to if the app even supports rumble at all.
Got this controller for my fold z 6 because of the Bluetooth. But now going to use it on my ipad. Thanks for the info
🫡 Enjoy!
Does it work on the onexplayer x1 on warzone? Im sure it works with everything else on pc
It does yes though I must admit, I don't feel as comfortable sticking such an expensive device in the G8+ but that's not to say I haven't done it, I've done it quite a lot actually.
So you were pretty excited to try this controller on your Minisforum V3, which leads me to my question. Has your opinion on the V3 changed? Kinda seems like you didn't like it that much in your earlier videos.
I wouldn't say all that much. Not liking it is a bit more than how I feel about it. It's not a bad device, it's just a very "specifically for" type of device and I think after having tested it thoroughly that I simply am not the target user. But it's not bad, it's actually quite good, but it also is overhyped in many of the areas that were the most important for me personally, which is gaming.
@@GameTechTalk Thanks for the reply! Well, I decided to go a little crazy and I've ordered a V3 along with the G8+. The G8+ has already arrived. I still like the Kishi Ultra more, but the G8+ can stretch to the V3's size. The "specifics" of owning a device like this I think are for me...I need a backup PC for my graphics work on the road and it can do gaming. This seems more convenient and portable than a laptop and I don't have to rely on finding a bigger screen. Hope this goes well.
@@JB-tp6uj Indeed, I think you'll find much to like with it!
Hey man, do you know at all if the pop out and pop in is possible on the original g8? Or do you have to go for the full mod?
The original G8 does require a bit more effort to get it to crack open whereas the G8+ has a small opening "tab" so it is literally built in the design.
Last question...regarding psplay app , it has inside its settings an option for vibration that when you touch it you can select "rumble " , in this way, the D9 bsp gamepad bluetooth rumbles. However what about the g8 plus ? The fact that it has haptic rumble could have rumble function working directly..., could you check it? If it does not rumble inside settings psplay app you go to vibration, touch it , and choose an option...there Must be haptic rumble ,rumble etc..
Could you try it please ?
Hey Andrew! I have used the G8Plus many times with PS Play and yes, the rumble works perfectly fine. In PS Play, you have two ways to get rumble, you can redirect it to the haptic motor of your phone, or to the controller, if the controller you use has rumble motors of course.
Seeing as G8Plus does, it works but you have to make sure to be on the PS Mode, the Switch mode won't rumble.
@@GameTechTalk oook thanks. To make G8 rumble itself (being in PS Mode) did you set up or enable one option in psplay app?? (Or maybe due to g8 plus has haptic rumble the gamepad rumbles directly) because with the D9 bsp controller, I had to go in psplay settings, look for haptic rumble and select rumble also. Could you how did you do it with G8 plus? Thanks man so much for your invaluable support
@@Andrew-Night I had to yes, I’m not home to check at the moment the name of the setting itself but there are two, one directs rumble to your phone, the other to your controller, you select the one for the controller for rumble to work on the G8Plus. It might also be activated by default, I can’t tell as I’ve been using this software for well over a year.
How comfortable is it? Can you walk around with it or does it feel to heavy?
I wouldn't walk around for two hours with my arms upright but I can definitely hold an entire COD M match, if not two and rest with my arms on an armrest after the fact.
Saw this demonstrated on Facebook for the G8. Was wondering why no RUclipsrs were talking about it and were disassembling the device instead. I also did this on the X2. Now the only problem is not damaging the coils. I stretched my X2 out beyond repair by torture testing it. Yeah, don't do that 😅.
The X2s-es don’t have as much coil wire and much like you said, it will inevitably keep a “stretch” if used on tablets. However, both my G8 and G8+ haven’t had that situation occur. It seems like they can better withstand the “beating”.
@GameTechTalk Got it! Feeling more confident to try it now.
Does connecting to a larger tablet such as the S8+/ Ultra cause any permanent streching of the springs?
My G8 has a coil that is slightly stretched but I don't think it's from the stretching itself but rather from me dropping it while it was opened (yeah I did that) and the springs got pretty tangled. But otherwise, my regular G8 stayed on a tablet for nearly 3 months consecutive so as far as I am concerned, this controller can definitely take the long term "stretch" exposure.
Do you have to mod it to use the pop n lock or does it come straight out of the box? And is there any delays with the Bluetooth?
It’s stretchable straight out of the box, no further mod needed.
I bought the one that comes with the extender, but...
How do you change it back from tablet size to regular phone size?
Do you have to break it down again, taking screws and cables out just to change the length to fit a regular phone again?
Hmmm, I'm not sure what you are referring to "the extender" but assuming that it is a 3D printed piece of plastic to keep it opened, I would assume that all you have to do is to remove that piece and it'll close back together easily. Could you tell me where you acquired that "extender"? Tell me the place, also, I think RUclips blocks links, hence why letting me know will probably be good enough and I'll google it. Cheers!
@GameTechTalk • I had to disassemble the entire controller to see if I could make it smaller to fit my ZFOLD6. 🤦
I send it back to get the regular one you have. 🤣
@@J.D.Vision Oh dang ahahahh! Yeah that can be a problem. Where did you get the extender though hehe, I might get one if possible!
@GameTechTalk • They sell the regular Galileo G8 PLUS for $79 and the Galileo G8 PLUS with expansion kit already installed for tablets $120 on Amazon.
(But I already had the old Galileo G8 one, moded for my tablet anyway)
@@J.D.Vision Ahh didn’t know that was a thing. Thanks!
I'm thinking of buy a rog z13 (2023) with an nvidia rtx 4050, and using this controller. How do you think it can work? The weight vs the minisforum v3 is 1.18 kg for the z13 and 946g for the minisforum tablet. I understand that due to the weight and size it's not going to be as comfortable as a legion go or a rog ally, but I want to know if your experience using this to play with the minisforum v3 was satisfactory, if it's really useful for playing, if the controller holds the tablet well
I mean, fortune favors the bold as they say and I think boldness would effectively be necessary to give this a try. Technically, this will work, the one thing that makes me hesitate is I don't know how rounded the corners are on the back of the Z13. I couldn't do it with the Legion Go for example because the corners at the back of the device were too angled. I've actually game quite a couple of times with the iPad Pro 13 and the Minisforum V3 using this setup, it's more pleasant on the iPad Pro but it's definitely feasible with the V3.
I just subscribed! Great info!
Thanks for seeing value in the content and channel! Cheers :)
Is the size of the Gamesir 8+ suitable for the iPad Pro M1 11'?
It is after the very easy and very simple modding.
This guy did it with the X2S as well not really a new feature or easter egg lol just a design flaw that can be used to do what you just did good on them for creating a Bluetooth controller like this form factor though, however does it play COD Mobile natively? I watched your review about it but forgot to ask that.
Hey waddap mah dude! I hope everything is good on your end. So I tested it for you, it does work just fine, CODM that is, CODWarzone as well. My understanding is, CODM will work with properly spoofed wireless controllers, any one of them. It's the wired ones that have issues and somehow only work with Backbone. Now, as long as you don't ask me if I did good with the controller, I think that is the question duly answered! 😅
@GameTechTalk hey 👋 everything good over yonder! Yes CODM is one of the big ones I test right away myself because I know some Bluetooth drivers don't support the Xbox controller (Xinput) mode. Gamesir Aileron which is an awesome controller sadly wouldn't play this, it's not the end of the world though because it's the only game I know of that requires the Xbox driver lol. Also I'm hitting you up with an email soon 😁
Hey GameTechTalk, I've been scouring everywhere just to check if it even fits a 14incher. Like let's say a convertable laptop? very curious.
In terms of width, it will. The hesitation to say outright yes is more dependant on the thickness. If the USB-C connector on the laptop is too high, you might lack the depth for the connection to be achievable.
@@GameTechTalk 😍 I just ordered one. Let you know how it goes.
i seem to find that popping it inward is easier do u think it will damage the controller or smthn?
I agree, my technique has greatly improved since ahahah! I've been stretching it many times and so far so very good, I wouldn't worry personally.
Thanks for the updated review my man! Man I'm tempted but my only gripe with all the mobile controllers on the market is that all the controllers seems to follow the xbox form factor even Backbone (which has license with PlayStation btw). Wish there is a controller which has PlayStation's form factor instead (both analog stick being low) as I prefer my hand placements to be that way 🥲.
Right, symmetrical stick placements. You are right, there is extremely slim pickings of those in the telescopic controller space. I do wish we would see more of them, thankfully that market space is greatly picking up pace. I'd be here for it too, I like both at this point.
Kinda wish they kept the USB-C functionality whilst adding bluetooth rather than taking one out to put the other in. Nothing quite like a direct connection for latency. Plus bluetooth (no matter how good) is always going to have noticeable lag for gaming.
I think they have something brewing but I don’t expect anything from them before late 2024 or even early 2025.
I never need the Mod. I will not a TV hold in my Hands 🤣
Don't knock it 'til you try it... Though it might knock you back and I am not responsable if it does! 🤣
So do I understand correctly: you dont have to actually mod the new g8+ it for it to extend?
Exactly yes, it's just a small pressure applied and done. It's child's play!
Love it mate, you‘re the only one who showcased this online. Already ordered it and I’m really excited🔥
So you're saying if I get this for my son he can use it with his iPad?
That is correct!
Amazing video! Thank you fro trying it out with the Win Mini 🙏
Which mobile controller would you say works best for the GPD Win Mini since this one doesn't fit as well?
Ouf that's a tough one, in terms of a telescopic one, really other than "mod 3d printing" a plastic lip to be able to install say the X2s BT or G8+, I don't see what else. The Scuf isn't able to receive this thick, same goes with the other two I listed, so it'll only be feasible with some extra efforts.
Hey, great video! Thanks
Do u know what 2.4Ghz dongle works with G8 + ?
I noticed that from the manual too but unfortunately, I have zero clue as to if/how a dongle can be acquired and if so, which one that it is. Sorry
Thanks for the info! 👍 keep rockin 🤟
Hi ordered it from amazon for my minis v3, but i ask if exist adapter on pla 3d printer for have major stability on tablet 14 inch
I don’t have a 3D printer so I wouldn’t know a thing about that but I would say that it’ll be necessary for “safe use”.
@@GameTechTalk i'm italian but very funny and good youtubers, this video is great notice
@@Checcoraggiolive Well hello from Canada! And thanks for being here, it is greatly appreciated! :)
Does it work on the ipad pro 13" 2024 and do you think it'll cause issues for the controller in the future?
It definitely does and no, I don't believe it would. The springs on that controller are extremely robust!
Has anybody got this to work on the PC via Bluetooth. Can't seem to connect mine properly using any of the 4 mods
PS Mode (Capture + B) and Switch Mode (Capture + Y if I recall) should both work without issue on PC. The hidden Xbox mode won’t, neither will be the G-Touch mode.
@GameTechTalk thanks. I'll try them out again. I noticed that they do connect however the button inputs are different. When I press a specific face button in any of the modes, they either register incorrectly or not at all. Thus my question
@@AlfaM03 Ahhh yeah, that’s because the Nintendo Layout (BAYX) is different (ABXY), however, you can flip it in mere second with a shortcut or with the app. Sorry I don’t remember the shortcut but its something like Hold GameSir button and A for like 3 seconds and it flips. Cheers
@@GameTechTalk True. That could be the case. Thanks man! I appreciate your prompt replies. Will try this out! Great vid! :)
Amazing! I got this controller because of this video. I can't believe there isn't a gamepad made to fit large tablets already. I'm probably going to trade in my tab s9+ for a tab s10 ultra when it comes out supposedly in October because of this mod. I hope Gamesir reads the writing on the wall and makes a gamepad that fits the tab ultras without mods.
Do you keep the pieces separated when not using the gamepad? It seems a little weak to store it like this, but I'm scared to keep doing this mod and possibly cause damage over time.
The springs in the back holds the controller together in one piece, they never come separated per say and to put things in perspective, the G8 (this controller's predecessor) is basically the same body and inner workings for the mod and that controller stayed for, no exaggeration, 4-5 months steady on my Tab S8 Ultra. Since then, I removed it of course but it still works just fine, it didn't suffer any particular damage or anything like that.
They are built very robust and from where I stand, you can feel at ease to put this on your tablet without issue. If you want to push it a smidge further, people even mod inserts to put over the coils so that the controller is permanently stretched. However for this controller, it may cause to lose battery autonomy as it needs to be closed for both batteries (one on each grip) to fully charge.
Nice one. I thought left and right part have some cable.
Samesies, they are so clever in their designs it's baffling!
@@GameTechTalk i put my comment before I saw you found those pins inside)
Lol I was watching the older video and commented its modable with flex only to realize u figured it out this one without needing flex cable. Yes nobody should be supporting or buying usb c gamepads they only restrict us from using it on tablets there is no visible effect on bl5+ devices.
Indeed, performance in peak conditions is shockingly good.
Does the G8+ fit the S8 Ultra a bit better (meaning it sits flush and evenly)? I have the G8 but i love the all black color and if it would fit flush on the device I'd sell my G8 for the plus!
It does and while there are devices I wouldn't necessarily recommend with the G8+ because they are too thick, for example the Legion Go or Minisforum V3, I definitly have been having a flawless experience with the iPad Pro 2024 13" and the Tab S8 Ultra. The coil system does a bang up job at keeping a very tight hold on these thin tablets, even when I have the back cover on by the way. It's pretty awesome!
Actually got my G8+ in and it's been awesome, I was curious if you know if Gamesir has any immediate plans to sell different magnetic styled buttons (a SNES one would be a dream come true!) or magnetic front plates in the style of retro consoles?
@@NumairRana Unfortunately, I can’t say I do, I wish they did, like even blank ones that you can paint on, I’d love to make myself a custom set.
The only thing that would improve it for me is if the joysticks were more in the playstation style orientation, they have an older controller, i want to say the t3 maybe? It would be perfect to base it on. I have the regular g8 and i like it alot, i just prefer playstation style for positioning the sticks
Yup, a lot of people prefer the symmetrical style, that's definitely the one thing I wish more companies would offer options for.
I already bought from previous video
This video just stamped it🎉🎉
I don't get this excited often about hardware but GameSir literally had me jump up and down like a kid on Christmas. To think this got past me made it that much more fun to discover! (tks to Retro Tech Dad)
Does it fit the OneXPlayer X1? Dont the springs carry current? A 3D Printed cover would be solid!
Nope, the coils carry data and seemingly, this does not seem to be interfered by with human contact. I wouldn't know about metal or liquid but human? Good to go. As for a 3D printed cover, they already exist for the G8, heck they can even be bought on Amazon. So it's really a question of time for G8+ specifics if it doesn't already fit with the G8 ones. Oh and yes, it does fit the X1 just fine! Absolutely crazy stuff. GameSir need to be making a PC app.
@@GameTechTalk Solid! Thanks!
how far does it extend? because i have a 14.1 wide oled portable monitor and im wondering if it`ll fit.
It will. The Tab S8/S9 ultra is slightly bigger and it works. This thing is a beast I tell ya!
@@GameTechTalk thank you for your excitement and your reply. Subscribed!
Awesome , you are BREATHTAKING!! THANKS
However, there is something I am missing ... XINPUT...(Xbox Controller Mode)
Two questions please :
1 does the G8 plus Rumble when you use BetterXcloud on android ?? (Wireless /bluetooth) Or just wired? Perhaps using the Dual shock wireless Mode makes BetterXcloud rumbles...it is worth trying this also.
2 ok Windows, Does the G8 plus Rumble using Xcloud or Xbox installed games? If so, which Mode do you use ??
I really Hope Gamesir includes the Xbox Mode bluetooth soon
Pleasure is mine, ok so before I even got into a game using BetterXCloud, it showed an icon of the controller with a checkbox with Vibration, indicating it was supported. I tested with Forza and lo and behold, the moment I hit the gaz, RUMBLE!! 😊
I tested on the PS4 mode, fully supported, fully functional (Switch mode you would've lost the analog triggers). As for PC, that's where things get a little more complicated. If you plug in using cable, and you hold Capture + X, as I addressed in my review, it will effectively switch to X-Input, no need to wait for a firmware update, it does it now.
However, if using wireless, you can still seek connection on X-Input mode but other devices do not seem to see it when scanning, maybe they left the SSID invisible to prevent access? I can't say for sure. So you have another solution, if you connect wirelessly on PS Mode and you use a software called ViGem on PC, you can convert any controller to Playstation protocol, or X-Input protocol, and vice versa. So the solution then becomes to connect using the PS Mode and with ViGem, change your controller protocol to X-Input and voila, this will work without issue with Xcloud or any other else games that would require it like Gamepass titles.
There may not be a wireless X-Input support officially from GameSir, and again, I would be 100% sure that the reason is Microsoft licensing, hinting a potential Galileo G8 for Xbox model in the future but if there is, much like the X2 Pro, that model will most likely have less features in terms of modes, but it could have both triggers and grip rumble, that would be cool!
Anyway, I'm getting sidetracked here, I hope this helps!
@@GameTechTalk thanks again , so focusing just on android /BetterXcloud
You said that the Xbox controller was checkout with vibration and It Rumbled, but, how did you Connect the G8 plus to BetterXcloud?? Wired ? Or Rumble can work wirelessly?? If so, what bluetooth Mode have you used?
If you enable dual shock 4 Mode wireless, does the Rumble work on betterXcloud on android ?
My main goal is making the G8 plus Rumble working and the Gamepad connected wirelessly when playing BetterXcloud.
@@Andrew-Night On BetterXCloud, I tested wirelessly using the PS Mode and yes rumble worked perfectly fine.
For PC, it works wirelessly as well but if you absolutely need X-Input, you'll have to use ViGem for the time being. Cheers!
@@GameTechTalk oh..GREAT!!! So you mean...you enabled the DualShock Mode (wireless/blue color led) and when using BetterXcloud app on android, the app recognized the G8 plus as a Xbox Controller (pop Up message) with vibration checkout, right???? (Rumble fully working )
Could you confirm me this last time please ?
(A video explaining showing and clarifying how to make this G8+ rumbling with BetterXcloud would be very helpfull)
Holly Molly, It is awesome. Very good news
I am imagining the G8 plus rumbling on a S10 Tabs Ultra ...(Using BetterXcloud)
This Gamepad G8 plus is a dream come through
Yes but no, the app recognized the controller as a PlayStation, it even called it as such, but the app converts it so that it works with Xcloud so you are right in a sense but really, it's the app that is doing the heavy lifting. Exactly like that ViGem I told you about, BetterXCloud basically does the exact same thing. Just know that it works, everything does, including rumble and analog triggers. Cheers! :)
show a complete disassembly of the bottom gamepad
I plan to at least make another video on the G8+ so I might take that into consideration. Cheers!
Can u do video showing how to connect to pc and will it works with games
Because i had nacon mg x pro it connect to pc but not work with games
In games not recognized .......?
Quite frankly, I love this controller so much that I might do a game showcase, if I do? I'll include a connection guide but it shouldn't have the problem of Nacon since it can be spoofed as many different controllers. Cheers! :)
@@GameTechTalk thank u for responding
I like your channel
Good luck to u
From the moment I did it, the g8+ didn't close properly for me until the end.. Is there a way to fix it?
I am under the belief that GameSir does not consider that as a defect but you may want to reach out to be certain. With that said, I have had countless people tell me that this had zero impact on their coil system, except for the X2s (wired and BT) but for G8 and G8+ (as well as Abxylute S9) so far, it hasn't been a problem for me and these controllers are full-time on a tablet in my case.
@@GameTechTalk
It's weird because I've only done it a few times and apparently the springs are already ruined or something
@@Liranpe94 You could put a velcro to keep it shut completely and when you want to go tablet mode, undo the velcro. Plus, it'll give you a nice felt backing to protect your phone/tablet. Worth trying I think!
@@GameTechTalk
I'm debating whether to send it back to them for a refund
should i get this over bsp d8 pro for my 11inch tablet?
since bsp d8 pro cost half of the price, and doesn't require any modding at all
also if we do mod g8+ permanently, only 1 battery will work and that is not cool
The D8 Pro will work for an 11in tablet. I would still recommend confirming width of your specific tablet to be safe but I am certain it'll work. As for G8+, indeed, modding it permanently will basically render the ability to charge the other battery impossible. At least not without some other pretty serious modding that would require to re-route charging cables.
@@GameTechTalk hey what about memo s3, is it any good for 250.5 width tablet?or maybe i should just get the handheld like powkiddy x55 or rg556
i only want moonlight streaming (nvidia gpu)
the telescopic controller seems to have too much problem for 11 inch tabs
g8+ : half battery due to mod
bsp d8 pro : quality issues???
memo s3: no battery also i prefer BT over type c
also thanks for replying and helping us out in comments
Have you tried any aftermarket thumbsticks?
Not on this one no. I did on the G8, some eXtremeRate ones but for the most part, most things should work without issue.
@GameTechTalk for xbox s and x, right?
I bought some that didn't fit, but later read they were for Playstation.
@@J.D.Vision Not necessarily, basically you have to grab the full cap with the skirt, that should be extremely compatible. I have a bunch of them that I would buy to mod 360 and PS3 controllers, they still work as it's the same format, but lately, we're starting to see some different ones so yeah, compatibility may be a hit and a miss.
@@GameTechTalk • cool 😎 I will try that!
So my bad im new to these controller but i can't figure out how to connect to windows tablet
Put the desired mode (Capture button + B for PS Mode for example), hold the small round button next to the USB-C to enter pairing mode, grab the bluetooth signal from your Windows Tablet. That ought to get you situated. Cheers! :)
Yeah but this is been done with the other models im surprised people are just now finding out , I've done this with the Redmagic version paired with a y700 tablet
The difference with this one is that people did not expect it to be possible due to the fact that there are a battery on each grip, it was assumed (at least by me) that the connector daisy-chaining both batteries would prevent the mod from easily being done but as it turns out, it is feasible without issue because they thought of that. I must commend GameSir on thinking ahead and giving such awesome easter eggs to buyers of their products!
@@GameTechTalk Gotcha, I have the Plus model coming in tomorrow but man does that kishi ultra look great to be paired with something like the razer Edge, but the price is like a PlayStation Portal 😫
@@JAYJAY1787 Yup, Razer is on a mission to throw consumers into a recession. Joke aside, it's a good controller but it's also crazy to think that you can buy an Abxylute S9 and a G8Plus for the price of one Razer Kishi Ultra, and both controllers are superior to it... I'd love to be able to laugh at that but it's getting very concerning.
@@GameTechTalk Just wished they had RGB for night time gaming
@@GameTechTalk Dude got my controller yesterday, they definitely did there thing on this absolutely Amazon! I'm definitely going to get a grip for it as it's a bit slippery but other then that it's a must have!!!
Does this stretch out the springs and cause the controller to stop retracting?
That would be the X2s and X2s Bluetooth in my experience, the GameSir G8 and G8 Plus have held up amazingly well.
someone's gonna be crazy enough to put a 4k tv on this controller 😆😆
😂😂😂
Hello does this work well with the OneXplayer X1 Mini?
It does work. “Well” is subjective. I wouldn’t trust something as heavy on a G8+ when laying on my back but it definitely has a good enough hold on the X1 Mini to actually play with that controller.
@@GameTechTalk Thank you very much for the response. Love the channel.
Dont know if you have one but can u see if this fits the legion go
How hilarious as I was literally typing that the video got to that part lol
😉 I would’ve been happy to test it if I hadn’t but yeah, I’ve retested again since and I’d stick to the same which is that those angled corners either make the G8+ too likely to slip out, or to have a 3D printed piece to provide a superior hold on the Go. Cheers!
What is the bluetooth latency like?
Extremely good, especially on the Switch mode for some reason. Less jitter, better stability = theoretical better latency.w
are you doing it with an ipad 13" pro or 11"? lookin to get for a 13in if it works
With a 13in and it works quite well!
Does this support rumble through Moonlight on PC?
It does, fully tested!
I have a question have you heard of the shadow blade 2 controller?
I have, that was a subsequent model that GameSir licensed and produced for RedMagic approximately 3 months after having launched the Galileo G8. They launched it with the RedMagic 9 Pro if I recall? It's exactly the same as the Galileo G8 minus the color difference, but branded with RedMagic stuff on it. Basically a repackaging, rebranding, recoloring. Were you looking to buy the Shadow Blade 2?
@@GameTechTalk Yeah I was thinking about buying it because I hate the color of the g8 galileo and I like the colors of the g8 plus but I don't like it bluetooth only
@@The_Supreme_Savage Ahh then you should get exactly what you're looking for. How I wish they would just sell faceplates and buttons though! I almost bought a Shadow Blade 2 just because it honestly still has the best color scheme to this day.
@@GameTechTalk Yeah they should definitely sell different color face plates and buttons
So I just got mine, I connected to my Google pixel 7 pro through Bluetooth but when I try to play cod mobile it don't activate IG, do I have to screen map? When I tried that through the app it wouldn't work
EDIT, i fugured out the screen mapping but idk how to get the screen mapping to be playable. Very strange. I have a Google Pixel 7 pro so it's definitely not my phone. I had all the buttons mapped where i wanted them but i didn't know what to do from there, do i stay connected to gamsir mapping or what
No, you should be fine playing CODMobile as long as you use bluetooth, but some modes may not be compatible, try connecting with the blue light (Capture Button + B) to your phone, that ought to do it. No mapping should be needed.
@@GameTechTalk it worked! Thanks man. Android mode wasn't it for me😂
At this point they should just officially have a release button(s).😅
I don't know about that, they design so well, I'm tempted to ask for a cup holder or something! 😂
can the G8+ fit the Ipad Mini 6 without modding?
It can, it supports up to 217mm (without being modded). Cheers!
Dream Gamepad for tablet users😁
Totally!
Can this be done with the abxylute?
The mod yes, but you do have a USB-C poking into your device so if you mean bluetooth, it'll be a bit of a tough sell.
Your prev video that its not moddable made me waste 2 days searching for 8 inch tablet and loss of 2k inr for getting a loan to get this 8 inch tablet. Thanks for atleast making this video and correcting. Now I can use my 10 inch tablet I have with it.
I am terribly sorry, I assure you, if I had any idea, I would've addressed it in the original review. With that said, I'll make sure to further expand my "physical" testing in the future to prevent situations such as this one. Thank you for your support and understanding.
@@GameTechTalk you are enthusiastic that itself is wonderful, keep your enthusiasm and keep making videos, don't worry about mistakes
Phew glad I kept watching more videos, I almost did the same thing lol
so i dont need the expansion kit from rrtronics?
The Expansion kit most certainly makes it a clean experience but indeed, you can do without if preferred.
if you need to charge it, plus bluetooth latency/hassle, and increased weight, that's the reasons you might prefer g8 over g9+
Latency has been superior on the G8+ versus the G8, crazy I know and the one reason is due to polling rate. Granted, there is a bit of jitter but in optimal settings, you're still 4x the latency on the G8, 8ms versus 2ms average. Of course, -if- the G8 polled as high as the G8+, I wouldn't be saying that but... it doesn't so that's a win for the G8+. For everything else you named though, you are right. Personally, I lean more on the benefits the G8+ has that G8 don't, like USB-C (female) wired support, Switch support, rumble, swappable buttons, gyro enabled, and outright better internal performances. Better compatibility with cases too. I hear you but to me it's trading a bit of convenience for a truckload of features, a fair trade in my personal opinion.
People talking Bluetooth latency, what piece of crap hardware are you connecting controllers to ? You don't hear anybody on the Xbox one/series or Playstation 3,4,5 people complain about their wireless controllers right ? Get off the fact that "bluetooth equals latency/hassle" - it's not. The G+ also has rumble and gyro , you can use it on the switch instead of docked joycons for more comfort without losing gyro aim.
@@GameTechTalk Everything about this controller is so awesome down to the smallest details like the polling rate and the auto on and pairing when extending the device. Which is why I am so sad that I have to return it, I get painful hand cramps after several minutes of playing which I think is from a combination of the heavy weight and my pinky finger not having a good grip on the handle. Other smaller controllers without a place to rest pinky and ring fingers don’t give me those cramps probably because they are so light. I also prefer a mushy retro d-pad with symmetrical sticks like the sn30pro and +. I’ll just be here narcos waiting meme until 8bitdo makes a telescopic controller.
@@Anthony-zl9ow Aww man! I can understand, I had my own occasions of having a product that has all the makings of something I want, but unfortunately just doesn't work for me. Sorry to hear but glad you at least got to experience it firsthand to give yourself a fully formed opinion.
As for the 8BitDo Telescopic meme, they have got to see the market growing, hopefully in due time, they'll dare to tackle it. If ASUS, Razer, Scuf, to name a few, can see the potential, 8BitDo ought to realize they have a loyal following and that A LOT of people would jump on a product if they did put one out. So consider me part of the movement! 🤣
Now I think this is your top 1 controller...hahaha updated list for iOS separate to android controller ❤️
It definitely caught me off guard, and that greatly pushes it to pole position yes. It's soooo fun to find easter egg on hardware! It's a very rare occurence and GameSir nailed it by not mentioning that feature at all!
I have17 inch portable monitor, should i do it ? :)
Surely you must be joking right now... 107" OR RIOT!!! 😈
BUY IT NOW!!!. Thanks broooooo
My pleasure!
🔥 controller, 🔥 video
Thank you for your support! ❤
You can’t do that with the regular g8?
Sure you can, however I originally thought G8+ wasn't going to be able to do that because it runs a specific cable to daisy-chain the batteries. Of course, GameSir had a plan to address that and retain the easter egg from G8.
From France, i’ve seen your video a lot of Time, it’s creazy !!😮, I ordered one,
( 😂😂amazing!! You make my english beter)!
In my opinion you’re SO RIGHT to be Like that 🔥🔥🔥
C’est la folie !!!
Wait g8+ for my s tab 9plus .
On est al!!!!!
🙏🫨💪🤝
Ahh franchement, ca fait grave plaisir! Merci beaucoup et content de t'aider avec l'anglais en plus!
@@GameTechTalkyo bro,
Tu es sûr que le controler fonctionne toujours après le casser? C est pour ma Samsung tab s9+, j’attend la manette,
Je pense qu’il y a un câble d’alimentation qui est rompu quand tu fais ça…
@@sofianeworonka9964 Le cable d'alimentation dont tu parles n'est pas "rompu" la connection n'est tout simplement pas effectue lorsque la manette est ouverte, partiellement ou completement. Ce sont des "pogo pins" qui servent a charger la batterie de gauche car sinon par defaut, la batterie de droite est "maitre". Tu peux enlargir la manette sans aucun risque.
next try a TV!!
Not before trying with a projector and a wall. 106" baby, let's gooooooo!!! 😂
Dang i got the the g8 , oh well 🙌
Not too far off, still a great product and some people will prefer never having to recharge the G8+.
Anybody found a way to make vibration work on GFN android?
Haven't tested out GFN on my end, sorry I can't help.
Does it fit the lenovo y700 2023?
It absolutely does, without modding that is. Modding it will just expand further!
Does gamsir still have the horrible software that makes you bypass all the security features to install it??
If you mean the software on its own, no, you just grab it from the PlayStore. If you mean the screen mapping software? Yes. That's not specific to GameSir though, other mapping softwares have you do the same, it's even more complicated on some of them.
help i cant connect my ipad mini 6
Try connecting while on the PS mode, hold capture + right side face button for a few seconds, the light will turn blue and only then should you pair it. Cheers!
You already test the Razer Kishi Ultra?
I have yes. This takes the crown, easy.
@@GameTechTalk the Crown for the G8+ or the Kishi Ultra ?
Kishi ultra also possible to mod for bigger Tablet ? :)
@@Krrr90 For the G8+, the Kishi Ultra is good, don't get me wrong, it definitely is. But there is just simply ZERO reason to go Ultra with the G8+ in existence. It has rumble, it has gyro, it can be easily modded for larger tablet support, it's got better polling rate too. You know the only thing the Ultra got over the G8+? RGB. That's it. Only thing.
Not even joking. If I was to flip, that list would simply be too long.
remote play ps5 (ios) gyro not work g8+
Indeed. The gyro only works if you connect the controller directly to your PS5 and that's only for PS4 games (since G8+ spoofs as Dualshock 4) and the connection breaks after about a minute. So gyro from the controller level is definitely working, for Remote Play, I think the issue is the software itself.
@@GameTechTalk thank you very much.❤️
So would this work for Samsung S9 Ultra?
Guaranteed that it does, I use it on my Tab S8 Ultra and they have exactly the same measurements.
@@GameTechTalk wow nice man, gonna snag one
Didn't he just said that he won't mod the g8+. HAHA.
I definitely did! THEY PLAYED ME. 😂 You gotta see it like I did, I see two batteries, I see a cable going right down the middle, in my mind, I was like: "Yeah that cable gets in the way, it can't be done". I wasn't expecting this AT ALL. I got duped!! 😂
Does it connect to forestick?
Firestick
Unfortunately I have no way of confirming that information but I did read somewhere that fire sticks apparently had issue with X-input. With that said the modes found on G8+ are Switch Pro controller and PS DualShock 4 mode, so if these two controllers work on the fire stick, so does the G8+.