thanks! this really helped me understand the positioning of where the tire should be when dismounting and mounting, everything was good about this demonstration except that your not supposed to leave your arm and hand over the tire while inflating it to seat the rim. if the tire is defective it can blow the side wall and cause personal injury.
So you can remove/swap TPMS without taking tire completely off rim? once bead is broken and tire compressed(@ 1:30 mark) it almost looks like there is room to remove TPMS
I'm real curious why you bother to take the valve stem out unless it's just a matter of habit. But generally speaking if especially when TPMS if the stem is good the court should be fine My issue about it is this you don't need to remove the cord to get the air out, yeah sure in a shop you do that cuz the air comes out a lot quicker I get it. But someone at home on their machine at home or even their mechanical from harbor freight following these safety directions for the location of the TPMS
How much could someone make working with these? Taking the tyres off the car, doing all this, putting the weights on and putting the tyres back on the car? How much would you get for a moth's work?
I did this, taking/putting the actual tyre on the car (Don't know if that's actually part of the gig), put weights on the tyres, fixed defective tyres, fixed the rims whenever it needed it, washed the wheels and so on. Got paid 90 bucks/week working 8:00-17:00 mon- fr, 8:00-12:00 sat. So 49h/week, every week.
Uummmm one can not "simply" change the battery from the sensor, the battery is part of the sensor and the while rite will need to be removed for this process
+Matt Roulston u must be one of the special kids that goes to tech school or something... because y would u need fucking ear and eye protection wen mounting a tire.. never. and who cares if his hands on it its not like hes filling it up with 80 pounds of air
+Smitty Jonson I don't even remember writing this lol. but I don't give a fuck where you are if your doing something that could potentially be dangerous in the workplace proper PPE should be worn. I hate people who think their badasses and won't wear protection cuz they think it's not needed or its annoying. I hope those people get hurt because I don't wanna be held responsible when I'm running a job and one of my guys gets injured due to lack of safety.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
the piece you take out is the valve CORE, the stem is what stays in the tire
thanks! this really helped me understand the positioning of where the tire should be when dismounting and mounting, everything was good about this demonstration except that your not supposed to leave your arm and hand over the tire while inflating it to seat the rim. if the tire is defective it can blow the side wall and cause personal injury.
I'll be doing the missis focus 1.5tdci I already popped one a while ago. This time I will NOT break one! Thanks
Excellent demonstration.You made it seem very simple. Thank you!
Excellent, very clear. Thank you so much.......all the way from London !
Thank you ... regardless of more safety ...Thank you ... that's how it's done ... from Montreal ...
Thank you. This one video answered all the questions I had about the tpms and tire swapping.
So you can remove/swap TPMS without taking tire completely off rim? once bead is broken and tire compressed(@ 1:30 mark) it almost looks like there is room to remove TPMS
You don't work at a busy shop I would get fired for doing all that
Hi, do you have a tutorial for replacing de TPS?? I have a Journey 2010, Thanks
Great video. Thank you.
Thank you so much! Very clear instructions man… much appreciated.
Remember when demonstrating this technique do not bang on the TPS monitor with your crowbar too hard, just a light tap.
Why don't the sensors have replaceable batteries? What a rip-off.
What about band type sensors?
The sensor should be placed at 5 o'clock compared to the arm of the machine.
No. Not unless you’re putting the tire on. Then it’s at 5.
Whats the song that's playing in the back ground.
I'm real curious why you bother to take the valve stem out unless it's just a matter of habit. But generally speaking if especially when TPMS if the stem is good the court should be fine
My issue about it is this you don't need to remove the cord to get the air out, yeah sure in a shop you do that cuz the air comes out a lot quicker I get it. But someone at home on their machine at home or even their mechanical from harbor freight following these safety directions for the location of the TPMS
great video!
how does the sensor communicate with the car?
bluetooth
@@iordachelucian3516 only cars I know of that use Bluetooth as stock right now is tesla. Others use 433mhz or 366mhz(US) radio signal
Thanks for the video, Bill
Good job! Thanks!
Thanks for the video. Don't mind the trolls on RUclips, they're always salty about something.
Our favorite comment yet ...
Good job.
How much could someone make working with these? Taking the tyres off the car, doing all this, putting the weights on and putting the tyres back on the car? How much would you get for a moth's work?
I do this plus oil changes and batteries and get paid $10 /hr xP
I did this, taking/putting the actual tyre on the car (Don't know if that's actually part of the gig), put weights on the tyres, fixed defective tyres, fixed the rims whenever it needed it, washed the wheels and so on.
Got paid 90 bucks/week working 8:00-17:00 mon- fr, 8:00-12:00 sat. So 49h/week, every week.
i get 500 a week
That must be nice...
Hell.
Eastern Europe.
It's not a bad idea to change the battery on the TPMsensor while the tire is off
Uummmm one can not "simply" change the battery from the sensor, the battery is part of the sensor and the while rite will need to be removed for this process
LoL this guy is a cowboy never hold the the bead breaker bar
no safety glasses, no hearing protection, has his hand on the tire when inflating..
this is how you get workplace injuries people..
+Matt Roulston u must be one of the special kids that goes to tech school or something... because y would u need fucking ear and eye protection wen mounting a tire.. never. and who cares if his hands on it its not like hes filling it up with 80 pounds of air
+Smitty Jonson I don't even remember writing this lol. but I don't give a fuck where you are if your doing something that could potentially be dangerous in the workplace proper PPE should be worn. I hate people who think their badasses and won't wear protection cuz they think it's not needed or its annoying. I hope those people get hurt because I don't wanna be held responsible when I'm running a job and one of my guys gets injured due to lack of safety.
no ill wear safety glasses wen im grinding or wleding something but a tire? thats ultimate pussy level 9000
+Smitty Jonson "ultimate pussy level 9000" greatest comment on youtube
im not taking anyones side but "rubber"is a good movie about a tire
If it was an alloy rim it would be the best way to scratch it. :)
how not to change a tire with tpms sensor!!!
hmm looks easy. Firestone wants to charge me 120 just to do 2 tires.
Getting all that crap on my rims....