I just want you to know that I appreciate your channel and your work so much, that i sit through all of the ads just so you will get some revenue.... because I am too broke to send you any funds or buy your merchandise.
All I know about hydraulics is when you refill hydraulic fluid you fill with the mast collapsed. Not expanded. Otherwise you will blow your seals. That's all I got. Wish ya luck on the pump issues
Adam, most simple dump body’s use the weight to bring the box down. You can tell this by only one line to the bottom of the cly and a release solenoid . You would engage the pump it fills the cly then the down button opens a hydraulic switch and the solenoid slides a valve open and the weight of the box pushes the hydraulic fluid back into the tank . Hope that helps
Can’t wait to see more on this truck, I watched your other series on the slam box as I’m getting ready to do something similar. I’m going today to grab a 2007 ford e450 6.0 powerstroke chassis to put my 1952 Pontiac chieftain on. I am so excited and can’t wait for the project to come
Iam starting to love the old-school truck trends 💪🏽 you sould install a LS engine in the new project or a modern engine and keep the truck original that would be epic but can't wait for more bro 😀 👍 #bodesqaud #projectthedumper
HECK YEAH! This is a once in a lifetime find man. These trucks are so hard to find and when you do no one wants to sell. My opinion is take your time and do this right, I know RUclips makes you want to turn out videos but I would love to see the details you go through I know there wont be a big bang at the end of every video but would love to learn how you did what you do and see this thing be the best it can be. You are a super talented body man, painter, fab and mechanic, go all out my man. Can’t wait to see what you do with this truck. Oh and perhaps you change the dumper into a flat bed, use the hydrolic system to bring the trailer low for all your slammed cars to make it up with ease.
I think these systems work with a release valve when it has to go down. So maybe that's stuck or not switched on by operating the system this way? Very nice new project Adam. Very stoked! Have a good one. Regards Nico.
LAST WEEK FOR THE SLAM BOX bodevision.bigcartel.com/product/key-tag-slambox-1968-ford-f350-custom-build-giveaway
I just want you to know that I appreciate your channel and your work so much, that i sit through all of the ads just so you will get some revenue.... because I am too broke to send you any funds or buy your merchandise.
@@BoilerRoomRadiome too! Its a shame this guy does not have tripple the subscribers! Awesome work !
As others stated, motor up, gravity down. There's probably a bleed valve in the cab. Love your builds, Brother! Way to go.
All I know about hydraulics is when you refill hydraulic fluid you fill with the mast collapsed. Not expanded. Otherwise you will blow your seals. That's all I got. Wish ya luck on the pump issues
That’s at least something. Thanks for that. The more info the better!
Adam, most simple dump body’s use the weight to bring the box down. You can tell this by only one line to the bottom of the cly and a release solenoid . You would engage the pump it fills the cly then the down button opens a hydraulic switch and the solenoid slides a valve open and the weight of the box pushes the hydraulic fluid back into the tank . Hope that helps
Yes thank you. I’ll poke around a bit more because it would be great to have it working 100%
Can’t wait to see more on this truck, I watched your other series on the slam box as I’m getting ready to do something similar. I’m going today to grab a 2007 ford e450 6.0 powerstroke chassis to put my 1952 Pontiac chieftain on. I am so excited and can’t wait for the project to come
great video again
Look for a release. Could be power up and gravity down....
I’ll look into that. Thanks
Iam starting to love the old-school truck trends 💪🏽 you sould install a LS engine in the new project or a modern engine and keep the truck original that would be epic but can't wait for more bro 😀 👍 #bodesqaud #projectthedumper
Wait, what did she call me? lmfao
Hook the negative to the body. That relay is grounded by the body. The lead from the relay to the motor is the power from the relay.
Tire guy had a hard time believing you did the whole slam box by yourself 😅 The new project is going to be dope.
Would be a pulling machine with a diesel in it!! It'll be sick no matter what, keep up the amazing work.
Thank you very much!
I love your skill set. You do amazing work
Print up the "Goodbye Diarrhea" shirts and buy the kiddo a little kart or something. 😄😊
Going to be another amazing build. Keep up the great work.
Good job! Nice purchase!
That was funny ....he couldn't believe a white guy made it himself 🤣🤣
I wish you’d paint it but you won’t cuz pateener
I get the heebie-jeebies when I see trucks like this gives me that Wrong Turn vibe
😎 cool truck
Lovin the dumper, it seems to be a great starting point!
Need hundys n white walls
HECK YEAH! This is a once in a lifetime find man. These trucks are so hard to find and when you do no one wants to sell. My opinion is take your time and do this right, I know RUclips makes you want to turn out videos but I would love to see the details you go through I know there wont be a big bang at the end of every video but would love to learn how you did what you do and see this thing be the best it can be. You are a super talented body man, painter, fab and mechanic, go all out my man. Can’t wait to see what you do with this truck. Oh and perhaps you change the dumper into a flat bed, use the hydrolic system to bring the trailer low for all your slammed cars to make it up with ease.
Thats a really good call! lets see how this ends up!
Heck yea brother!!!
🔥🔥🔥🤙🏻🤙🏻🤙🏻🤙🏻
Nice Dumper!
I dig it
This is going to be another good one!
👊👊👊
Beautiful Chevy or I should say GMC to me they’re all the same to me beautiful trucks tho.. you are blessed
I appreciate that
A c15 is a gmc half ton not 3/4 ton c25 is a 3/4 ton and c35 is a 1 ton
There’s so much info out there and I misunderstood what I read. You’re correct. Thanks
😊
It needs some Rallies it’s a GMC
What you know about Paul Wall
more carrots than Bugs Bunny’s lunch… come on
Your third truck in a short amount of time ... what is now going to be your own work truck? This one? I thought it would be the C10?
The black c10 is a buddies truck that ive been working on
The first truck would of been a great truck to use as a truck a well before swapping it to basically a car with no hauling or towing capabilities.
I think these systems work with a release valve when it has to go down. So maybe that's stuck or not switched on by operating the system this way? Very nice new project Adam. Very stoked! Have a good one. Regards Nico.
Excited for the C10 and the new Dumper is going to be sweet!
You have the neutral connected to the active, swap it over, put the active onto the motor…
I think it’s a neutral activated solenoid
Body swap it into a modern diesel truck
Have you tried to reverse the pos.& neg.
yes, it still went up, even in that fashion
Lookin forward to da new build
It's hard to believe that some car guys don't have a trailer to pick up projects
It’s all money priorities. It’s not just needing a trailer it’s needed a decent truck. I’m working my way up to it
Hear me out, *ramptruck* ! Why struggle with a trailer wher you can tow a car on the back?
That’s not a bad idea!
Better verify that the truck has enough capacity in the GVWR after curb weight to not be overloaded with a ramp bed & vehicle on back.
goodbye diarrhea 😂😂😂