How to install a Navien controller in a sheetrock wall

Поделиться
HTML-код
  • Опубликовано: 9 июн 2024
  • I get quite a few questions on controllers, and I figured let me show you how we install one in a sheetrock wall.
    Our installs are all about the fit and finish and we like to do 99% of them exactly the same. Surface boxes are all well and good but don't look clean. And if the customer wants to put or push back shelving the external box will be in the way. Like I said in the video sometimes you do need to install one of these boxes.
    All Navien NPN unites come with a controller and you will need to buy on if installing an external NPE unit.
    The box I use can be purchase at any local big box store or at a local electrical supply house.
    The box is called finished work box.
    The screws are 6/32 X 1" long.
    Navien controller#NR-10DU 30000609A
    The wire I use is 18-2 conductor
    Blue wire nuts
    As you can see its quite simple and very fast to install and will give your job a much cleaner look.
    If you have any questions, please E-Mail me at economyplmbg@aol.com
    Please take a look at our new Web site,
    www.economyplmbg.com
    Follow us on social media at,
    Facebook, economyplmbg
    Instagram, Economyplmbg
    TikTok, That tankless guy
    I hope you enjoy the video,
    Mike
    PLEASE HAVE A LICENSED PLUMBER TRAINED IN LEVEL THREE TRAINING AND TO FOLLOW OR STATE AND NATIONAL PLUMBING AND GAS CODES. PLEASE FILE A PERMIT AND OBTAIN AND INSPECTION FROM YOUR LOCAL BUILDING DEPARTMENT.
  • ХоббиХобби

Комментарии • 6

  • @yit555
    @yit555 Месяц назад

    Hi, I have a Rinnai R94LS that sounds like an air compressor running when in use. Very loud rumbling/vibrating/humming. It’s intermittent, shows no error codes, and has worked fine for six years. Removed and cleaned out the fan and did not help. What should I check next? Thanks

    • @ThatTanklessGuy
      @ThatTanklessGuy  29 дней назад +1

      There could be something in the Air box, vent pipe or the high low gas settings are off.

  • @judegonzales2231
    @judegonzales2231 Месяц назад +1

    I see people installing pex for condensation lines on the Navien . This is a big No .

    • @TheBuddylab
      @TheBuddylab Месяц назад

      I use CPVC ONLY WITH A PLASTIC FEMALE ADAPTOR

  • @judegonzales2231
    @judegonzales2231 Месяц назад +1

    Shark bite

    • @TheBuddylab
      @TheBuddylab Месяц назад

      Yes shark bite I’ve been using them since they came out and never had a problem with them.