TURN YOUR WORK SHARP INTO AN ELITE SYSTEM WITH THESE AFTERMARKET PARTS
HTML-код
- Опубликовано: 20 дек 2021
- WORK SHARP PRECISION GUIDED SHARPENER AFTERMARKET ATTACHMENTS
WORK SHARP PRECISION GUIDED SHARPENER SYSTEM
amzn.to/3J71J1b
AFTERMARKET ATTACHMENTS
www.etsy.com/shop/Practical3DP
ATOMA DIAMOND PLATES 1× 4"
amzn.to/3egpTIk
ATOMA DIAMOND 1×6"
amzn.to/3H2UaXD
VENEV RESIN DIAMOND STONES 1×6"
amzn.to/3GXLyRS
DIGITAL ANGLE FINDER
amzn.to/3ml1m9p
VENEV RESIN DIAMOND STONES 1×4"
amzn.to/3EcoM7a
6×1" KANGAROO STROP
amzn.to/3qinmmx
1×4" Strop
amzn.to/3pggFlI
1×5" Ceramic double sided stone
amzn.to/3eek26E
ALUMINUM OXIDE AND CONDITIONING STONE
amzn.to/3egCFa2
FATTENING STONE & conditioning stone
amzn.to/3ebP0fu
SAND PAPER PACK
amzn.to/3pjJsWQ
ROUND STONES INDIA
amzn.to/3pgZTTs
RUBY STONES
amzn.to/3ml2QR1
round ruby stones
amzn.to/3JcYZ2j
OTHER SHARPENING SUPPLIES:
Ruby stone 3k grit
amzn.to/3EI24Fl
ruby 4" stone
amzn.to/3o0rMzf
ruby Benchstone
amzn.to/3zsQ5aX
ULTRA SHARP 3 DIAMOND PLATES 2×6
amzn.to/3cS0yoy
Ultra sharp 3 diamond plates 3×8
amzn.to/2ZL8Cjf
Ultra sharp 2 diamond plates 3×8
amzn.to/3cGpkrT
ultra sharp 600 grt 3×8
amzn.to/3pGq5nG
ultra sharp medium and ultra fine 2×6
amzn.to/3ut51V4
Sharpening stone clamp
amzn.to/3oSvAPB
Ceramic Rod
amzn.to/2MU5SwW
DIAMOND ROD
amzn.to/3rLaXYU
Strop and compound
amzn.to/3oTJu3W
Strop and compound
amzn.to/3rraCJg
Diamond spray for stropping
amzn.to/36NxGtV
LANSKY COARSE DIAMOND STONE
amzn.to/3i7LzZZ
LANSKY MEDIUM DIAMOND STONE
amzn.to/3zHZegp
LANSKY FINE DIAMOND STONE
amzn.to/3BRcfX0
LANSKY FINE CERAMIC STONE
amzn.to/3rB47oK
venev stropping compound sample pack
amzn.to/36ND6VN
Smith tri stone
amzn.to/3pSa3b3
work sharp field sharpener
amzn.to/3rKoW03
Work sharp Benchstone
amzn.to/3tFP7GO
Tri stone
amzn.to/2YOPQHy
Jewelers loupe
amzn.to/3pXsA5W
KNIFE TOOLS:
Wiha magnetic driver
amzn.to/3aAavEB
Wiha Bit selector
amzn.to/39NTmIm5
Wiha Bits
amzn.to/3cXbotR
Wiha torque set
amzn.to/2YMp1Dw
Locktight stick
amzn.to/39RLs0F
KPL KNIFE PIVOT LUBE
amzn.to/3aBHacL
2 pack original & heavy KPL
amzn.to/2MDF5VR
Silicon Rings
JERAD’S: amzn.to/2PppWGg
KARA’S: amzn.to/2PrrS18r
***************
ppl CONSIDER VISITNG OUR PATREON!
Please keep in mind that we are still in the process of creating our patreon, the tiers may be adjusted as we continue to grow our page. Every tier will always be eligible for giveaways. We appreciate all of you for watching our content and supporting us!
PATREON LINK: www.patreon.com/user?u=20902236
To donate, contact or just have some good 'ol knife talk with the Neeve's DM us on Instagram @neevesknives
LINK: neevesknives?ig...
OR
Contact us by email at jrneeve@gmail.com
(Instagram is preferred)
NeevesKnives Paypal 
Развлечения
![A Day To Remember: Feedback [OFFICIAL VIDEO]](http://i.ytimg.com/vi/iXVnysmQ4e0/mqdefault.jpg)
![KFF Singapore Badminton Open 2024 | Alfian/Ardianto (INA) [7] vs. Liang/Wang (CHN) | QF](http://i.ytimg.com/vi/g0QGafkoT2o/mqdefault.jpg)
i recently bought the base level work sharp precision adjust and while i have no doubt these pieces will enhance the experience, the device itself is by no means terrible without them and deserves praise.
If you want your stone as clean as new, try washing them with dish soap and a fairly hard household brush. Thanks for your very informative video!
WOW! Thank you Jerad for all the information.
Appreciate the suggestions. I have a buddy who loves to sharpen knives and does a great job but i'm learning.
Thanks Jared ✌. Always learn alot From You .
That base holder is clutch. Won't have to apply a lot of pressure with my other hand to hold it down. Thanks for showing us the gear Neeves!!!
👊
Thanks for the great info and all of the links. These 3D printed aftermarket parts are going to be a godsend for me and actually make my sharpening MORE consistent. I was sick and tired of having to hold the Precision Adjust with one hand and use the other to sharpen my knives. It was a major pita and my angles were slightly off because of it, resulting in less sharper blades.
I'll be buying these 3D printed parts within the next few days, including a 1"x4" leather strop too from Amazon. Now I can FINALLY start sharpening my 30+ folding knives and at least that many COMPLETELY dull kitchen knives.
The stabilizer for under the knife clamp, and the base stabilizer for the end of my table are definitely going to make the biggest difference. I am hoping and praying that the magnetic low angle clamp works as good as I hope it does!!!
I'm also going to buy 1x of his wooden 5 knife displays and 1x of his wooden 10 knife displays. Now I'm really excited to get everything and start using my Precision Adjust again. I've been so fed up with it and disgruntled, that I've only used it on a handful of knives.
And also, thank you VERY much for your other videos. I watch a lot of them, and I'm rarely on RUclips watching shit. But when I am, I'm usually watching your knife videos. Especially anything about the Precision Adjust
A lot of information here - very detailed and definitely appreciated.
Thanks so much for your great videos. I'm surprised they haven't come up with a suction cup attachment for the base.
Just ordered the base worksharp precision with the Etsy brace. I plan on upgrading eventually but just don’t have the funds to go full kit. Can’t wait to get it in and get my blades back sharp.
FYI Pencil Erasers work GREAT to clean Ceramic Rods and Diamond Plates/Stones, I prefer GUM ERASERS in the cube or rectangle box shape….
Yes they do as long as it's not built up to much there's lots of ways to clean Ceramic, bar keepers friend works the best imo
Wonder how a clay bar used for automotive paint would work n the ceramic. I got a Spyderco’s bigger stones. Will give it a go and report back.
I’ve used a magic eraser on both diamond and ceramic with decent results. As well work good on knives to clean.
Another thing I discovered works well for cleaning is Traeger grill cleaner. Food safe. Took pine tar off that 99% alky wouldn’t cut.
that scrubber brush with the soap in the handle everyone has is what I use . Love a ceramic rod . Cheap too
It's a awesome system. I use mine all the time. And it's a great price as well. Thanks man. Some good ideas
Do yourself a favor and keep an eye out for the upgrades that Gritomatic will soon be selling for the Work Sharp Precision adjust. It's gonna be EPIC.
Awesome vid with great information for anyone with the worksharp system. Love how specific your recommendations are for this system and how helpful all the sharpening tips you've given in the past, they are amazing for anyone who wants to get into sharpening or who have been sharpening for years. Keep up the great work and keep making sharp things fun and enjoyable
Work sharp
Outstanding!
Great video! The knife holder support block if you're using the aftermarket bigger stones, yeah, you'd probably need that support, but if you're flexing that with the stones that come with the kit, you'd be applying to much pressure...of course!!
Really great video showcasing some of these fantastic mods for the Worksharp system! However, I have one gripe which must be on other peoples minds...
One of the good things about this system is the cost. It's a great system, for a reasonable amount of money. (£50-60 approx here in the UK).
These 3rd party, mods are exellent, but to suggest stones that cost as much or MORE than the whole system itself? And to get a few different grits too? Say goodbye to £200+ for about 3 stones. That's triple the cost of the entire sharpening system dude. Might was well just buy a £200 sharpener at that point.
Very true. But even with the higher priced systems your still going to need to buy stones, it's just the way it is sadly.
With that said, you are still paying significantly less with this system as opposed to any of the tsprof type systems out there. The closest in price to this is the kme and it's still nearly 2x thr price.
Just my .02
I think the average user will be fine with the elite system, and if looking for a mirror polish add a 3D printed lapping film holder and a set of lapping films for like $20. $119 + $20 and you’ve got enough get a screaming sharp edge and a mirror polish if desired (and even fix a lightly damaged edge). Anything else is going down the rabbit hole for diminishing returns.
This is awesome!
I like the adjustable stone holder really useful 👌
Great video, huge thanks. :)
Thanks!
Love the vids bro this jus another good one I been using lansky turn box 4 ceramic rod version free hand an has made quick touch ups so much easier
Nice!
Sweet!🙌🏻
Great job 👍👍👍
Game changer.
Appreciate your content. Questions: 1) in terms of results, what difference is there be stones vs sandpaper and 2) method to sharpen serrated blades. Thanks
Jerad, I have been sharpening knives for a very long time but you have really "Honed" my sharpening game. I get better results much more consistently while freehand and fixed angle sharpening after learning from your videos.
Pay attention people, this is good to know.
Thanks Jerad!
🙏
Agree!!
I just got the 60$ one and love it. I still want to get good at hand sharpening but with good diamond stones and develop more patience. This helps me when I'm impatient to get a good edge. Have you heard of sharpal angle pyramid guide? I bought $12 diamond stones at 200 grit, 600 grit, and 1000 grit with the sharpal angle guide and that helped me a lot. I love that you share sharpening videos. Keep it up btw I'm subscribed
12+ years ago I bought a Course, Fine and X-Fine 3 X 8 Dia=Sharp Plates. I have since acquired the WS Elite Knife Sharpening Solution, also The Ken Onion and also this Precision Adjust. I went back to hand sharpening on 8 X 3 Dia-Sharps and recently added the same size double sided VID for polishing. Couldn’t be happier. I don’t own a recurve yet, but the fact that I might and maybe some major re-profiling and sharpening and polishing ancillary other tools is the only reason that I see for keeping the Elite. If folks listen to your hand sharpening videos they can do with out all this stuff and the time it takes to set it up and put it away and store it. I RV a lot and one small zipper clutch bag contains everything I need. Quite frankly, I’m producing better results that all those high tec systems did.
👊 freehand is definitely more satisfying and there's many ways to help get good results with little skill
So much vital information for the "noob" getting into sharpening like me. Thanks again.
I have a Sharpening playlist of alot of great information including full Sharpenings
Great video!!! I need the adjustable 4”to 6” stone holder shown in your video. Please tell me when I might be able to purchase this holder.
Great information brother
You can simply put a normal clamp from Amazon on the front of the base as well as long as you can sit it towards the front of a desk to clamp it to.
Great vid! Question…was the base clamp available from the same place as the arm brace? Not seeing it on your links. Thanks much!
This is great! Can I download these parts for the printer somewhere?
I added a small piece of black foam in the back of the knife clamp to hold the clamp open. I really didn't like the way they just flopped around when trying to put a knife in. I was going to put some small springs in but the black foam works perfect.
Hi Gerrard, I can across your site when looking for a sharpening kit and have found you most helpful. Ordered a work sharp precision adjust and it’s on its way. I’m in the U.K. and want to get the stones you recommend but finding it difficult to source at the minute as everything seems to be out of stock or based in the U.S. Great channel and very informative. 👍🏻
You can try to contact venev directly, they are based out of Russia. Also there are other kinds of resin bonded diamond stones that are sold by gritomatic or other places online, try this
vidbrusok.com/
@@NeevesKnives thanks buddy 👍🏻
@@NeevesKnives what other resin bonded stones would you recommend for the work sharp precision adjust? Bet you get asked all the time!! 😳😂
I’ve had The bench stone knife sharpener from them and the guided sharpening system but the one that I have currently that I’d love is the field sharpener for 30 bucks
It’s the best value
Yeah the field sharpener is my most recommended
I’m new to knife sharpening, but the field sharpener is great IMO. Was able to put some pretty decent edges on all of my kitchen knives, my main fixed blade and some pocket knives. Definitely worth 30 bucks
I can vouch for the Klein Tools digital angle finder, it's what we trust for bending electrical conduit in exposed locations 🙏🏻👌🏽
Thanks for the vid ! Did you notice some wiggle with the 4 to 6" stone holder on the rod ? I have the 4" Gritomatic one and it has too much room around the rod, it makes a lot of angle variation. (I found a cheapo fix with paper, but a better stone holder would be cool).
Ty !
These don't have as much wiggle as the gritomatic holder. I noticed the same thing with that one, and this is far better
The blade holder is great! My only gripe is that there is not a stable base to put an angle finder to confirm the angle.
I have this Work Sharp Precision Adjust Knife Sharpener set up. I currently have the 2k grit kuromaku, 3 abrasive rod that come with the kit, 320 grit diamond, 600 grit diamond and the fine ceramic, but I feel like the 800 grit stone is needed in my possession.
I am sharpening nitro-v, m390, 7Cr17MoV and Sandvik 14C28N steel flipper pocket knifes. Not really re-profiling edges.
- Tanto
-straight back
-drop point
What stone would you suggest as a finishing stone for nitro-v and m390 ?
What would u say is better the lansky or the worksharp??
I noticed that 3 in 1 oil is in back ground .i love that stuff but cant find it at stores anymore. Great video by the way.have a blessed day
I usually link it in description
I have bin looking for a place that sells that little blue thing that helps with the wobble when sharpening thanks for the link
Awesome video was well worth the wait. Would the DMT plates be good as well? A couple people have mentioned those to me. Thanks again for the great video!
Yeah for sure, I personally like the Ultra sharp plates better and they v are more affordable, but the atoma plates are my favorite as far as diamond plates go
@@NeevesKnives thanks for the recommendations
Hey Jerad, what are your thoughts on milwaukee knives?
Thanks for the suggestions! How does this stoneholder work vs the Gripmatic?
I like this one better the gritomatic shifts a little
@@NeevesKnives Thanks for the response! I ordered these along with the stones you recommended!
Awesome video. Where can I find the base plate clamp?
Etsy
thanks for the video. Is there an attachment for convex grinds?
I'm not sure
I have the lansky set and I hate it. Yes it is cheap but I will definitely buy this and give it a shot!
You won't look back, that I can assure you.
Is this system appropriate out of the box for elmax?
Best sharpening system hands down is the Tormek t-4 or T-8 just because its a wet stone system and will allow the edge to stay sharper longer sins no dry sharpening is heating up and softening the fine final edge.
nice
Great tips.. great vids... thanks por your tips and all...
What are the ruby stones for
Have you ever used those 3M lapping films for a mirror finish? I watched a few videos on it and it looks like it does a good job. He just sticks them to the ceramic Stone. Thoughts?
yeah they work i prefer a stones and strop but to each their own they def work though
I need some sharpening supplies. My strop isn't gonna tide me over forever. Maybe Santa will be nice to me. I've been a good boy this year!! ✌️
Ata boy
Just wondering where to find these 3d parts for worksharp Station. Also the 4" stones. Went on Amazon and got even more confused. Thanks for the great information so far!!
I have another video on these and there's a link in the description to etsy, so the maker is on Etsy. Gritomatic has a few things as well that are aftermarket attachments but not 3d printed
Great information and attachments for the work sharp! Are all these stones the same thickness as that can affect your sharpening angle.
Edit: I see you addressed that later in the video
I own a few Benchmade knives. I have a griptilian with S30V blade, a 581 Benchmade 581 Barrage spring assist with with M390 blade that has never been sharpened before. The knife is still brand new but the blade is not very sharp. Anyway I am fed up reading about blade angles. Everyone says something different plus you can not point to a descent article about what the blade angle should be sharpened to. It is really frustrating. I bought the Work Sharp Professional Precision Adjust™Knife Sharpener awhile ago but am afraid to use it as I do not want to screw the blade up. I also own a few different brands as well. I wish there was a set angle to sharpen it to but everyone has a different opinion on what that angle should be.
What about the magnetic holder for low angle sharpening? Any good?
I'm not sure I know what you mean?
@@NeevesKnives they had an attachment that held the knife using a magnet instead of the clamp, so you could use low edge bevel angles. On the eBay link you posted.
@@jacknemo8021 oh sweet, yeah I also have the chisel sharpener which I forget to add in the video
There is supposed to be a Bracket that attaches so you can use a different clamp to hold knives with thicker blades but haven't seen it in production yet
Gritomatic has 2. The larger one handles up to 7mm (9/32")
I'm gonna send you my version of the clamp supports, they're a fixed size so no screw adjustment, they slide in and lock into place.
The one I have I leave in a fixed position I normally don't screw or unscrew it after I have it where I want it, that's what I was trying to explain in the video
where can you get the base holder and scissor clamp?
YOU CAN GET THE STONE HOLDERS FROM MY HAPSTONE LINK IN MY MOST RECENT VIDEOS, OTHERS ARE FOUND ON ETSY
Where did you get the bracket for holding the sharpener base?
Links in description
How well does the 6” holder fit the slide rod??
Fine, but you can't get the full length of the stone to hit the edge on most knives
The attachments that keep the blade holder ridge, where can I get a couple ?? I not very savory on the internet so someone PLEASE let me know. Thanks in advance.
I linked it in the description, there's an arrow on the side, or a spot that says more, hit that and the description will pop down and you can hit the links but here I grabbed it for you.
AFTERMARKET ATTACHMENTS
www.etsy.com/shop/Practical3DP
Can you please tell me have you tried to sharpen microtech ultratech with this worksharp. I’m concerned the narrow blades won’t work especially on the utx70 being so tiny.
Yeah you could do it but it will be a very high angle
@@NeevesKnives can you recommend a similar system that’s guided like this but not extremely expensive that would work well with them. My collection consist of more than 10 ultratechs utx85s and utx70s
@@jamesfair9751 the lansky but make sure you get the system with diamond plates, and the base will be sold separately but is a must. If your not scared of freehand with guide angles the work sharp field sharpener is amazing
@@NeevesKnives I’ve ruined every blade I’ve ever tried to free hand lol never tried anything expensive but I’m pretty sure I would mess them up too.
@@NeevesKnives I just noticed when looking at the aftermarket parts for the worksharp they have a magnetic blade holder it says for getting very low angles. I would assume that would work on the ultratechs but I’m not sure it could hold the knife without moving around.
Where can i buy that plastic support piece that fits under knife clamp ?
Watch my work sharp aftermarket attachments, the one that has a lot of attachments it's linked in description. Or check etsy
Looks like I need to drop some more money into this thing. It's still in the box lols. Speaking of which I still need to send you my Kristal Knives Bronze Horseman 2 to fix the tip. It came bent or burred, can't tell. 👉💥
Yeah hit me up
@@NeevesKnives will do my brother
Where do we find the stone holder and the under grip ???
Links in description the second one should have everything
i’m a couple years late to this but but i’m looking at picking up the 4-6in plate holder and the clamp brace then maybe snatching up the 1200/1500 venev stones to go with (i already have 220/600/800 grit for the precision adjust now so i really only need polishing stones) i was considering the dmt diasharp plates but it’s the same price for a coarse/fine/xtra fine dmt set as a 1200/1500 venev set and the venev are definitely higher quality
Anybody know when these venev greater dog stones are supposed to be back in stock?? Ive been looking for a couple weeks still not in stock.
I linked some other ones in the description the greater dogs are just wider but are not necessarily better, the 1 inch ones work great, they are a great width for Sharpening. But no I don't know, you can probably buy some directly from Russia
Nice extras, but i have a hard time buying a product then spending more to improve to a point the way it should come from factory
How well is the stone holder made? Look like some cheap plastic...
Is there a less expensive set of stones that will work nearly as well? Im kinda looking bang for the buck hence buying the worksharp vs kme or wicked edge. I purchased the 3d printed items you recommended but got a bit of sticker shock on some of the stones. Help a broke brotha out please 🙏
Yes diamond plates, any really, atoma is great or any gritomatic 1×4 diamond plate
@@NeevesKnivesdo u recommend a 140 atoma plate and the f100-f800 venev set (2 double sided stones). Im trying to not by a ton of unnecessary stone/plates? Btw thanks for responding to me.
@@Toasty_Woasty no that would be to big of a jump, you need a stone between those, the f800 and f1200 are polishing stones, the atoma 140 is an extra coarse reprofiling stone, so you need something around 300 and 600 then 1200 before going to the f800, the venev stones grit rating is different f1200 is around 5000 grit, get the atomas 140, 400, 1000, or the atoma 140 then the venev 240/400
@@NeevesKnives awesome that helps a lot. The venev numbers are a bit confusing. I thought i could use the atoma 140 then venev plates f100 , f240, f400 and finish on f800.
Ill order what u are recommending, thanks again.
Is the table top attachment still available? Wasn't in the links.
Thanks
Check my other attachments video, it's linked in that one, however you can find them on Etsy
@@NeevesKnives Thanks for the response!
These are all 3d printed items, where can we get the files? The etsy shop only sells fully printed from what I can tell.
Micky Mouse Sharpener!!
The first accessory you show does not have a link?
The second link takes you directly to all the aftermarket attachments that were 3d printed
Way to advanced for me! But like I said in another video, you really know your s- - t!
👍👍👍👍👍
Using the support changes the angle by 4~5 degrees and is a bit of a pain in the butt to change constantly does anyone else agree that using light pressure the angle doesn't change on a stock setup ?
As thin as the Worksharp stones are, a recurve attachment seems a bit redundant. The basic Worksharp stones should be fine for recurves wouldnt you think? They are only 1/2 inch wide.
Yes absolutely
The Buck Spitfire has a difficult recurve. I used diamond to make it flat on my s35vn version as it was being a pain with the worksharp. Now? Easy peasy to sharpen!
All these add-on parts make this system nice but the money spent to make this system more premium takes it to a price point of much better systems.
For sure, but if your someone who already has the system or can only make small purchases at a time you can slowly create a great system
stone holder looks very good but with postage its over £85 so will give it a miss
No attachments ship to Canada...
Would like to have a complete system that didn’t require buying any aftermarket parts. Does anyone know of such a system?
Kme or tsprof
@@NeevesKnives I watched a review on tsprof and it’s highly recommended. I might check into that one. It’s a little expensive but I’m betting well worth the $$
With all this kit, shouldn't you just get a KME?
You could, I think most people that will give this route will be buying it in parts not all at once. Obviously if you have the money all at once get the kme, and if you have even more go with TS prof.
I hate to say it but for the price of the kit with the extra grits, then add in all the extras, it puts me so close to the price of the pro model I might as well just save a bit longer for that one
I believe my venev Scorpion stones are 3 inch.
1×4
Man has anyone had a crkt helical. Ive tried sharpening it so much using this and the shit just wont make a good burr and wont get shaving sharp
Follow the grit pattern, you probably tried putting to low of an angle on it which is much more time to sharpen especially on a system with small stones, you need a coarser stone or use a higher angle
@@NeevesKnives thats the confusing thing ive been using a sharpie to double check my reprofile progress and it should be full contact by now. So you think i should hit it with a more abrasive stone(i have your aftermarket recommended parts ) and be extra diligent
great video just can't buy the greater dog lol all bought up. Must be a low small production company.
Venev stones are made in Russia, they make a lot of different stones, and I think that stone has been being bought up, but usually wasn't there most popular, the regular dogs work just as good
@@NeevesKnives yea, I did buy one of the 400-800 6x1 stones to use with the attachments for the worksharp, it's a solid stone, just have not tried it out yet. The attachments are nice and they seem well made by the guy that prints them.
@@NeevesKnives I also got the SWEET! add ons to the WorkSharp sharpener from this guy on etsy and they are really solidly made and sick. Thanks for showing me.
Take a shot every time he says grit
I should of bought this one, rather than the KME.
TMI TMI overload! The sharpener seems like it's too compact to me but I could be wrong!
It's supposed to be compacts
Is it better to just buy an elite system instead of buying this and all the aftermarket parts?
Probably, I'd you don't have a system yet then yes I'd advise to just get a complete system, you will probably want to get other stones exc in the future but you will have all the parts, try KME or TSPROF Blitz or KADET
Or buy a KME ?
Or buy a good sharpener like the tsprof blitz blase. Compared to that the work sharp is just a plastic toy.