Hi vert Nice and clear explication ,I just changed the rocker cover gasket and unplugged the wire,and now that I’ve reassembled everything,the engine is going very badly:( Do you think i have to reprogramming the injector? I still used the the same than before,I don’t understand
No, if you haven't changed the injectors then they are the same and no need to re-code as code will be the same. changing a rocker cover gasket shouldn't have made any difference detaching/reattaching the electrical connections, but you may have upset the connections or disturbed a wire that may have broken etc. take off each connector and listen to the sound to find which cylinder has no change - this will be the one with the problem. If all the same then you could do a continuity test of the individual wires traced back to the connection block looking for open/ high resistance. These engines are prone for injector issues.
Hi Harvey, After looking everything try to do the way back I find 1 connector broken,I was super happy to find that and ordering a new one.. After changing the connector the problem still here:( Do you think is possible to the injector be clogged?with out touching them? Should I take them all off and cleaning ?
@@nuncnovus3579 If you took the return lines off etc you should bleed the fuel system! The best way is to loosen up the high pressure lines of the injectors and take out the fuel filter and fill it to the brim with diesel! Do this a couple of times and your car should start! I had the same issue with ford mondeo mk3 2.2 tdci... (same engines)
I literally just ordered the Icarsoft 3.0 off Amazon ? its not even arrived yet, , would you suggest the KINGBOLEN over the Icarsoft ? or can the Icarsoft do this as well ?
The kingbolen is subscription based after first year around _80 dollar and is quite comprehensive, but I haven't used it for long enough to recommend or not recommend yet. I can only recommend vagcom atm as that has been around and extensively tested to be an excellent diagnostics and more obd2 tool.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Good information and explanation
Glad it was helpful :-)
Nice one Harvey!! Looking forward to future x type videos. "Thanks" Good Channel (well narrated) 👌
Thanks, your very welcome :-)
Hi vert Nice and clear explication ,I just changed the rocker cover gasket and unplugged the wire,and now that I’ve reassembled everything,the engine is going very badly:(
Do you think i have to reprogramming the injector?
I still used the the same than before,I don’t understand
No, if you haven't changed the injectors then they are the same and no need to re-code as code will be the same. changing a rocker cover gasket shouldn't have made any difference detaching/reattaching the electrical connections, but you may have upset the connections or disturbed a wire that may have broken etc. take off each connector and listen to the sound to find which cylinder has no change - this will be the one with the problem. If all the same then you could do a continuity test of the individual wires traced back to the connection block looking for open/ high resistance. These engines are prone for injector issues.
Thank you very much for the advice,I’m going to see everything again this weekend!
Hi Harvey,
After looking everything try to do the way back I find 1 connector broken,I was super happy to find that and ordering a new one..
After changing the connector the problem still here:(
Do you think is possible to the injector be clogged?with out touching them?
Should I take them all off and cleaning ?
@@nuncnovus3579 If you took the return lines off etc you should bleed the fuel system! The best way is to loosen up the high pressure lines of the injectors and take out the fuel filter and fill it to the brim with diesel! Do this a couple of times and your car should start! I had the same issue with ford mondeo mk3 2.2 tdci... (same engines)
I literally just ordered the Icarsoft 3.0 off Amazon ? its not even arrived yet, ,
would you suggest the KINGBOLEN over the Icarsoft ?
or can the Icarsoft do this as well ?
The kingbolen is subscription based after first year around _80 dollar and is quite comprehensive, but I haven't used it for long enough to recommend or not recommend yet. I can only recommend vagcom atm as that has been around and extensively tested to be an excellent diagnostics and more obd2 tool.