I HAD to subscribe! I just converted a 12?" Action Figure into an RC Skydiver on my channel and you have some great videos! Best of luck and my regards, Dave
The history of the construction and all the plans of my jumpers can be found on the "Polish RC Modelers Forum" (PFMRC) in the subject "RC SKYDIVER". I also recommend German pages about RC FALLSCHIRMSPRINGEN. Costs depend on the possibilities. Mine were not big. One jumper is about $ 20 The most difficult to build a parachute. Good luck
witk 45 Hello frame - handjob Lipo Battery: 4S HP2814-710KV Brushless Motor With The Motor Mounts rctimer.com/product-859.html Regulators 22 A 2-4 S radio-modele.pl/regulator-fast-pwm-esc-ipeaka-iq22a(-simon-k-firmware),539,20381.html DJI Naza M Lite with GPS radio-modele.pl/dji-naza-m-lite-+-gps-zestaw-combo-firmy-dji---dji0122,454,25826.html propeller APC SF 12x 3,8 abc-rc.pl/smiglo-APC-12x38-SF Eleres www.dropbox.com/s/qmxzof6tkk1t583/eLeReSTxmanual.pdf?dl=1 allegro.pl/antena-2m-70cm-bnc-diamond-rh-771-szybka-wysylka-i5513558006.html Turnigy 9x + openTX I helped? The jumper's weight is 900-1200 g. 4 engines with this power give advice
3:05 didn't do so hot but you're not fixing a line twisted streamer. It's not his fault though, the rigger didn't pack his reserve and I blame the packer. Maybe if the toggles weren't permanently attached to his hands he could pack his own.
I jeszcze jedno pytanie. Parascending? Te filmy z serii:"skydiving canopy # "są Twoje? Bo mam starego Feniksa i już latałem ciągniony za pojazdem. Pogadałbym o tym na osobnym kanale ; ) Pzdr
Wszystkie czasze które mam są dziełem najlepszego z najlepszych o nicku "mayster8405", znajdziesz go na wielu forach modelarskich np. PFMRC i paralotniowych ale już od dawna deklarował zerwanie z tym. Spróbować zawsze można. Pozostaje import z Niemiec. Tam jest kilka firm ale "to nie są tanie rzeczy".....powodzenia
I HAD to subscribe! I just converted a 12?" Action Figure into an RC Skydiver on my channel and you have some great videos! Best of luck and my regards, Dave
👋
where can i get plans for this ..You said you built this ..?..whats the cost involved .?......thanks
The history of the construction and all the plans of my jumpers can be found on the "Polish RC Modelers Forum" (PFMRC) in the subject "RC SKYDIVER". I also recommend German pages about RC FALLSCHIRMSPRINGEN. Costs depend on the possibilities. Mine were not big. One jumper is about $ 20 The most difficult to build a parachute. Good luck
@@witk4553 went on there but could not find it,.... and besides it was not in English so i could not navigate around .......
If would like to entertain a more D-I-Y version, I just converted a 12" Action Figure into an RC Skydiver on my channel!
this was cool
Hi. What s the drone details? The power to lift an rc jumper?
Thank you
witk 45
Hello
frame - handjob
Lipo Battery: 4S
HP2814-710KV Brushless Motor With The Motor Mounts
rctimer.com/product-859.html
Regulators 22 A 2-4 S
radio-modele.pl/regulator-fast-pwm-esc-ipeaka-iq22a(-simon-k-firmware),539,20381.html
DJI Naza M Lite with GPS
radio-modele.pl/dji-naza-m-lite-+-gps-zestaw-combo-firmy-dji---dji0122,454,25826.html
propeller APC SF 12x 3,8
abc-rc.pl/smiglo-APC-12x38-SF
Eleres
www.dropbox.com/s/qmxzof6tkk1t583/eLeReSTxmanual.pdf?dl=1
allegro.pl/antena-2m-70cm-bnc-diamond-rh-771-szybka-wysylka-i5513558006.html
Turnigy 9x + openTX
I helped?
The jumper's weight is 900-1200 g. 4 engines with this power give advice
@@witk4553 thak you very much. What do you think a hexacopter with 8inch props and 4 cells can lift a jumper?
Thank you
Tom
@@swatosi I think it still depends on the engine power and the weight of the jumper. I find it difficult to judge. You have to test ; )
Witek
Those little guys are bosses at malfunctions.
3:05 didn't do so hot but you're not fixing a line twisted streamer. It's not his fault though, the rigger didn't pack his reserve and I blame the packer. Maybe if the toggles weren't permanently attached to his hands he could pack his own.
Good morning
What plan did you use to make your parachute?
THANKS
Good morning. A friend of mine makes parachutes. I only build jumpers and combine it with a parachute.
@@witk4553 is the plan available
Where did you get the parachute
A friend sewed me
Can these chutes actually be steered ?
Yes, you can fully control the parachutes.
Ups! Falló. No hay paracaídas de reserva? 😂
No es necesario
Son inmortales ... ; )
Where do you get the skydiver from
I built myself
@@witk4511 You could turn this into a commercial product.
Try base jump with it 😋
Nice diving👍
Ladnie ci wyszło :) Robie teraz czasze 36sqft (245x138cm) Wrzucę film z oblatywania czaszy jakość za 3 miesiące ;)
Dzięki. Czasze robisz super a skoczek? Coś drgnęło?
I jeszcze jedno pytanie. Parascending? Te filmy z serii:"skydiving canopy # "są Twoje? Bo mam starego Feniksa i już latałem ciągniony za pojazdem. Pogadałbym o tym na osobnym kanale ; ) Pzdr
@@witk4553 tak, sa moje. Latam u maxfly w bydgoszczy - on prowadzi cale szkolenia parascendingowe wiec zapraszam :)
Narazie szyje czasze do rc skydivingu na zamowienie i dalem sobie tymczasowo spokój z zabawą w to
ktoś w Polsce szyje modele czaszy?
Wszystkie czasze które mam są dziełem najlepszego z najlepszych o nicku "mayster8405", znajdziesz go na wielu forach modelarskich np. PFMRC i paralotniowych ale już od dawna deklarował zerwanie z tym. Spróbować zawsze można. Pozostaje import z Niemiec. Tam jest kilka firm ale "to nie są tanie rzeczy".....powodzenia
Fail Jum ataack
Huuh