Enjoy the new build video. The Pryme MX contest ended yesterday and I was able to get my final entries in. I'll be putting up the next build vid and my final entry video this week. For a sneak peek check out my Instagram @wild_moto and @jourdongulick.
Nice job Jourdon! I've watched a million YT videos where peeps are lazy. You are like me, clean it up and polish it. I go so far as to file off the casting seams and Mothers polish everything. Yes! I have several dremel tools and a machine shop now. I'm probably older than your pops. RedBud is my local track, been there many times. I like your shed shop.
Jourdon Gulick exactly! I feel like it should be a “restoration” contest not how many bling and new parts can I throw on this to make it look good. Yours will be tight dude 👌🏻
hell yea man just got a 1990 cr250 for $500. condition is rough so im gonna try restoring it as much as i can. mind you ive never really worked on bikes i just got a pitbike for the first time last year. still gonna send it/ your vids are awesome dude! subbed
I recently seized my engine (I think won’t kick at all) and getting ready to rebuild wasn’t to excited to start bc I’ve never rebuilt an engine but this made me feel a lot better
@@JourdonGulick yeah! I got a 91 cr125 I just built, but really looking forward to this cr250, got it for a grand, needs cylinder reserved, I gotta check out the bottom end. Bike came in pieces
Love these motors. Using that plastic cover for the flywheel you'll want to take it off an clean inside when you really get the bike dirty. Like you said idk why honda still made those plastic side covers. Great build man.
I know that this is too late, but I had a chain adjustment bolt problem. Solution was to grind down the nut evenly as thin a needed. Still working ten years later.
![Fixing The Honda CR250 Engine [Ep. 3]](http://i.ytimg.com/vi/mrIFhlsXxyA/mqdefault.jpg)
![Fixing The Honda CR250 Engine [Ep. 3]](/img/tr.png)
Enjoy the new build video. The Pryme MX contest ended yesterday and I was able to get my final entries in. I'll be putting up the next build vid and my final entry video this week. For a sneak peek check out my Instagram @wild_moto and @jourdongulick.
What did you use to shine the engine up like that
Nice job Jourdon! I've watched a million YT videos where peeps are lazy. You are like me, clean it up and polish it. I go so far as to file off the casting seams and Mothers polish everything. Yes! I have several dremel tools and a machine shop now. I'm probably older than your pops. RedBud is my local track, been there many times. I like your shed shop.
Engine looks fresh as f🔥 looking forward to the rest of the build🤙
Turned out great. Thanks for watching 🤘
Best motor ever...
Lookin good dude! Can’t wait! I like how you aren’t just throwing every little piece of bling on it! Stock look! 👌🏻👌🏻
Yeah, too many builds like that. Plus, a lot of people don't really have the ability to drop $5k in parts and powdercoating.
Jourdon Gulick exactly! I feel like it should be a “restoration” contest not how many bling and new parts can I throw on this to make it look good. Yours will be tight dude 👌🏻
Awesome 😎 vid Brother. Cr250 2stoke is my dream bike build.
Thanks. Hope you find one 👍
hell yea man just got a 1990 cr250 for $500. condition is rough so im gonna try restoring it as much as i can. mind you ive never really worked on bikes i just got a pitbike for the first time last year. still gonna send it/ your vids are awesome dude! subbed
Right on. Sounds like a cool bike to fix. Take your time, learn from RUclips, lots of good info our there.
Thanks for watching 👍
Cold start.
If a wrist pin is that bad I replace crank.
Real aggressive build 🔥🔥
🤘🤘
great video as usual. very impressive that you manage to keep your clothes so clean!
Thanks. Haha, can't be ruining shirts every episode 😂
I recently seized my engine (I think won’t kick at all) and getting ready to rebuild wasn’t to excited to start bc I’ve never rebuilt an engine but this made me feel a lot better
Just bought a 2000 cr250, il be checking out the motor and rebuilding the top end too!
Nice. Great bikes. I have another 2000 cr250 hanging out in my shed that I'll get to eventually as well.
@@JourdonGulick yeah! I got a 91 cr125 I just built, but really looking forward to this cr250, got it for a grand, needs cylinder reserved, I gotta check out the bottom end. Bike came in pieces
First time seeing this , pretty dope bro
Thanks for watching 🤘🤘
Love these motors. Using that plastic cover for the flywheel you'll want to take it off an clean inside when you really get the bike dirty. Like you said idk why honda still made those plastic side covers. Great build man.
Thanks. Yeah, aftermarket cover there is worth the money.
I voted for your 250 brother. Good luck brother
Right on 🤘
What did you use to shine the engine up like that?
I know that this is too late, but I had a chain adjustment bolt problem. Solution was to grind down the nut evenly as thin a needed. Still working ten years later.
dude i have a 1990 cr250 and i cant find the right side clutch case lol do you know what models will fit a 90?
Not sure.
The chain adjuster bolt on my '01 broke inside the swingarm. What do you think is the best fix? Thank you once again!
You'll most likely have to drill it out and retap the threads.
What exactly did you use to push that seized wrist pin out? Much respect for quality of the builds in just a small shed🤘🏼
Just a combination of a bolt, nut and large washers I had laying around. Appreciate it 👍
I’d say you should replace the reed flaps. I’m sure it’s gonna be a 🔥 build 🤙
👍👍
lean on the main jet would be the problem or crap partially clogging it! Causing high EGT
Ottimo 👍
what buffing pad do you use?
You can get some cheap ebay scotch brite pads or take a look at PrymeMX.com for some more durable ones.
Great stuff man but try putting components on instead of throwing them on
Ik this is 2 years ago but that’s a wiseco piston that came out of it 🤣
If you’re going to do something right do it right V Force all the way I love your motor stand to thanks for the excellent video ☘️🇺🇸🤘
Looks like a weisco (seizco) piston
get the vforce reeds sick build
👍
🔥
Love your vids what year is this engine ?
'01 bike and engine. Last year of this engine family. Some say the best Honda 250 engine.
Keihin pwk38 air striker swap the bike the tmx is junk ! and a 02-07 crf 250 swing arm will work on this bike and it a good swap
Someone at one point ran it very lean