Thank you for the video! Just did this today, those hex bolts can really get stuck bad, we got it loose by heating the surroundings with a blowtorch, hammering in a torx bit and then using an air-powered impact gun. Needed new bolts afterwards of course...
For anyone struggling to put the ABS ring on the new disc, try heating it up evenly until it is hot and then lightly tap it with a hammer. That did it for me.
The pads should go in easy... you should clean the pad guides before inserting the pads, no hammer action needed, also the caliper Could be pushed in with a pair of needle pliers no press neded!!!
Agreed, I used the one in my A4 ONCE to change a set of wheels, by the end it was so tweaked out of shape it was frightening. That was on flat ground inside a garage, too.
Thank you for the video!
Just did this today, those hex bolts can really get stuck bad, we got it loose by heating the surroundings with a blowtorch, hammering in a torx bit and then using an air-powered impact gun. Needed new bolts afterwards of course...
For anyone struggling to put the ABS ring on the new disc, try heating it up evenly until it is hot and then lightly tap it with a hammer. That did it for me.
What is the torque wrench setting for the nut please
Danke hat super geklappt ❤
is the hydraulic jack so expensive?
thanks for this video! I searched it so far!
Hey which model is a4 b5 which year , saloon , avant and wht engine code or how many cc
the 2000 A4 B5.5 Facelift 1.9 TDI Avant AJM has the exact same setup.
Very informative video. Thank yyou
Thank you
The pads should go in easy... you should clean the pad guides before inserting the pads, no hammer action needed, also the caliper Could be pushed in with a pair of needle pliers no press neded!!!
bonus hit
fantastic car love bug's and FT bonito's :D:D:D
Nice vid but use a proper jack, that widowmaker is dangerous.
Agreed, I used the one in my A4 ONCE to change a set of wheels, by the end it was so tweaked out of shape it was frightening. That was on flat ground inside a garage, too.
bye bearing lol
thanks this was hard to find
+Charles Samuels i know that's why we made this vid thanks for watching and leaving a comment 🖒