Great video. I'm happy to see you using the ToneX One with the GX-100. I've been using the ToneX pedal with the GX-100 for about 18 months now and I love this combo. Out of curiosity what is your input sensitivity on the GX-100 and input trim setting on the ToneX One? My settings are +5 and +1 respectively. I'm looking forward to more videos.
Hey man, thanks for commenting. I kept the global settings of both as they came from the factory. At least these two captures I use on the TX1 sound really good with all my guitars. I adjusted the drive levels on both captures since the Rect was too intense and muddy, so I kept it around 10 to 11 o'clock. The Dumble wasn't clean, so I cleared it up by reducing the drive, adjusted volume, EQ, turned off the NR, Rect's comp, and reverb. Maybe these adjustments offset the +8.5 on the Trim. I'm really enjoying these two captures, and for now, I've ignored all the others on Tone Net, but I'll go back there soon for more. Regarding the GX, I show the input/output settings at 10:35. Thanks again, man. The TX1 presets with the adjustments I made are available in the video description. I tried adding them to Tone Net but couldn't… actually, I'm still not sure if it's even possible.
I think that's a pretty cool setup. (Btw Love the sound around 7:50). The GX100 is unfortunately an under-appreciated unit. I greatly prefer it to the gt-1000. There's so much Boss could do For and With this unit. Also, because of its super low latency it's fine to put the toneX in the S/R. You'll still should be below 5ms. The only thing I wish it had is: balanced out/xlr out.
Yes, it sounds great. The sound of the TX1 is the same as what we hear in this video with the GX-100. The HD500x doesn't alter it. I’ll do something soon. Thanks for commenting, bro!
Hello! Thanks! I keep the GX's SR volumes as they come from the factory. The GX's Global EQ is OFF. The TX1 trim is at +8.5 as it came from the factory and it works great on all my guitars, at least with these two captures I'm using. Free download of the captures I adjusted for use with the GX, link in description. 👊🔥🎸
Hi DRG, very informative video. Thanks for taking the time to do this video. May I ask, for the last patch how did you get the whammy to sound so good? Did you put it right at the start of the signal chain and what other effects are in this patch?
Hey, thanks for the comment. Yeah, at the beginning of the chain. I should share this preset here sometime. I used the TX1 in the middle of the chain, connected via SR from the GX-100. For now, this preset is for sale in the pack "Boss GX-100 patches for use with Tonex One" which contains 30 presets, link in the video description. And we also have it in the other pack "Boss GX-100 X-Ultra" where we only use the GX-100 (no external pedals) and we also have 30 presets in the Live Set. More info in the description of this video: ruclips.net/video/PiD6F75vNIk/видео.html / Thanks for your comment man!
@DirectRecordingGuitar Hi, thanks for sharing the tips. I have watched the vid. Very useful tips in it. Please keep up the great work. Hope to see more such vids from u!
Put keep are you!!!!!!! Puta timbre e puta play! Parabéns!!!!!!!!Ficou claro que ter um amp hj é como se ter um antigo maverick!! É legal, mas vc consegue excelentes resultados de uma forma mais simples e compacta!!!!
Isso mesmo man! Se o cara puder ter um bom amp e puder carregá-lo para todos os lugares ótimo! Esse é o mundo ideal. Mas, todavia, entretanto, haha vamos cair na estrada de simulações mesmo :) Obrigado por comentar cara!
Hi, I'm still in the process of getting to know the GX100 so that we can soon make fair comparisons, since I've been using the MG30 since 2021 and I already know many of its "secrets" :) ! Thanks, man! 👊🔥🎸 Noted!
Exactly! With two TX1s, we can have two amps in stereo in the PA system. But we can't have both in the SR of the Gx. I think the GT-1000 has two SRs. That way, I believe we can have both TX1s, each connected to one of the SRs, position them in parallel in the effects chain, and have two amp captures in stereo on the L and R outputs of the GTk. Thanks for your comment, bro!
Valeu man, obrigado! 👊🔥🎸 Eu ainda não parei pra explorar o Rect da GX. Venho usando muito o X-Ultra pra tudo, de low a high gain: ruclips.net/video/PiD6F75vNIk/видео.html Dei uma ignorada nos outros amps por enquanto pra focar só no X-Ultra e venho usando só a GX ao vivo desde que a peguei. Tá um sonzão em volumes altos com banda, sempre muitos elogios. Obrigado por comentar cara!
Excelente combinación de Tonex one y Gx 100, ahora una pregunta los dos archivos para descargar son los amplificadores que hay que cargar en Tonex one? o que son esos dos archivos gratis de descarga. Gracias!
Hola, son presets gratuitos que vienen de fábrica en el TX1, estos dos fueron editados por mí. El anuncio es solo para los presets de la GX-100. Gracias por comentar, amigo!
Hi, I'm also really enjoying the combo. Just like I enjoy the TX1 in the SR of the MG30, I've even made a test video. Since I got it, I've adjusted these two captures and have been using them ever since. I haven't had time to try others. Do you have any suggestions from Tonenet? If you do, just leave the names of the captures here, it will help with the 'filtering.' Thanks for your comment, man!
@DirectRecordingGuitar I'm sorry I didn't have the time to explore too much ToneNet , I did imported many but without having the time to trying it I've got many captures for bass guitar from ToneNet because I couldn't find it anywhere else For the guitar I followed a suggestion to get paid Amalgam captures and I'm stuck with those at the moment , I really like it and they do packs of 10 amps and it's not expensive, They are 20 DI presets, 2 for each amp plus IR cabs. I would say they are really good and I am still exploring those ...I mean to try 20 different amps with 2 different captures when all of them sound so good it is already overwhelming for me :) you know what I mean. I really love this pedal and the quality of the captures around
👊🔥🎸 Thanks, man! I preferred the TX1 because of its size. My focus was mainly on the captures since I already have many excellent units here for effects. However, each person has different needs. They promised a great update for Tonex and TX1 later this month that will add modulations, delay, and more to the equipament. So, you should assess what you need and choose what fits best for you. Thanks for your comment, bro!
I had this same thought and went tonex1 and so glad I did. Once you master it, you realise that it's a VERY clever setup, and you can switch between 20 amps with a few clicks on the pedal. In reality once you have 2 ot 3 amps you won't be switching around at gigs. I would never change 4 physical amps on stage. Plus there is still all the Boss amps and dual amping - phew. GX100 and Tonex1 is my favourite setups in years. But as above consider if you want on the fly button switching of many amps. If so the full tonex may be better.
@@steved1099 Usually, in live shows, I get all the tones I need from just one amp. With the TX1/GX combo, it’s the Dumble. I really like Robben Ford’s sound and use it as a reference. I only activate the Rect from the TX1 once or twice, and that’s just because I have the option right in front of me. For the setlists I play at night gigs, I can leave the TX1 fixed on Dumble and get everything else from the GX. I’ve been using it the same way with the TX1/MG30 combo from Nux, and it sounds great. Plus, the pedalboard is smaller than when using the GX. :) ruclips.net/video/I8JVqXurN4o/видео.html
@DirectRecordingGuitar exactly the same as me... big robben Ford fan, dumble all the way on the tonex, for me sounds better than the Boss amps. it's the only one I use, then spice up with ODs or modulation from the GX100.
Fala cara! Eu venho usando a GX sozinha desde que a peguei. Para drives tanto low quanto high gain venho usando o amp X-Ultra, compartilhei um dos presets que uso neste vídeo: ruclips.net/video/PiD6F75vNIk/видео.html Gosto muito deste amp. Sobre o combo com o TX1, eu usei no último final de semana exatamente como está no vídeo e foi muito bom também. Eu tenho meu preset principal na GX e o TX1 no canal clean (Dumble). Piso no CTL1 e tenho um "clean solo" com delay, reverb, etc... Se eu precisar de um drive, apenas piso no TX1 e já tenho esse Rect do vídeo. Se o CTL1 da GX estiver off eu tenho um drive pra riffs, se eu ativo o CTL1 eu tenho um drive pra solos. No CTL2 eu tenho um Tap Tempo delay e o tuner da GX está no próprio número referente ao preset que estou usando. Tanto faz se está no footswitch 1, 2, 3 ou 4 da GX. Se eu precisar de outro preset como um chorus, tremolo, harmonist basta configurar tudo e salvá-lo ao lado do preset principal. Eu só uso dois bancos na GX. São 8 presets e ao vivo passo a maioria do tempo no preset principal. Só saio dele em algumas músicas específicas. Nunca usei a MX5, não posso opinar mas usei o TX1 com a MG-30 e ficou excelente também, dá uma olhada: ruclips.net/video/I8JVqXurN4o/видео.html / Abração cara! Obrigado por comentar!
Por nada cara. Qualquer coisa só perguntar por aqui. Sobre a conexão, sim pelo send/return da GX. Eu deixei um diagrama que aparece durante o vídeo e lá no final aparece grande na tela. Abração.
Hi Derick! The GX-100 is using its original Boss power supply, and the TX1 is using a Nux power supply from the MG-30. As I showed in the diagram in the video, the TX1 is connected via send/return on the GX-100. I don't have the GX-10, so I can't say anything about it until I have one in my hands and can explore it. Thanks for commenting, man! 👊🔥🎸
Fala cara. Não. Tx1 é o amp e a gente vai escolhendo usar o canal limpo ou o canal sujo. Ele tá conectado pelo send/return da GX que nesse caso, trabalha como uma plataforma de efeitos como comp, modulações, tuner, delay, reverb, wah, whammy, etc... É uma opção pra poder usar captures com a Gx. Abração. Obrigado por comentar bro!
Hello, these are factory presets that I edited the gain levels, EQ, and turned off the NG and reverb since I'm using those effects from the GX-100. The two presets for the TX1 are available for free download in the video description. Only the GX-100 patches are for sale. Thanks for commenting, man!
Thanks for doing this demo I think it sounds huge!!! Nice 👍🏻 job...may I ask your signal chain other than the boss and tone x of course. I assume you just put it in the loop and simply made a fx return block ....💯
Anytime, dude! I’m the one who should thank you for your comment. The signal chain appears throughout the video because I show the Boss Tone Studio on screen and alternate with the Tonex program. In the first image of the video, you can already see the signal chain of the preset used for the riff and then for the solo. 👊🔥🎸
A pair of Nux PA50 FRFR monitors is used during preset programming, and once they're ready, I test them on Yamaha HS5 monitors and JBL 1000 RMS PA-style speakers at high volumes, similar to live show conditions. Before making the video, I test all the presets I share here during weekend band gigs to experience how they interact with other instruments at high volumes through the PA. At this point, I make fine adjustments during the sound check. Only then are they ready to be shared here. :) I only use headphones to record what will be used in the videos. Thanks for commenting, man! Nux PA50 RUclips Playlist: ruclips.net/p/PLrxXQYEp-_uhwQuzX3QpiFtKGU0I9rLdr
Hi, I didn’t change the values on that. I left it as it comes from the factory. I just connected the TX1 and adjusted the presets on both so they would match. I even left the TX1’s trim as it comes from the factory, and it works great with all my guitars, whether it’s SSS, HSS, or HH. Thanks for commenting, man!
Im using gt1k and tonex pedal on send return bkinthe sound is thin and lacks body when platying live. So ive kept on using my gt1k instead. Still keeping my hopes high for my tonex though. Lol any suggestions? Btw im using studio rats packs so without tweaking it should sound good. Right? Hahah
Hi, the Tonex One presets are free in the video description. They are free factory captures that I edited to use with the GX-100. I hope you like them!
Hi! I’ve never had the GTk in my hands, but I believe so because I tested it in the loop of the GT-100, Nux MG30, and HD500x, and the result was identical to the GX/TX1 combo. :) Thanks for commenting, man. The MG30/TX1 is already on the channel: ruclips.net/video/I8JVqXurN4o/видео.html
Yeah, what's shown on the bottom of the screen occasionally looks a lot like the Boss Tone Studio i was talking about on one of your other posts. I found it to be pretty useless. Literally everything I could do with the Tone Studio, I could also do with the amplifier without the Tone Studio software. It was also much easier to dial in the sounds I wanted using the knobs on the amp than it was trying to fool with all that stuff on a computer screen. There are supposed to be "patches" or whatever they're called, of other people's tones you can get, but I could only find, like, literally just one or two, & didn't like them at all. I followed directions on every video & forum post I read on how to get some of those tones but they're nowhere to be found.
Unfortunately, I don't have a Katana amp. If I did, I would share my findings here. I’ve heard that the latest models even support Impulse Responses. I hope you’re able to adjust it to sound great for you. Thanks for commenting, man! *Edit: I suggested to you about the settings in this video, the parametric EQ used in the X-Ultra preset. I demonstrate the settings throughout the video: ruclips.net/video/PiD6F75vNIk/видео.html
Hello my friend, unfortunately, I don’t know anything about this company. I’ve never had any of their products in my hands for evaluation. Thanks for commenting, bro!
Estava aguardando este video com esta combinação! Excelente
Valeu Leonardo, obrigado cara. Farei outros em breve!
Great video. I'm happy to see you using the ToneX One with the GX-100. I've been using the ToneX pedal with the GX-100 for about 18 months now and I love this combo. Out of curiosity what is your input sensitivity on the GX-100 and input trim setting on the ToneX One? My settings are +5 and +1 respectively. I'm looking forward to more videos.
Hey man, thanks for commenting. I kept the global settings of both as they came from the factory. At least these two captures I use on the TX1 sound really good with all my guitars. I adjusted the drive levels on both captures since the Rect was too intense and muddy, so I kept it around 10 to 11 o'clock. The Dumble wasn't clean, so I cleared it up by reducing the drive, adjusted volume, EQ, turned off the NR, Rect's comp, and reverb. Maybe these adjustments offset the +8.5 on the Trim. I'm really enjoying these two captures, and for now, I've ignored all the others on Tone Net, but I'll go back there soon for more. Regarding the GX, I show the input/output settings at 10:35. Thanks again, man. The TX1 presets with the adjustments I made are available in the video description. I tried adding them to Tone Net but couldn't… actually, I'm still not sure if it's even possible.
I think that's a pretty cool setup. (Btw Love the sound around 7:50). The GX100 is unfortunately an under-appreciated unit. I greatly prefer it to the gt-1000. There's so much Boss could do For and With this unit. Also, because of its super low latency it's fine to put the toneX in the S/R. You'll still should be below 5ms. The only thing I wish it had is: balanced out/xlr out.
Grande video, mestre dos timbres. 👍
Que bom que gostou cara! Muito obrigado por comentar! 👊🔥🎸
Sounds Great by the way!
Thanks man!
This is exactly what i thought of doing to "upgrade" my hd500x. Should be getting it close to the helix sound quality using this method
Yes, it sounds great. The sound of the TX1 is the same as what we hear in this video with the GX-100. The HD500x doesn't alter it. I’ll do something soon. Thanks for commenting, bro!
Top 👏👏👏👏
👊🔥🎸
Nice demo.. This is what I am thinking of doing..
Thanks, bro! 👊🔥🎸
Nice demo. It's the exactly what a I want to do.
Thanks, man! 👊🔥🎸
great video thats my set up right now, just a question what levels do you have the send and return in the gx 100?
Hello! Thanks! I keep the GX's SR volumes as they come from the factory. The GX's Global EQ is OFF. The TX1 trim is at +8.5 as it came from the factory and it works great on all my guitars, at least with these two captures I'm using. Free download of the captures I adjusted for use with the GX, link in description. 👊🔥🎸
Real shame the Tonex One does not directly support Midi commands so it would be easy to control from a floor modeler. Great tones though as always!
Thanks, man! 👊🔥🎸
Hi DRG, very informative video. Thanks for taking the time to do this video. May I ask, for the last patch how did you get the whammy to sound so good? Did you put it right at the start of the signal chain and what other effects are in this patch?
Hey, thanks for the comment. Yeah, at the beginning of the chain. I should share this preset here sometime. I used the TX1 in the middle of the chain, connected via SR from the GX-100. For now, this preset is for sale in the pack "Boss GX-100 patches for use with Tonex One" which contains 30 presets, link in the video description. And we also have it in the other pack "Boss GX-100 X-Ultra" where we only use the GX-100 (no external pedals) and we also have 30 presets in the Live Set. More info in the description of this video: ruclips.net/video/PiD6F75vNIk/видео.html / Thanks for your comment man!
@DirectRecordingGuitar Hi, thanks for sharing the tips. I have watched the vid. Very useful tips in it. Please keep up the great work. Hope to see more such vids from u!
Put keep are you!!!!!!! Puta timbre e puta play! Parabéns!!!!!!!!Ficou claro que ter um amp hj é como se ter um antigo maverick!! É legal, mas vc consegue excelentes resultados de uma forma mais simples e compacta!!!!
Isso mesmo man! Se o cara puder ter um bom amp e puder carregá-lo para todos os lugares ótimo! Esse é o mundo ideal. Mas, todavia, entretanto, haha vamos cair na estrada de simulações mesmo :) Obrigado por comentar cara!
Awesome tones...
Thanks, bro! 👊🔥🎸
@@DirectRecordingGuitar Most welcome... 👊🔥🎸🤘
would be great to see comparison between GX100 and MG30
Hi, I'm still in the process of getting to know the GX100 so that we can soon make fair comparisons, since I've been using the MG30 since 2021 and I already know many of its "secrets" :) ! Thanks, man! 👊🔥🎸 Noted!
Great video! Hey can you make a zoom g1 tone preset in a music called bulong? Jem Manuel's tone? For the chorus section. If so thanks!
Thanks bro! Noted!
Cool man!! ….. Please GT100 + tonex one 🙌🏻
Yeah! :) Noted bro! Thanks!
This sounds fantastic to me, is a helix able to really sound better. Great to be a guitarist today.
Thanks for commenting, man! 👊🔥🎸
Run 2 for dual rigs! I wish the TonexOne has MIDI, then it would be perfect for setups like this.
Exactly! With two TX1s, we can have two amps in stereo in the PA system. But we can't have both in the SR of the Gx. I think the GT-1000 has two SRs. That way, I believe we can have both TX1s, each connected to one of the SRs, position them in parallel in the effects chain, and have two amp captures in stereo on the L and R outputs of the GTk. Thanks for your comment, bro!
Show. 👏🏻👏🏻👏🏻
👊🔥🎸 Valeu André! Obrigado por comentar man!
Parabéns pelo vídeo. Por favor, sem usar o pedal adicional, a gx100 é capaz de chegar nesses timbres? Vi que usou o rect e a gx100 tbm possui ele...
Valeu man, obrigado! 👊🔥🎸 Eu ainda não parei pra explorar o Rect da GX. Venho usando muito o X-Ultra pra tudo, de low a high gain: ruclips.net/video/PiD6F75vNIk/видео.html Dei uma ignorada nos outros amps por enquanto pra focar só no X-Ultra e venho usando só a GX ao vivo desde que a peguei. Tá um sonzão em volumes altos com banda, sempre muitos elogios. Obrigado por comentar cara!
Excelente combinación de Tonex one y Gx 100, ahora una pregunta los dos archivos para descargar son los amplificadores que hay que cargar en Tonex one? o que son esos dos archivos gratis de descarga. Gracias!
Hola, son presets gratuitos que vienen de fábrica en el TX1, estos dos fueron editados por mí. El anuncio es solo para los presets de la GX-100. Gracias por comentar, amigo!
@@DirectRecordingGuitar entonces puedo cargar estos dos que editaste en mi TX1?
Sí! Si te gustó puedes.
Muy bueno hno. Gracias
👊🔥🎸
👏👏👏👌
👊🔥🎸
I'm using the Tonex One with GX-100 as well , the full tonex has midi but who cares, in setting mode we have 3 captures to switch ...it's enough!
Hi, I'm also really enjoying the combo. Just like I enjoy the TX1 in the SR of the MG30, I've even made a test video. Since I got it, I've adjusted these two captures and have been using them ever since. I haven't had time to try others. Do you have any suggestions from Tonenet? If you do, just leave the names of the captures here, it will help with the 'filtering.' Thanks for your comment, man!
@DirectRecordingGuitar I'm sorry I didn't have the time to explore too much ToneNet , I did imported many but without having the time to trying it
I've got many captures for bass guitar from ToneNet because I couldn't find it anywhere else
For the guitar I followed a suggestion to get paid Amalgam captures and I'm stuck with those at the moment ,
I really like it and they do packs of 10 amps and it's not expensive,
They are 20 DI presets, 2 for each amp plus IR cabs.
I would say they are really good and I am still exploring those ...I mean to try 20 different amps with 2 different captures when all of them sound so good it is already overwhelming for me :) you know what I mean.
I really love this pedal and the quality of the captures around
Sounds great! I have the GX100 and am looking into the tonex, should I get the ToneX one or ToneX Pedal?
👊🔥🎸 Thanks, man! I preferred the TX1 because of its size. My focus was mainly on the captures since I already have many excellent units here for effects. However, each person has different needs. They promised a great update for Tonex and TX1 later this month that will add modulations, delay, and more to the equipament. So, you should assess what you need and choose what fits best for you. Thanks for your comment, bro!
I had this same thought and went tonex1 and so glad I did. Once you master it, you realise that it's a VERY clever setup, and you can switch between 20 amps with a few clicks on the pedal. In reality once you have 2 ot 3 amps you won't be switching around at gigs. I would never change 4 physical amps on stage. Plus there is still all the Boss amps and dual amping - phew. GX100 and Tonex1 is my favourite setups in years. But as above consider if you want on the fly button switching of many amps. If so the full tonex may be better.
@@steved1099 Usually, in live shows, I get all the tones I need from just one amp. With the TX1/GX combo, it’s the Dumble. I really like Robben Ford’s sound and use it as a reference. I only activate the Rect from the TX1 once or twice, and that’s just because I have the option right in front of me. For the setlists I play at night gigs, I can leave the TX1 fixed on Dumble and get everything else from the GX. I’ve been using it the same way with the TX1/MG30 combo from Nux, and it sounds great. Plus, the pedalboard is smaller than when using the GX. :) ruclips.net/video/I8JVqXurN4o/видео.html
@DirectRecordingGuitar exactly the same as me... big robben Ford fan, dumble all the way on the tonex, for me sounds better than the Boss amps. it's the only one I use, then spice up with ODs or modulation from the GX100.
@@steved1099 I'm doing the same thing on a pedal set as well. The TX1 Rect is the most requested one here. :)
meu amigo o tonex tá ligado no send return ??
como vc usa ao vivo ??
tambem tava pensando em
Tonex one + GX10 ou ToneX one + MX5
Fala cara! Eu venho usando a GX sozinha desde que a peguei. Para drives tanto low quanto high gain venho usando o amp X-Ultra, compartilhei um dos presets que uso neste vídeo: ruclips.net/video/PiD6F75vNIk/видео.html Gosto muito deste amp. Sobre o combo com o TX1, eu usei no último final de semana exatamente como está no vídeo e foi muito bom também. Eu tenho meu preset principal na GX e o TX1 no canal clean (Dumble). Piso no CTL1 e tenho um "clean solo" com delay, reverb, etc... Se eu precisar de um drive, apenas piso no TX1 e já tenho esse Rect do vídeo. Se o CTL1 da GX estiver off eu tenho um drive pra riffs, se eu ativo o CTL1 eu tenho um drive pra solos. No CTL2 eu tenho um Tap Tempo delay e o tuner da GX está no próprio número referente ao preset que estou usando. Tanto faz se está no footswitch 1, 2, 3 ou 4 da GX. Se eu precisar de outro preset como um chorus, tremolo, harmonist basta configurar tudo e salvá-lo ao lado do preset principal. Eu só uso dois bancos na GX. São 8 presets e ao vivo passo a maioria do tempo no preset principal. Só saio dele em algumas músicas específicas. Nunca usei a MX5, não posso opinar mas usei o TX1 com a MG-30 e ficou excelente também, dá uma olhada: ruclips.net/video/I8JVqXurN4o/видео.html / Abração cara! Obrigado por comentar!
@@DirectRecordingGuitar muito obrigado pelo retorno!!
Por nada cara. Qualquer coisa só perguntar por aqui. Sobre a conexão, sim pelo send/return da GX. Eu deixei um diagrama que aparece durante o vídeo e lá no final aparece grande na tela. Abração.
@@DirectRecordingGuitar shoow!! Agora to no aguardo de videos com trimbes da GX100 pra eu copiar no futuro, haha
Vai rolar! :) É um excelente multi-efeitos.
nice demo,could u do a nux mg300 eric johnson cliffs of dover tone?
Thanks for commenting, man! 👊🔥🎸 Noted!
Did you daisy chain Tonex? How can I use type c midi on my Boss GX-10 with tonex?
Hi Derick! The GX-100 is using its original Boss power supply, and the TX1 is using a Nux power supply from the MG-30. As I showed in the diagram in the video, the TX1 is connected via send/return on the GX-100. I don't have the GX-10, so I can't say anything about it until I have one in my hands and can explore it. Thanks for commenting, man! 👊🔥🎸
Meu amigo, a pedeira ta controlando o tonex ? Via cabo ?
Fala cara. Não. Tx1 é o amp e a gente vai escolhendo usar o canal limpo ou o canal sujo. Ele tá conectado pelo send/return da GX que nesse caso, trabalha como uma plataforma de efeitos como comp, modulações, tuner, delay, reverb, wah, whammy, etc... É uma opção pra poder usar captures com a Gx. Abração. Obrigado por comentar bro!
Cool
Thanks! 👊🔥🎸
Do the tonex settings come in the package? Or are they his factory settings? Thank you.
Hello, these are factory presets that I edited the gain levels, EQ, and turned off the NG and reverb since I'm using those effects from the GX-100. The two presets for the TX1 are available for free download in the video description. Only the GX-100 patches are for sale. Thanks for commenting, man!
Thanks for doing this demo I think it sounds huge!!! Nice 👍🏻 job...may I ask your signal chain other than the boss and tone x of course. I assume you just put it in the loop and simply made a fx return block ....💯
Anytime, dude! I’m the one who should thank you for your comment. The signal chain appears throughout the video because I show the Boss Tone Studio on screen and alternate with the Tonex program. In the first image of the video, you can already see the signal chain of the preset used for the riff and then for the solo. 👊🔥🎸
@DirectRecordingGuitar I meant your sound...lol sorry ...speakers , cabs, or FRFR?
A pair of Nux PA50 FRFR monitors is used during preset programming, and once they're ready, I test them on Yamaha HS5 monitors and JBL 1000 RMS PA-style speakers at high volumes, similar to live show conditions. Before making the video, I test all the presets I share here during weekend band gigs to experience how they interact with other instruments at high volumes through the PA. At this point, I make fine adjustments during the sound check. Only then are they ready to be shared here. :) I only use headphones to record what will be used in the videos. Thanks for commenting, man! Nux PA50 RUclips Playlist: ruclips.net/p/PLrxXQYEp-_uhwQuzX3QpiFtKGU0I9rLdr
Hey. What level do you set on input/ouput in the loop?
Hi, I didn’t change the values on that. I left it as it comes from the factory. I just connected the TX1 and adjusted the presets on both so they would match. I even left the TX1’s trim as it comes from the factory, and it works great with all my guitars, whether it’s SSS, HSS, or HH. Thanks for commenting, man!
Im using gt1k and tonex pedal on send return bkinthe sound is thin and lacks body when platying live. So ive kept on using my gt1k instead. Still keeping my hopes high for my tonex though. Lol any suggestions? Btw im using studio rats packs so without tweaking it should sound good. Right? Hahah
Hi, the Tonex One presets are free in the video description. They are free factory captures that I edited to use with the GX-100. I hope you like them!
Will this work on gt1k?
Hi! I’ve never had the GTk in my hands, but I believe so because I tested it in the loop of the GT-100, Nux MG30, and HD500x, and the result was identical to the GX/TX1 combo. :) Thanks for commenting, man. The MG30/TX1 is already on the channel: ruclips.net/video/I8JVqXurN4o/видео.html
Yeah, what's shown on the bottom of the screen occasionally looks a lot like the Boss Tone Studio i was talking about on one of your other posts. I found it to be pretty useless. Literally everything I could do with the Tone Studio, I could also do with the amplifier without the Tone Studio software.
It was also much easier to dial in the sounds I wanted using the knobs on the amp than it was trying to fool with all that stuff on a computer screen.
There are supposed to be "patches" or whatever they're called, of other people's tones you can get, but I could only find, like, literally just one or two, & didn't like them at all.
I followed directions on every video & forum post I read on how to get some of those tones but they're nowhere to be found.
Unfortunately, I don't have a Katana amp. If I did, I would share my findings here. I’ve heard that the latest models even support Impulse Responses. I hope you’re able to adjust it to sound great for you. Thanks for commenting, man! *Edit: I suggested to you about the settings in this video, the parametric EQ used in the X-Ultra preset. I demonstrate the settings throughout the video: ruclips.net/video/PiD6F75vNIk/видео.html
Please tweaking valeton gp 100
Hello my friend, unfortunately, I don’t know anything about this company. I’ve never had any of their products in my hands for evaluation. Thanks for commenting, bro!