I love it. I bought the same trailer on offer up for $150. I did upgrade to load range C tires for more durability, spray painted it black, installed an LED light kit, added a piece of plywood and treated it to waterproof it, added a tool box on either side to store straps and accessories, eye bolts in multiple locations for anchor points, and added 2 runners since all I haul is 1 predator PDL. Super lightweight and looks awesome. With that set up I can park close to the boat ramp and not have to park 1/4 mile away because of the trailer parking only. Also makes loading and unloading a breeze since I can back up into the water
Cool to find your channel. I live here in Navarre as well. :) Building a kayak with trolling motor etc. over the winter and Trailer is going to be next project so I can fish Milton, PCola, etc. I'll see ya out on the water!
Can you add measurements. How long are the boards that run left to right. How long are the 2x4 under the PVC. What size bolt and washers did you use to hold pvc on 2x4. How big of hole saw on the top hole
I had my first one for almost 10yrs. Hauled piles of rock, cinder blocks, sod, you name it. Pulled it from AZ to TX and then from TX to FL full of stuff and never had a tire problem. Just bought the new one at the Harbor Freight in FWB a couple months ago, so I guess they are selling them again if you can find them in stock.
You used regular wood screws to fasten the cross bars into the 2x4's that are in the stake pockets, right? How about to secure the stake pocket 2x4's to the trailer frame? Same bolts and washers as everything else? You used the same type of bolts on the pvc as you did the 2x4's? I heard you say pilot bolts but not much came up when I googled that.
Thomas, I did just use regular wood screws. Nothing fancy. When I said pilot bolts I just used 4” bolts and washers. Same bolts everywhere. Nothing fancy.
Love it Nick. I went with 4” as well. Only real difference is mine are spaced 15” on center. I’ll have to get those end caps though, I like how they caught the outer line even when you pitched the kayak low. Nice vid bud. 🎣
The end caps make it really easy to load the kayaks. My approach angle was terrible and it still worked without any issues. I didn’t think to move the chair lol
converted a jet ski trailer for a single kayak. removed the wood bunks and replaced with pvc to fit my first kayak which was a f&s shadow caster. just ordered a sportsman pdl120, hopefully will just have to adjust my bunks when it come in. how do you tie yours down? I used a ratchet strap but was scared of putting too much tension and warping the hull so I ended up not using enough tension and the strap jumped off and I drug the SC down the highway about a half mile before realizing it
The 17 in center to center would work for old town sportsman pdl 120 ? just recently purchased 2 kayaks for the wife and myself and I’m building a trailer . Love the channel and have already ordered some of your products ! Salutations 🙌
Awesome video thanks! How does it handle with only one kayak on it? I might need to set up one set of tubes in the center or mount a box on the opposite side until we get one for the wife....
Nick, can you do a video on your way of securing the yaks to the truck, without a trailer? I brought mine out last week and I was really struggling on how to secure it without breaking handles and such. I have the Vibe Sea Ghost 130 most of the handles are rubberery and move. I have the same trailer as you and I did mine the same way as you. But I am not always taking all of the kayaks, so I can throw it into the bed of my Silverado and go! Great vid as always
Can you turn as sharp as you want with it like this? Im ready to add the runners/pvc and trying to figure out how far I can extend them past the 4x8 frame before I start have a problem. Ive been using this to haul the predator xl mk but it's been in the center. Now I'll have the xl mk and a pdl 120. About how far do yours extend from the frame? Really worried about backing up and letting it turn too sharp without noticing.
Sure am glad I saw this, I have the same trailer rigged up for one 2016 predator xl mk with one pair of pvc in the middle. I just ordered a sportsman 120 pdl, should I move the pvc to one side and put a sheet of ply down for the sportsman? What do you suggest? How about when I venture out on my own, could having one kayak to the side cause problems?
Thomas, we use the trailers all of the time with just one kayak on them. The 120 would do good on a flat surface and I think the plywood is a good idea.
I drilled holes through the pvc and wood then used a bolt/washer on top and washer/nut on the bottom to secure it. I used a hole saw bit to make the hole on top of the pvc larger so I can easily push the bolt through the bottom of the pvc and wood.
Great video Nick. I've looked at several other designs using the Harbor Freight trailer and yours is the simplest (and probably cheapest) of any of the others I saw. How is the tongue length on the trailer with the length of the Predator? Do you feel it is too short or no problem the way it is? Just ordered 2 Sportsman Bigwater PDL yesterday so going to Harbor Freight today to get started on the trailer.
I think the tongue length is great. It will cause some issues backing the trailer in initially. Once you get use to it you won’t have any issues though. The short tongue makes it possible for me to store the kayaks in the garage and that was my goal from the start.
@@NavarreKayakFishing ok thank you. I just bought one today and I was wondering how far my kayaks were going to stick out in the front and back. My kayaks are 12' 5"
Now I know why I can't get a trailer from Harbor Freight. I have a coupon that I've been having to go to H.F. to get a raincheck on. Maybe I'll go up to GA to pick one up.
@@NavarreKayakFishing I get the low budget build concept and everything. One of the reason why I am watching these videos. I no lawyer, but you telling people these “loophole” like removing vin numbers, your experience driving over 80mph on 45 or so rated tires have encountered no problems may be good and dandy when thing are fine, but it will catch up with you. When it catch up with you, people may get hurt. And if that vin is just a stamped piece of placard, then why remove it.
The tires are rated for 45MPH with a full load. (I think it’s 1500 lbs) If it’s not for you it’s not for you. It may not be legal where you live. Good luck in your trailer search.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
I love it. I bought the same trailer on offer up for $150. I did upgrade to load range C tires for more durability, spray painted it black, installed an LED light kit, added a piece of plywood and treated it to waterproof it, added a tool box on either side to store straps and accessories, eye bolts in multiple locations for anchor points, and added 2 runners since all I haul is 1 predator PDL. Super lightweight and looks awesome. With that set up I can park close to the boat ramp and not have to park 1/4 mile away because of the trailer parking only. Also makes loading and unloading a breeze since I can back up into the water
They tow well and fit just about anywhere. I should probably sand and re-paint mine sometime!
Wow, just seeing this. You & I talked about this after our fishing trip, love it
Cool to find your channel. I live here in Navarre as well. :) Building a kayak with trolling motor etc. over the winter and Trailer is going to be next project so I can fish Milton, PCola, etc. I'll see ya out on the water!
Awesome job.
Thanks for sharing the idea.
This is perfect.
Hey Nick, What length PVC did you use?
Thank You for the info.
Thanks for watching.
Can you add measurements. How long are the boards that run left to right. How long are the 2x4 under the PVC. What size bolt and washers did you use to hold pvc on 2x4. How big of hole saw on the top hole
I had my first one for almost 10yrs. Hauled piles of rock, cinder blocks, sod, you name it. Pulled it from AZ to TX and then from TX to FL full of stuff and never had a tire problem. Just bought the new one at the Harbor Freight in FWB a couple months ago, so I guess they are selling them again if you can find them in stock.
That’s good to know!
I just bought one in Panama City yesterday. Got it home and it's missing the tongue pieces lol. Can't wait to get it rigged just like this one!
Hahaha! That’s terrible. I’m sure they will work it out though.
You used regular wood screws to fasten the cross bars into the 2x4's that are in the stake pockets, right? How about to secure the stake pocket 2x4's to the trailer frame? Same bolts and washers as everything else? You used the same type of bolts on the pvc as you did the 2x4's? I heard you say pilot bolts but not much came up when I googled that.
Thomas, I did just use regular wood screws. Nothing fancy. When I said pilot bolts I just used 4” bolts and washers. Same bolts everywhere. Nothing fancy.
Love it Nick. I went with 4” as well. Only real difference is mine are spaced 15” on center. I’ll have to get those end caps though, I like how they caught the outer line even when you pitched the kayak low. Nice vid bud. 🎣
The end caps make it really easy to load the kayaks. My approach angle was terrible and it still worked without any issues. I didn’t think to move the chair lol
Thanks for the info . I have a Big Fish 108 pedal kayak. Weights 110 lbs . Waiting for a coupon here in Venice Florida
Love the video! If you are only taking one kayak (Old Town 106MK), will it fit in the middle?
You would need to adjust the spacing a bit but you should be able to make it happen.
converted a jet ski trailer for a single kayak. removed the wood bunks and replaced with pvc to fit my first kayak which was a f&s shadow caster. just ordered a sportsman pdl120, hopefully will just have to adjust my bunks when it come in. how do you tie yours down? I used a ratchet strap but was scared of putting too much tension and warping the hull so I ended up not using enough tension and the strap jumped off and I drug the SC down the highway about a half mile before realizing it
The 17 in center to center would work for old town sportsman pdl 120 ? just recently purchased 2 kayaks for the wife and myself and I’m building a trailer . Love the channel and have already ordered some of your products ! Salutations 🙌
Chris, I’m not sure which measurements you would need for the 120. The hulls are a bit different.
Awesome video thanks! How does it handle with only one kayak on it? I might need to set up one set of tubes in the center or mount a box on the opposite side until we get one for the wife....
Ken, the trailer handles great with only one kayak on it.
What is the spacing (center to center) between the two center pvc runners?
Scott S center to center its 25” which gives you about 4” between two Predator PDL’s
Much appreciated!
No problem, sir. Thanks for watching.
Nick, can you do a video on your way of securing the yaks to the truck, without a trailer? I brought mine out last week and I was really struggling on how to secure it without breaking handles and such. I have the Vibe Sea Ghost 130 most of the handles are rubberery and move. I have the same trailer as you and I did mine the same way as you. But I am not always taking all of the kayaks, so I can throw it into the bed of my Silverado and go! Great vid as always
Super simple stuff. I will make a video on it tomorrow morning!
May be a bit late but the local harbor freight in Pensacola are selling the collapsible trailers again
That’s good to know.
Can you turn as sharp as you want with it like this? Im ready to add the runners/pvc and trying to figure out how far I can extend them past the 4x8 frame before I start have a problem. Ive been using this to haul the predator xl mk but it's been in the center. Now I'll have the xl mk and a pdl 120. About how far do yours extend from the frame? Really worried about backing up and letting it turn too sharp without noticing.
I can turn as sharp as I want but I’m sure every vehicle is a bit different.
Do you dunk this trailer in salt water to launch and retrieve?
Never. We don’t often fish anywhere that has a boat ramp.
@@NavarreKayakFishing Thank you!! You guys are the best!
Thanks for the kind words.
Sure am glad I saw this, I have the same trailer rigged up for one 2016 predator xl mk with one pair of pvc in the middle. I just ordered a sportsman 120 pdl, should I move the pvc to one side and put a sheet of ply down for the sportsman? What do you suggest? How about when I venture out on my own, could having one kayak to the side cause problems?
Thomas, we use the trailers all of the time with just one kayak on them. The 120 would do good on a flat surface and I think the plywood is a good idea.
How do you attach the PVC to the wood supports?
I drilled holes through the pvc and wood then used a bolt/washer on top and washer/nut on the bottom to secure it.
I used a hole saw bit to make the hole on top of the pvc larger so I can easily push the bolt through the bottom of the pvc and wood.
@@NavarreKayakFishing Thanks Nick!
You’re welcome. Let me know if you have any questions.
What brand and we’re did you get those wheels?
Great video Nick. I've looked at several other designs using the Harbor Freight trailer and yours is the simplest (and probably cheapest) of any of the others I saw. How is the tongue length on the trailer with the length of the Predator? Do you feel it is too short or no problem the way it is? Just ordered 2 Sportsman Bigwater PDL yesterday so going to Harbor Freight today to get started on the trailer.
I think the tongue length is great. It will cause some issues backing the trailer in initially. Once you get use to it you won’t have any issues though. The short tongue makes it possible for me to store the kayaks in the garage and that was my goal from the start.
what length are the kayaks for the dimensions of your trailer?
or you can just move to South Carolina where you don't have to register a trailer....lol. Another awesome video brother. 😎🤙
Now that’s a solid reason to live in South Carolina!
I never knew this video existed 😁
Thumbnail has five predators in it! Lol
@@NavarreKayakFishing sure does! That’s what drew me to the video while scrolling 😂
How windy is it?
Matt Updegrave very windy.
Guess you could stick some fishing rods INSIDE the PVC pipes? Nice!!
✌🏻
What size is your trailer?
It’s 4’ x 8’.
@@NavarreKayakFishing ok thank you. I just bought one today and I was wondering how far my kayaks were going to stick out in the front and back. My kayaks are 12' 5"
Awesome job.
Now I know why I can't get a trailer from Harbor Freight. I have a coupon that I've been having to go to H.F. to get a raincheck on. Maybe I'll go up to GA to pick one up.
Those trailers do a good job.
illegal as 💩. It good until you hurt someone.
What’s illegal?
@@NavarreKayakFishing removing the vin
What does removing a piece of 2mm thick metal with a stamp on it have to do with hurting someone? The trailer is still registered.
@@NavarreKayakFishing I get the low budget build concept and everything. One of the reason why I am watching these videos. I no lawyer, but you telling people these “loophole” like removing vin numbers, your experience driving over 80mph on 45 or so rated tires have encountered no problems may be good and dandy when thing are fine, but it will catch up with you. When it catch up with you, people may get hurt. And if that vin is just a stamped piece of placard, then why remove it.
The tires are rated for 45MPH with a full load. (I think it’s 1500 lbs)
If it’s not for you it’s not for you.
It may not be legal where you live.
Good luck in your trailer search.