How to Replace Air Intake Hose 2007 - 2012 Nissan Sentra
HTML-код
- Опубликовано: 4 авг 2024
- Buy Now!
New Air Intake Hose from 1AAuto.com 1aau.to/ia/1AEIH00086
This video shows you how to install a new air intake hose in your 2007-2012 Nissan Sentra.
• Check here for more videos on the 2007-2013 Nissan Sentra: • Nissan Sentra 2007-2012
This process should be similar on the following vehicles:
2007 Nissan Sentra
2008 Nissan Sentra
2009 Nissan Sentra
2010 Nissan Sentra
2011 Nissan Sentra
2012 Nissan Sentra
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Trim Tool Set 1aau.to/oa/1AXXX00006
• Pliers
Subscribe: / @trq
Check out our playlist:
Nissan Sentra 2007-2012: • Nissan Sentra 2007-2012
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. Авто/Мото
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
Will it fit for 2007 spec v?
Just got replaced the air intake exactly as you showed it in your video. Booom 😄😄😄 it worked out for me 🎉🎉🎉… thank you very much. God bless you my brother.. 👍👍🤝🤝
Right to the point and good instructions. thank you!. My sentra has a tear in the hose i discovered, which i think explains the hesitation while backing up and also the stalling when i start it and also occasionally while driving the traction and vdc light comes on and the car will jerk while trying to accelerate. Hopefully this tear in the hose is the reason because it's a cheaper fix rather than a new sensor or injector which would be way more pricey.
What was the first hose for ? It didn't look connected to anything is it supposed to be like that?
Thank you. I originally thought it was my Mass Air Flow Sensor (maybe it was a part of it), but I replace that. Still had stalling/shut down when I came to a stop and would have to restart the car. I looked at my Air Intake Hose and I discovered a huge crack.
Really easy thanks
Whats that second hose you took off? Mine is brittle and would like to replace it.
Do you have a video for the 2008 Altima?
I’m missing that squeeze clamp in the beginning, do you know the specific name for it so I can narrow down my parts search?
Is this will fit for 2007 spec v?
What’s the hard plastic curled tube on top ? It popped off on my nieces car ,can it just be reattached ?or should the whole thing be replaced
The smaller U shaped pipe that is attached to this air intake hose, can you tell me what it is called and how I can get one? Thanks
Is a 2.0 air intake hose compatible with a 2.5 Nissan Sentra 2012?
will this cause a p0101 code?
Would this part cause the engine to stall when it needs replacement?
Possibly. My girlfriends car almost broke down on her last night, RPMs were going crazy and wasn't accelerating. Had p0101 code which is MAF circuit.. so went to clean the sensor (still did just because) but noticed her intake hose is completely cracked between one of the ribs.. so id say its very possible as Im certain thats whats causing her problem.
It would've been helpful if you gave some kind of advice for getting the right side of the hose installed at 1:46. Thats the only part I'm having trouble with.
A freaking dealer charged me 376 just to replair intake AIR
This is why I watched this vid some dude tried to charge me 350 mechanics try to get over lol
Insane. The part cost me around $100 at Autozone and I installed it myself. RUclips is your best friend.
Get tired of seeing these black gloves everybody wears.....real mechanics use bare hands.