HP Envy 4500 Service station stall/carriage jam error how to fix
HTML-код
- Опубликовано: 6 сен 2024
- DISCLAIMER: I AM NOT RESPONSIBLE FOR ANY OF YOUR ACTIONS THAT MAY DAMAGE YOUR PRINTER OR IF YOU HURT YOURSELF AND YOU DO THIS ENTIRELY AT YOUR OWN RISK. BY WATCHING THIS VIDEO YOU HAVE AGREED TO THE DISCLAIMER.
This shows how to fix either a carriage jam that may have been caused by the service station blocking the carriage movement or if an error that says 'Service Station Stalled' and you have tried to let the printer automatically reset itself.
Any questions? Just leave them in the comments below.
Thanks for watching!
© Grainger Electrical 2020
Thank you so much! You saved me from a service fee! I was ready to throw the thing out the window. No where on HP support does it tell you how to fix a carriage jam when the carriage itself doesn't move! Can't thank you enough. Hope you have a great day.
No problem.
Thank you! More or less the same thing worked on my HP Envy 5055. It was frustrating because the only apparent reason it got stuck in the first place is that slightly bumping the cabinet which the printer was on caused the access door to fall shut by itself while a cartridge was removed (and I think the cartridge bay's latch was up, too).
Thanks so much for the helpful video! It saved me a trip to the printer repair shop. Your advice worked perfectly!
Thank you this video really help me fix my printer. Thank you so much
YOU ARE A GOD SEND!! Thanks!!!!
Real video. Thank you
Great video - IT WORKED - thank you!
This helped me but the error is still up
Thank you so much!!!!!!! This solved my problem! 😭
Super helpful!! Thank you!
Thanks for making this vid I haf the sane problem ad your bideo helped me and my pronblem was fixed thanks 😺
Thanks, what model is your printer?
Same
THANK YOU!!! You’re a lifesaver!
Thanks very much, mate. Great help.
Glad it helped
how about is incompatible cartridge error ? same model hp envy 4500 ?
Why is the blac thing in. Mine not going back in was wonder if the thing to pull it back slid of
Thank you ! This helped me out alot !
The little spring has come off in mine any idea how to fix this?
This is so frustrating lol because the same thing just happened to me, did you ever get it fixed or replaced?
Thank you bro,my problem is solved.🙏🙏🙏🌹🌹🌹
Thanks, I was able to lift and slide to left and then reset...no screwdriver required.
What if the little rail system doesn’t reset after you get it in the correct position? My ink carriage moves fine now, but that print carriage is stuck... hmm
WHY DID IT JAM?
It can jam for a number of reasons. Normally if the device gets confused when starting up or can be a paper jam. In the video, I caused it jam on purpose to make the video after figuring out what the problem to help others fix the problem.
Now mine is unstuck but when I plug it back in nothing comes up…..no power….the printer is just dead 😩
bah, hate printers -_-
Very helpful. Thanks a lot!