Hey, you have a great style of instructing! At first I wasn't sure, but now I "get you"; you have a fabulous way of teaching how to use the USEFUL adjustments of this device! Thank you!
I would be quite happy if you could switch the noise gate on each channel to be automix instead. Surely not much more processing involved... Deeply disappointing that this hasn’t been included in V2 update.
Need more than that at this days for live sound! Routing. More FX engine Availability to insert FX -plungins on each channel. Automix . I love Yamaha but when it comes offer a basic concept of a digital console their products has lots of limitations compared to the competitors I own a TF5 and I'm not upgrading unless they come with a better design adding more capabilities on their low range price consoles
While I agree with what you said about Yamaha and limitations versus competitors. I don’t think this is made to be a upgrade from tf I think it’s meant for smaller low channel count jobs. My guess more corporate than music.
But without automix it’s virtually useless for corporate. Speaking as someone who’s been doing corporate sound for 25 years, I don’t want to go back to riding faders.
Hello. Good time. I have a dm3 mixer and Neumann KMS 105 microphone. Why didn't you put this microphone among your default microphones? Thank you for your attention🌺🙏
Hello! Question: what needs to be done so that the top bar on the iPad reacts with green misters of all channels like on the console itself? thanks in advance🤝
Looks like a great new small format mixing console, could this be the long awaited successor of the famous 01X of the early 2000’s? I still have 1 working by the way, only in stand alone mode unfortunately as no current drivers.
In addition to small shows, small acts, this would be perfect for smaller corporate GS, breakouts, and interviews/panel discussions/forums If it ONLY had an automix function. What're the chances that Yamaha will come to their senses and add this in the next software, firmware upgrade?
Can u tell me how to set different fx to different channels, I can't do it and can't find anyone who talks about it. Can u only use 2 fxs , why can't I use different effect on different channel. Like plate reverb on kick and room reverb on vocal etc snare etc
How is there absolutely no support for output routing in the manual or any of these videos?? I've mixed two shows with this so far and had to run my sidefills from a bus and do a whole separate mix for them because I couldn't find any information about routing from matrices anywhere online (or really any mention of matrices in general) and couldn't figure it out on my own in the limited amount of downtime I get with the mixer. I even went in in offline mode on the app at home and went through every menu I could find and still couldn't find any way to choose which physical output I route a matrix to (or even a bus). Does anyone know how to do this?
Need please hear 1.automix 2. at least 6fx engine 3. Physical fader less 4. Daw support for external plugin support fully 5. 24ch mic pre amp 6. Studio grade plugin in build 7. Fully based on touch screen no physical fader
to Yamaha technician , must be insert multi band compressor 4 band to all out put , because live music need energi , and added di dgital out put like optical and eas/ ebu, because sound quality output must be importen, tha Yamaha
As I’ve previously said this mixer is the business for me but very disappointing that the rack mount kit, comprising of two angled pieces of metal, isn’t supplied and in the UK is a stupid £107 for the said. Come on Yamaha sort yourselves out, this is just daylight robbery. So a thumbs down for the added extra from me.
This is just a mini TF, less the Dugan....The TF is the most hated console Yamaha has ever made. Surely they could have done better and made the interface more like the actual DM7 if they are going to use the DM designation. Very underpowered mixer...at $2k price tag (for dante version) should have at least 8 aux and 4 matrix...
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Hey, you have a great style of instructing! At first I wasn't sure, but now I "get you"; you have a fabulous way of teaching how to use the USEFUL adjustments of this device! Thank you!
Looks like a Mini TF
Great! The only thing missing is an automix feature, dugan or equivalent.
I would be quite happy if you could switch the noise gate on each channel to be automix instead.
Surely not much more processing involved...
Deeply disappointing that this hasn’t been included in V2 update.
Very good presentation. Please, a tutorial on multi-track DAW recording. Also, does it support time-based mix automation (AUTOMIX)?
thanks alot cant wait for the video talking about how to use it for a livestreaming
All the best for Yamaha's Swiss Army Knife. WICBT.
one issue for me.. there is no sdcard slot for recording all the individual track without the need of an external pc.
No explainer for sub group or DCA ..how do you. Might be wise to explain ch link since its relatively new concept
is possible to connect two yamaha Dm3 S and use it as a 32 channel mixer?
Need more than that at this days for live sound!
Routing.
More FX engine
Availability to insert FX -plungins on each channel.
Automix .
I love Yamaha but when it comes offer a basic concept of a digital console their products has lots of limitations compared to the competitors
I own a TF5 and I'm not upgrading unless they come with a better design adding more capabilities on their low range price consoles
While I agree with what you said about Yamaha and limitations versus competitors. I don’t think this is made to be a upgrade from tf I think it’s meant for smaller low channel count jobs. My guess more corporate than music.
But without automix it’s virtually useless for corporate.
Speaking as someone who’s been doing corporate sound for 25 years, I don’t want to go back to riding faders.
Hello. Good time.
I have a dm3 mixer and Neumann KMS 105 microphone.
Why didn't you put this microphone among your default microphones?
Thank you for your attention🌺🙏
Nice I need this in my life
Can it do group-bus processing? Haven't seen it in any of the presentations so far.
Hello! Question: what needs to be done so that the top bar on the iPad reacts with green misters of all channels like on the console itself? thanks in advance🤝
great marketing video- where are the how to videos. how is the matrix 1,2 intended to be used- can't find any info on this topic
We need a video on sd recording
Looks like a great new small format mixing console, could this be the long awaited successor of the famous 01X of the early 2000’s? I still have 1 working by the way, only in stand alone mode unfortunately as no current drivers.
Can the DM3 (with Dante) control Rio1608-D2?
Very cool! Has it gate?
How do they come up w 22x channels? Can u hook it up to a tio n expand it to say a full 32 channel mixer? Only 4x combo jacks?
In addition to small shows, small acts, this would be perfect for smaller corporate GS, breakouts, and interviews/panel discussions/forums If it ONLY had an automix function.
What're the chances that Yamaha will come to their senses and add this in the next software, firmware upgrade?
Very cool but you got to give us at least 2 more FX engines.
I use to have a rev100 back in the 90s😊
Great little mixer! Solid features for the price.
When is the next instalments of videos coming out, more in depth
How can I quickly turn effects on and off?
does it read automation data out of cubase? 🤔
question, can you use this in a IEM set up for rehearsals?
How much price in Indomesia?
yes
I just recently bought 1 of these and I can't get to the mic effects,
Does it come with an iPad app for remote mixing?
How can i get the dm3 to automate cubase tracks?
Can u tell me how to set different fx to different channels, I can't do it and can't find anyone who talks about it. Can u only use 2 fxs , why can't I use different effect on different channel. Like plate reverb on kick and room reverb on vocal etc snare etc
He answers you at the 5:00 mark
Does DM3 S has M.B.C. on aux outputs?
Bonjour est t’ils prévu de pouvoir travailler avec du RIO car pour le moment je ne vois que le TIO reconnu?
Merci à vous
Can Dante of this board expanse to 32 channels with rack I/O Yamaha Tio1608 ?
Wow Great ❤
None of my effects work , I’ve update firmware and nothing
Would this mixer suit a solo artist for live events, also how could fx be muted like you would on other mixers?
Awesome for solo live. I setup FX mute on the user defined keys. Works well
@@TheBashkimAbdulai thank you, I’ve bought one now and I can’t believe how easy it is to use.
How is there absolutely no support for output routing in the manual or any of these videos?? I've mixed two shows with this so far and had to run my sidefills from a bus and do a whole separate mix for them because I couldn't find any information about routing from matrices anywhere online (or really any mention of matrices in general) and couldn't figure it out on my own in the limited amount of downtime I get with the mixer. I even went in in offline mode on the app at home and went through every menu I could find and still couldn't find any way to choose which physical output I route a matrix to (or even a bus). Does anyone know how to do this?
Same here. Just trying to patch in a powered floor monitor. I thought it was me....
PERFECT YAMAHA 🙂👍
Wow.. superb.. ❤️
Looks good!. It should be cheap 😆
Need please hear
1.automix
2. at least 6fx engine
3. Physical fader less
4. Daw support for external plugin support fully
5. 24ch mic pre amp
6. Studio grade plugin in build
7. Fully based on touch screen no physical fader
Im with you!!
to Yamaha technician , must be insert multi band compressor 4 band to all out put , because live music need energi , and added di dgital out put like optical and eas/ ebu, because sound quality output must be importen, tha Yamaha
As I’ve previously said this mixer is the business for me but very disappointing that the rack mount kit, comprising of two angled pieces of metal, isn’t supplied and in the UK is a stupid £107 for the said. Come on Yamaha sort yourselves out, this is just daylight robbery. So a thumbs down for the added extra from me.
Good Good
🎉
शुभकामनाएं
This is just a mini TF, less the Dugan....The TF is the most hated console Yamaha has ever made. Surely they could have done better and made the interface more like the actual DM7 if they are going to use the DM designation. Very underpowered mixer...at $2k price tag (for dante version) should have at least 8 aux and 4 matrix...
This guy is so painful to watch
Way overpriced