The Cube Autopilot & Flight Controller Compared and Overview + Uavionix ADS-B Carrier
HTML-код
- Опубликовано: 11 сен 2024
- Updated Video taking a look at the Cube Autopilot from ProfiCNC and Hex Aero main models as well as the new Standard Carrier board with Uavionix ADSB Built in discussed, in the coming weeks I will be releasing a number of videos on how to use these and set the new Orange and Yellow Cube Up as well. This is the updated and corrected version.
I want to thank 3DXR in the UK for helping us make this new video, you can order the Cube or Herelink from them at www.3dxr.co.uk
New Orange Cube with ADS-B IN Carrier Board Kit now available www.3dxr.co.uk...
Filmed with the DJI Ronin SC click.dji.com/...
Get Skylum Luminar 3 Photo Editing with Discount Code MADRC macphun.evyy.n...
Thank you for watching and please do Subscribe, Like and Share our videos, we have over 150 videos on this channel talking about many things DJI, Drone and RC so please do go check them out. Above are some affiliate links to the products seen in this video and some trusted vendors. If you have found the video useful I would be grateful for your support by purchasing via these links, this adds no additional cost to you and it help us to keep making videos like this one.
Finally I have been asked for other ways for users to support and they are listed below too.
Support us on Patreon / madrc
Paypal Donate mad_rc@icloud.com
Follow us on Twitter now @madrc1
Thank you for your support its massively appreciated and again please do subscribe, like and share.
Music: www.bensound.co...
#Drone
#Pixhawk
#Cube
![MISSING: SLIM SHADY [Expanded Mourner’s Edition Trailer]](http://i.ytimg.com/vi/xh8qgHrOO1g/mqdefault.jpg)
You, my friend, are the man. Thanks for clearly explaining this.
Thank you.
You are the man to go for as of explanation on the cubes itself and other components, this the best channel for technology thanks my friend for the video 🤩
Super helpful video!!!! i was looking fo a direct comparison chart between the color of the cubes and specs and this video made it much simpler to visualize. Switching from DJI A2/A3/GenAce's to Pixhawks and needed to know the difference. Will be moving all of our UAV's to Blue Cubes/ADS-B's. Thanks once again for the help, im sure there are many like us with the same doubts/concerns.
My other question, are there any Long Range solution for Futaba controllers? We dont want to switch to Taranis/JR. Please advise if you can on this. Thanks once again, Gabriel
We really need a video on using the Herelink system with a fixed wing aircraft. Since the throttle in spring loaded, it's key that users know the process of using the system in whatever specific was is required to make it work. I can't believe no one has done anything to address this.
This is a good shout. I’ll put it on the list for one of the short ones.
Have you ever made a bad video...? Another great video. Thx!!!!
Thanks for all information.
Very clearly explained...
Wow, great video!
Thanks :)
Which one would You recommend for a Quadcopter with a human pilot inside ??
Can any of these handle custom configurations? Like a Hex that can rotate its arms around its axis, either in 2x groups of 3 or 3x groups of 2, with ability for a group to roll either together or n opposite directions.
Also, what about 2x additional motors (ducted fans) for increasing forward velocity while decreasing pitch angle?
I would also like to add additional features such as
•internal ventilation (monocoque frame) that is regulated automatically or manually.
•Comprehensive data logging and live feed.
•Hoist winch.
•ability to switch between preset configurations on the fly. (After releasing payload, a Hex can shut down 3 motors/Octo shut down 2-4 motors to increase flight time/range.
•Recovery of attitude after exceeding maximum attitude values.
•A.I. Capability’s (secret:)
Hey there! You're videos are always helpful to me. Could you please recommend me a flight controller and PDB I'm planning to use 6 Hobbywing X8 motors with 40mm props for my 6axis filming drone and it's going to be hybrid.
I have an older pixhawk 2.1 w/edison. Can I use the new Cube modules?
Yes all carrier boards are compatible with all models of Cube.
Was this video reuploaded? I think I wanted it yesterday.
Yea sorry there was a few mistakes I wanted to correct. Nothing shocking but I wanted to ensure the info was correct.
@@MadRC okay! I wanted to know whether mini carrier board case comes with board. Because I didn't receive one.
I need to check that, the one I have did but that’s not to say it’s standard. I’ll look Into it.
@@MadRC thank you! Amazing video BTW! 😇
I was thinking, Im sure it was more than a month ago when I watched this
Hello, can you do a video on the multi rotor carrier board(Kore). Would the multi rotor carry board(Kore) be used with the Mauch Redundant power modules?
Also, can you compare the blue cube to the orange? Which one is a more powerful cube?
Blue is identical to black in spec and is simply manufactured in the USA rather than Tw.
Hello, does cube orange only suitable for HERE 2 gps, or can we use old HERE gps???
Nope Suports all the same gps and compass. Here, Here 2 and many others via both CAN and Serial.
Orange cube has almost doubled in price