Amazing internal design, it's such a breath of fresh air compare to Kaboo and others! This is in an entirely different league from a build quality standpoint!
Thanks for the feedback... And, please subscribe if you haven't already! 😉 It will be interesting to see if the Inmotion ideas/standards are adopted by other manufacturers.
I've been waiting for an in depth look at the internals of the RS! Thank you! I ordered one back in July and it should be here in the next couple of weeks! I'd love to take you up on your offer for some extra laser cut reflector stickers. How can I buy a set from you?
Thanks. I am adding it to our website, but have realised that courier options make this far too expensive. So, I am looking to get some postal options set up... In the meantime, if you email us at office@roll.nz, we can work out a way to get them to you!
Replacement RS Reflectors are available on our website now... www.roll.nz/int/accessories-parts/176-695-inmotion-rs-replacement-reflectors.html#/234-colour-orange
Thanks for that... It's good to see that he has similar thoughts about the RS. I notice that there is still no gasket. I think I want to look into that...
I slid my RS yesterday turning to fast, its insanely fast lol, but where could I get that part u are pulling out at 15:16 those corner light pieces, one one side it was scraped clean and want to order 2 new corners for my right side. I have to replace the break as well, but honestly the RS held up great. Other then them minor scrapes, the metal was just barely touched. Ill eventually sand it down tho and repaint it due to I want mine to be red👀🏎️
"Insanely fast" is an understatement... We put a professional rider on our one and he was instantly just gone! The parts you are wanting are the Inmotion RS Bumpers (part numbers 400000027-400000029). They list each bumper as a separate part, but the opposite corners are identical, so I'm not sure why (they only need two). Looking at the parts list, the numbers do not come with the reflector in the middle, so you will need a couple of those two (part number 400000032). You should be able to get these parts from the dealer who supplied your RS, though you will probably have to wait for them to be shipped in from Inmotion. Also the reflective tape that covers the mounting screws don't show on the Inmotion parts list. You could source your own tape and just cut them, or you can order some from Roll.nz... www.roll.nz/accessories-parts/176-695-inmotion-rs-replacement-reflectors.html If you aren't able to source them from your local supplier, we can order some for you, though as we are in New Zealand (and depending where you are in the world), the shipping costs and times may not be the best. Email us at office@roll.nz if you would like to discuss in more detail.
By any chance did you noticed any type of USB C output port anywhere on the RS? I pre ordered one and downloaded the manual andnit said under the product specifications page i believe ots page 8 in the manual at the bottom it says "other" it says Output Port: USB C. Unfortunately no one has mentioned that and i wonder if its a typing mistake. Sounds interesting for phone charging.
For my unit, I find that tensioning the stem (by pulling forward on it a little) while lifting the main part of the catch ensures it fully engages. Then the front piece should push all the way back and you can hold it there while tightening the lock screw.
Fair call... Remember that this is a prototype though (with a mediocre paint job). I expect the production units to be more in line with Inmotion's normal standard.
Some serious engineering and effort into RS
Doesn't look like any exposed components on the controllers at all. Completely sealed boxes. Quite impressive.
Amazing internal design, it's such a breath of fresh air compare to Kaboo and others! This is in an entirely different league from a build quality standpoint!
Excellent video, mate. You deserve more subscribers. Glad to see Inmotion applying their design expertise to scooters as well as EUCs.
Thanks for the feedback... And, please subscribe if you haven't already! 😉
It will be interesting to see if the Inmotion ideas/standards are adopted by other manufacturers.
Awesome looking machine 👍👌
Great to see a video of the scooter internals.
Im impressed too. Tempted to buy one...
Thank you so much for doing this!
Thats next level engineering.... maybe segway can be at that level....
I've been waiting for an in depth look at the internals of the RS! Thank you! I ordered one back in July and it should be here in the next couple of weeks! I'd love to take you up on your offer for some extra laser cut reflector stickers. How can I buy a set from you?
Thanks. I am adding it to our website, but have realised that courier options make this far too expensive. So, I am looking to get some postal options set up...
In the meantime, if you email us at office@roll.nz, we can work out a way to get them to you!
Replacement RS Reflectors are available on our website now... www.roll.nz/int/accessories-parts/176-695-inmotion-rs-replacement-reflectors.html#/234-colour-orange
@@EUCBodyguard Will you ship to the United States of America?
@@brandonbajc2084 Yes. I've added a postal option for shipping worldwide.
@EUCBodyguard Thanks! One more question haha, what color is the same as what comes stock on the RS, the yellow or orange?
Excellent review easy to follow well 👍
Ginger on wheels opened it up and made a 18 minute video on the innards of this as well.
Thanks for that... It's good to see that he has similar thoughts about the RS. I notice that there is still no gasket. I think I want to look into that...
Needs Errex damper. Sweet scoot
Already has an internal adjustable damper, stock.
@@foam27 doesn't work. Explain to me that the pucks inside the damper need to be changed periodically. Weird scooters
@@foam27 think about it why would they put in their own piece of s*** damper when they need an e r r e x damper. To save money ..cheese ass's
That anvil grab will make regrets!
Looks ok, but I needed more range
I slid my RS yesterday turning to fast, its insanely fast lol, but where could I get that part u are pulling out at 15:16 those corner light pieces, one one side it was scraped clean and want to order 2 new corners for my right side. I have to replace the break as well, but honestly the RS held up great. Other then them minor scrapes, the metal was just barely touched. Ill eventually sand it down tho and repaint it due to I want mine to be red👀🏎️
"Insanely fast" is an understatement... We put a professional rider on our one and he was instantly just gone!
The parts you are wanting are the Inmotion RS Bumpers (part numbers 400000027-400000029). They list each bumper as a separate part, but the opposite corners are identical, so I'm not sure why (they only need two). Looking at the parts list, the numbers do not come with the reflector in the middle, so you will need a couple of those two (part number 400000032). You should be able to get these parts from the dealer who supplied your RS, though you will probably have to wait for them to be shipped in from Inmotion.
Also the reflective tape that covers the mounting screws don't show on the Inmotion parts list. You could source your own tape and just cut them, or you can order some from Roll.nz... www.roll.nz/accessories-parts/176-695-inmotion-rs-replacement-reflectors.html
If you aren't able to source them from your local supplier, we can order some for you, though as we are in New Zealand (and depending where you are in the world), the shipping costs and times may not be the best. Email us at office@roll.nz if you would like to discuss in more detail.
By any chance did you noticed any type of USB C output port anywhere on the RS? I pre ordered one and downloaded the manual andnit said under the product specifications page i believe ots page 8 in the manual at the bottom it says "other" it says Output Port: USB C. Unfortunately no one has mentioned that and i wonder if its a typing mistake. Sounds interesting for phone charging.
I have just checked over our RS... Remember that this is a pre-production unit, but it doesn't have any USB ports that I can find.
Very hard to lock once I unfold. Please help
For my unit, I find that tensioning the stem (by pulling forward on it a little) while lifting the main part of the catch ensures it fully engages. Then the front piece should push all the way back and you can hold it there while tightening the lock screw.
The swing arms look so cheap!
Fair call... Remember that this is a prototype though (with a mediocre paint job). I expect the production units to be more in line with Inmotion's normal standard.