This was just brilliant! Us 2 old codgers struggling more and more untill we watched this, great descriptions making it easy for us to understand what to do, thanks x
I have same hinges as on your video. I have managed to lift the door up as there was a gap at the top and stopped the draught, but now I cannot get the screw, within the hinge in between door and frame, to screw home as the two above thus leaving a draught and the door not closing in tightly enough. The cover plate sits slightly proud as well. The other two hinges are good. Any Ideas please. Do you know the manufacturers name of this particular hinge. Thank you.
If it’s the screw that would on a normal hinge be a pin. Sounds like you may of unscrewed it too far, you could try to shut the door and lift the handle and then try to re screw back in. Sorry not sure what the hinges are called. Thanks.
You would still need to adjust all three hinges if there is no gap at the top but you have a gap at the bottom. If you draw a line at the top of the door you can see how much you can lower the door. Hope it helps. Thanks for watching.
The best explanation of this process I have seen on RUclips
Thanks
Thank you Shaun👍🏻
This was just brilliant! Us 2 old codgers struggling more and more untill we watched this, great descriptions making it easy for us to understand what to do, thanks x
@Bettyfoxtrot 😀Thanks. Glad it helped.
Really thorough explanation. Very helpful for a couple of "not handy around the house".
Thanks Sally. Glad the video was helpful.
Thank you for that simple video,I will have to give it a go as I've got that same problem, breeze from the top.
Yes give it ago. Thanks for watching
Lovely job mate and thanks for explaining I think you've given me the clues I need for mine...
Thanks Ross. Glad it helps. Thanks for watching.
Very helpful, thank you for your explanation!
Thank you for watching
I have same hinges as on your video. I have managed to lift the door up as there was a gap at the top and stopped the draught, but now I cannot get the screw, within the hinge in between door and frame, to screw home as the two above thus leaving a draught and the door not closing in tightly enough. The cover plate sits slightly proud as well. The other two hinges are good. Any Ideas please. Do you know the manufacturers name of this particular hinge. Thank you.
If it’s the screw that would on a normal hinge be a pin. Sounds like you may of unscrewed it too far, you could try to shut the door and lift the handle and then try to re screw back in. Sorry not sure what the hinges are called. Thanks.
Cheers for the help!!
Thanks for watching, glad it helped 👍🏻
Which hinge do I adjust if the gap is centre bottom, but fine at the top?
You would still need to adjust all three hinges if there is no gap at the top but you have a gap at the bottom. If you draw a line at the top of the door you can see how much you can lower the door. Hope it helps. Thanks for watching.
Bro you saved me!! Thanks 🙏
Great stuff. Thanks for watching. 👍🏻
Thanks - worked for me
Great to hear. Thanks for watching.
Thanks
Thanks for Watching, Please Subscribe if you haven’t already. 👍🏻
Ty
Thank you for watching
Sorry,but this is not a good video,I have no idea what you are doing?
Sorry Paul. The video is how I adjusted my Patio doors. Thanks for watching