Their is now a V2 version of of this car, they have switched to a 4300kv motor & down to a 19t 0.7M pinion to help with the cogging issues when running on grass. They have also addressed the range issues on the radio on the V2 cars.
@@chizzle2457 Banggood list the 2 different brushless motors 3400kv & 4300kv as random delivery, I take that to mean you could recieve either mk1 or mk2 versions.
Great vid Richie! I don't think I'll be getting the 124016/7, because of the cogging (that can be fixed, with a little gear change work), but mainly because I just finished converting my 144001 to brushless a week ago! I'm running a budget bashing setup, with a Surpass hobby combo 2440 4600kv + 35a BL ESC, as well as a new motor mount, Wltoys A959 15t pinion (pretty rare), and M2.5x8mm hex screws. Absolutely a blast, I thought the 144001 was pretty lively before on the brushed motor, now it's a whole new beast! Much improved acceleration, battery life, heat management, effeciency, plus a few MPH higher top speed (about 37-38 flat out in ideal conditions), and torque.
I bought this car on Banggood preorders months ago. It's a brilliant little car! There's a lot of hate for this cheap Chinese cars but these Wltoys ones are proper hobby grade cars. I haven't broken anything on mine yet and I jump it a lot on my ramp, I take 8-10 metre long (between 1-2 metre high) jumps easily and not breakages. Awesome value for money.
Saw that they recently released a V2 version with a 19T pinion and bigger motor to avoid cogging issues, but didn’t see you having any issues with yours….
Both of my mine (this one and 124016) cog to the point it’s just not fun. Plus the body on the one is completely twisted due to not being large enough for the electronics underneath. They’re good deals but that’s still over $200 sitting on the shelf. I’ve ordered another motor so that I can change the pinion gear. Ordered a few weeks ago lol. 3s helped a little. Surpass program card made it worse. New surpass esc didn’t help at all. So it’s def 100% in the gearing. They sold an awful lot of these knowing good and well they had a major issue. Not cool! I will say, though, that my 124016 is a fantastic car. I run it on 3s and unless I’m on a high traction road with wheels turned (that will cause it to cog indefinitely. Refusing to go forward) it runs great on the road. It won’t start from a stop in the grass. That’s the way it goes sometimes though!
Awwww, shit Govna, We weren't able to meet up here, while you lived out here in San Jose, I'm in Oakland. That's too bad, I'll make sure to keep checking out those 2 solid hobby stores that you frequented in San Jose, yeah? Hope you like PA bro, good for you getting to move out of Falicornia!! I'm next!! Cali is long done with, as far as a place to live and call home....Rock on Govna 👍💯
always wondered richie, what made you move from the uk to the states? i aint bashing you for it lol, im 16 but ive always wanted to live in the states or australia (only temporay though haha) just wondering how much of a head ache was it making the move???
Work on the wife’s side.But I would say look at what you can do to get over here. You can apply for college over here and get a U.K. grant. Contact me via the ‘about’ page as my cousin has moved over likewise
Their is now a V2 version of of this car, they have switched to a 4300kv motor & down to a 19t 0.7M pinion to help with the cogging issues when running on grass. They have also addressed the range issues on the radio on the V2 cars.
Wait is it still on the same listing or a whole different car
@@chizzle2457 Banggood list the 2 different brushless motors 3400kv & 4300kv as random delivery, I take that to mean you could recieve either mk1 or mk2 versions.
Great vid Richie! I don't think I'll be getting the 124016/7, because of the cogging (that can be fixed, with a little gear change work), but mainly because I just finished converting my 144001 to brushless a week ago! I'm running a budget bashing setup, with a Surpass hobby combo 2440 4600kv + 35a BL ESC, as well as a new motor mount, Wltoys A959 15t pinion (pretty rare), and M2.5x8mm hex screws. Absolutely a blast, I thought the 144001 was pretty lively before on the brushed motor, now it's a whole new beast! Much improved acceleration, battery life, heat management, effeciency, plus a few MPH higher top speed (about 37-38 flat out in ideal conditions), and torque.
We missed you man! Welcome back!
Glad to see u back..
Thanks
In your new gaff - yes 😊👍
Richie is back! 🤟😝
That is amazing to live in PA! Best place for RCing!
How are you my boy? Hope the fam is doing well
@@DriftomaniacsRC Doing well.
@@jdpaslRC you should come here to PA.
@@ReadytoRunRC or move to there!! haha.
@@jdpaslRC haha whichever but wait a few months. This is the worst time of the year. Too dark and cold.
YOU THE MAN, RICHIE!!!! GOOD JOB..
Welcome back, I still have work to do before my next drop.
Great video Richie
your Rc barn looks good
I bought this car on Banggood preorders months ago. It's a brilliant little car! There's a lot of hate for this cheap Chinese cars but these Wltoys ones are proper hobby grade cars. I haven't broken anything on mine yet and I jump it a lot on my ramp, I take 8-10 metre long (between 1-2 metre high) jumps easily and not breakages. Awesome value for money.
Nice car, good video 👊🏻👊🏻👍🏻
Nice test Richie! 👍😊
Very impressive speed but they really should’ve given it a dual rate for the steering.😞
Indeed it’s the one thing that would transform it from an 8 out of 10 to a 10 out of ten
I’m a sucker for some clickbait. New shop is dope bro
Thx 4 u review
Saw that they recently released a V2 version with a 19T pinion and bigger motor to avoid cogging issues, but didn’t see you having any issues with yours….
The V2 motor is the same size 2845 but upped to 4300kv + going down to 19t 0.7 mod pinion instead of 3400kv on the V1 version that used a 26t pinion.
Both of my mine (this one and 124016) cog to the point it’s just not fun. Plus the body on the one is completely twisted due to not being large enough for the electronics underneath. They’re good deals but that’s still over $200 sitting on the shelf. I’ve ordered another motor so that I can change the pinion gear. Ordered a few weeks ago lol. 3s helped a little. Surpass program card made it worse. New surpass esc didn’t help at all. So it’s def 100% in the gearing. They sold an awful lot of these knowing good and well they had a major issue. Not cool! I will say, though, that my 124016 is a fantastic car. I run it on 3s and unless I’m on a high traction road with wheels turned (that will cause it to cog indefinitely. Refusing to go forward) it runs great on the road. It won’t start from a stop in the grass.
That’s the way it goes sometimes though!
thats awesome im in pa i live in the north central part where ABOUT DID YA MOVE? HOW YA LIKING THE COOLER WEATHER SO FAR
Snowing yesterday Jim! I miss the snow so much roll on winter ❄️
Awwww, shit Govna, We weren't able to meet up here, while you lived out here in San Jose, I'm in Oakland. That's too bad, I'll make sure to keep checking out those 2 solid hobby stores that you frequented in San Jose, yeah? Hope you like PA bro, good for you getting to move out of Falicornia!! I'm next!! Cali is long done with, as far as a place to live and call home....Rock on Govna 👍💯
always wondered richie, what made you move from the uk to the states?
i aint bashing you for it lol, im 16 but ive always wanted to live in the states or australia (only temporay though haha) just wondering how much of a head ache was it making the move???
Work on the wife’s side.But I would say look at what you can do to get over here. You can apply for college over here and get a U.K. grant. Contact me via the ‘about’ page as my cousin has moved over likewise
Nice Richie what part of Pennsylvania are you at
Wagontown nw of Philly
What the link to the battery you used (3s)?
My first RC was an FTX Kanyon
Edit: title deceived me 😂
Hello from V&b speed a new rc community channel v&b speed..from California the vally 559..open them.boxs Xmas time🚨🌍✌
Well... Its no Radio Shack rc crappy toys. I read the intro.wrong, didnt I ?