Elevator tech: "fuck it, nobody will ever see this cabling job .. let's just throw down a couple of clamps and get the hell out of here.." Beno: "LOLOLOLZ - LOOK AT THIS SHIT JOB, EVERYBODY!"
The digilift wins. The other one looks like it’s logic board has been ripped straight out of an old DVD player! It’s so tiny. Maybe it uses some cheap Allwinner cpu. I wouldn’t be surprised. The chimes sound utterly horrible too. They sound harsh and they try to rip-off the Otis gen2 chime. The bad cable management looks so amateuristic too. Doesn’t look like the work of a professional lift engineer. It looks like it was done by an intern.
oh my word those are bad XD the original lift car and motor still in use with the digilift is good to see tho, wonder what those looked like when they were ILE and even if they were something else before that too
OMG this is so hilarious. xD Where I live, generics are usually on the same quality level as what Schindler does. Logics by Kollmorgen, NewLift or Schmersal, usually fully intelligent, well configured and mostly with pre-doors. Then I see what is going on in the UK and this really makes me understand all the hate against generic lifts, haha.
In France we have so many Fuji Frenic Lift VF. Our French manufacturer, Sodimas use them. I don't hate Frenic Lift VF but I know better VF, for exemple: Yaskawa VF, Otis OVF10/20/30...
@@benolifts no spending 4 yrs learning a trade and educating yourself is the preferred way. You're going to end up killing someone or preferably yourself.
@@boostage52 Ooooh! Someone has got angry! Becoming a lift engineer is one of the worst things someone can do. Having an interest in lifts as a hobby is far better. So tell me, how many epic old relay lifts have you murdered and replaced with modern rubbish?
2:56 It appears to have a micro SD card in it, which means it most likely isn't a dedicated lift controller, but instead some sort of off the shelf general-purpose computer board EDIT: and if I didn't know any better I would make a joke about it being a raspberry pi
We looked at the files on the SD card to see if it had audio for the lift voice. The sd card just contains settings so that if there are multiple lifts, the same settings can be loaded onto both lifts.
10:06 omg that could be quite dangerous actually imagine you were using the inspection controls and you slip and touched that and then you'd be cooked by 100s of volts
As having worked on alot of Spanish and Italian controllers, and Chinese. I far prefer the Chinese lifts, their logic and tools required to work on it was far better and reliable
I love the video and here is my reaction looking at the lift. Err... I don't know why their lift logic design looks like that, the logic and instructions are complicated, why are the circuit board red, And also the name... Digilift. Digi and lift. Digilift, what is digilift? It's digital, a lift, and it's a complete garbage. All 3 in 1. This is a very weird, ugly, but interesting mod. I-I-I just lost for word, I don't know what to say about the lift and the logic 5:41 And Why is "THIS" look like a "GAMEBOY?"
Our school lift is worse than this one. It takes 20 seconds to level and it changes it's leveling style at diff. floors and also the lift malfunctions 1 time a day. It's horrible. The buttons are cr6p and the logic🤢🤮🤮🤮 all floors call panels are replaced. Inner controls are replaced. THERE IS A SHOPPING MALL NEAR OUR SCHOOL BUT THERE ARE ECODISCS! WHY OUR SCHOOL SCHOOL MANAGER PUT TUNC-SEL (Turkey's generic) !!! Bloody hell🙄
The "No-name" lift has to be the worst! Everything about it is just so shit! The Digilift seems pretty shit too. Keeping the original chassis is really nice; makes it look more original. Do you have any clue as to what these were originally?
@@benolifts kinda everything lmao, I don't know anything about lifts and my friend, who is into lifts and stuff like that sent the link to the video to our friend group saying "you might like this" and I understand absolutely nothing🤣
In this video I am taking the piss out of a terrible lift modernization. The 2 lifts used to run as a set (one call button controls both lifts) and had ILE logic controller, which is a very simplistic, but reliable lift controller that is easy to maintain, and is one of the most well known, so easy for engineers to maintain. These lifts got converted into an utter bodge job that is so bad that it is laughable. The logic controllers got replaced. The 2 lifts now have different logic controllers, so can't work as a set anymore. Both logic controllers are terrible and very hard to use and understand. Cheap Italian Chinese rubbish. Most engineers also wont have seen these before, making the lifts much harder to maintain. Also a lot of the lift set up makes the modernization look like a rushed half hearted job by the engineers. The new logic controllers are the worst sort of electronic design that some inexperience designer would come up with. Like someone that knows how to program electronics but has no idea or experience on how lifts actually operate. To someone that has just done a university degree it may think that it is perfectly fine to use some off the shelf electronic components to build something that operates a lift. But in reality, the 130 years of history of lifts has led to well made designs using specific components to operate a lift. And while some Chinese microcontroller could be made to operate a lift, it will be complete crap. The lift wont land at a floor in a nice way. And the system would not be intuitive for fault finding, and engineers that have to work on the system wont understand how to use it. In this video we could not stop laughing at how bad these lifts were.
6:55 the cable management is like my bathroom shower hose
Elevator tech: "fuck it, nobody will ever see this cabling job .. let's just throw down a couple of clamps and get the hell out of here.."
Beno: "LOLOLOLZ - LOOK AT THIS SHIT JOB, EVERYBODY!"
The digilift wins. The other one looks like it’s logic board has been ripped straight out of an old DVD player! It’s so tiny. Maybe it uses some cheap Allwinner cpu. I wouldn’t be surprised. The chimes sound utterly horrible too. They sound harsh and they try to rip-off the Otis gen2 chime. The bad cable management looks so amateuristic too. Doesn’t look like the work of a professional lift engineer. It looks like it was done by an intern.
The cheap logics dont seem super terrible actually, just a proprietary piece of mess probably. Makes it hard for maintaining
if they are that bad, you could call it illogics because they are completely illogical
The no name logic seems DIY to me.....are lift companies just buying a "make ur own lift" kit from China
That new motor looks really underpowered.
9:04 I love this Saftlybreak
This is the fastest I've gotten something in my recommended. Why? No clue.
oh my word those are bad XD the original lift car and motor still in use with the digilift is good to see tho, wonder what those looked like when they were ILE and even if they were something else before that too
How you get mad is the best :)
Oh yes this horrible Industry! Everything is going downhill to the point it’s getting downright crap.
2:58 new lift logics with a burn mark? Thats new
Bro I saw this video that people can stop an escalator by pushing the back of their feet to the step of the escalator. Try this
Is the digi lift made by digi key electronics.
OMG this is so hilarious. xD
Where I live, generics are usually on the same quality level as what Schindler does. Logics by Kollmorgen, NewLift or Schmersal, usually fully intelligent, well configured and mostly with pre-doors.
Then I see what is going on in the UK and this really makes me understand all the hate against generic lifts, haha.
The digilift be like *don't touch me or my son* 🤣🤣
Unmanaged cable; tripping hazard. Rest of the installation; trippy.
These logics make Lester Controls look superior, and plus both lifts have a ripped off Older Kone/Otis chime
Tyw noname lift has the otis gen2 chime
Digilift was better
Classic Beno 😀👍 I bet those are the kind of lifts that would crush a person by moving with the doors open 🥵🥵🥵
OMEGA lift:
In France we have so many Fuji Frenic Lift VF. Our French manufacturer, Sodimas use them.
I don't hate Frenic Lift VF but I know better VF, for exemple: Yaskawa VF, Otis OVF10/20/30...
Rather prefer Otis gen 2 or a Schindler elevator
They should have done this mod on April fools.
in the church that i used to go to (before covid) they had a garaventa lift
Why does Digilift look like a fire retainer cabinet
When you haven't got a clue what your doing don't touch anything.
The only way to learn something is to press every button until you understand it
i think we got a otis guy here
@@benolifts no spending 4 yrs learning a trade and educating yourself is the preferred way. You're going to end up killing someone or preferably yourself.
@@boostage52 Ooooh! Someone has got angry! Becoming a lift engineer is one of the worst things someone can do. Having an interest in lifts as a hobby is far better. So tell me, how many epic old relay lifts have you murdered and replaced with modern rubbish?
@boostage52 it seems like someone doesn't like mr @@benolifts !
2:56 It appears to have a micro SD card in it, which means it most likely isn't a dedicated lift controller, but instead some sort of off the shelf general-purpose computer board
EDIT: and if I didn't know any better I would make a joke about it being a raspberry pi
We looked at the files on the SD card to see if it had audio for the lift voice. The sd card just contains settings so that if there are multiple lifts, the same settings can be loaded onto both lifts.
Which one is the worst?
10:06 omg that could be quite dangerous actually imagine you were using the inspection controls and you slip and touched that and then you'd be cooked by 100s of volts
As having worked on alot of Spanish and Italian controllers, and Chinese. I far prefer the Chinese lifts, their logic and tools required to work on it was far better and reliable
A quick google search says that Digilift is Italian.
First time Beno said that ILE is good
7:37 Otis GeN2 Chime??
That is so crap that it actually makes evil owls cheap crap somewhat better
Gruppo mille piani is italian and it means 1000 floor group :D
The second lift is a new RALOE lift, you've seen them before as a Swallow lift
Gotta say, i prefer the digilift due to the mod.
I like the name Digilift though, and I'd say that lift was the better of the two.
Password find for the win
7:54 OMG SHANGHAI STEP
i’d say the no name is the worst lol
the doors is not fully closed like on skyscrapersim
Do you really think people actually care about which lift their building is gonna use over how much money they are gonna lose on lawsuits against them
Some salesmen made a killing here.
2:54 the whole lift control software is on a sd card 💀
Yeah, those logics is too bad for me
Evil owl's Evans lift alliance has a challenger
I love the video and here is my reaction looking at the lift. Err... I don't know why their lift logic design looks like that, the logic and instructions are complicated, why are the circuit board red, And also the name... Digilift. Digi and lift. Digilift, what is digilift? It's digital, a lift, and it's a complete garbage. All 3 in 1. This is a very weird, ugly, but interesting mod. I-I-I just lost for word, I don't know what to say about the lift and the logic
5:41 And Why is "THIS" look like a "GAMEBOY?"
It's probaby down to the budget.
I seem to find Italian websites. When searching digilift or kappa systems.
Our school lift is worse than this one. It takes 20 seconds to level and it changes it's leveling style at diff. floors and also the lift malfunctions 1 time a day. It's horrible. The buttons are cr6p and the logic🤢🤮🤮🤮 all floors call panels are replaced. Inner controls are replaced. THERE IS A SHOPPING MALL NEAR OUR SCHOOL BUT THERE ARE ECODISCS! WHY OUR SCHOOL SCHOOL MANAGER PUT TUNC-SEL (Turkey's generic) !!! Bloody hell🙄
Hey, guys. Where's Austin?
You mean windows xpnt. He’ll soon come ;)
5:46 That looks like some kind of ripoff GameBoy!
I'll have the Grupomillepiani Scallopini Piccata and a glass of your shittiest Chianti .. grazie!
Hey Austin this is guys
Hey guys this is Austin
Hey xpnt this is windows
Hi again
hey digital this is lifts
The "No-name" lift has to be the worst! Everything about it is just so shit! The Digilift seems pretty shit too. Keeping the original chassis is really nice; makes it look more original. Do you have any clue as to what these were originally?
Well at least one of the lifts motors original or near enough original
I'd actually say the other no name is the worser one, digilift isn't as crap
Just horrid. I'll take a NewLift FST MRL w/Ziehl Abegg over these
which lift umm umm ecodisc Kone so much better
EARLY ACCESS CLUB
YESS
Alright!
No name lift ofc
I think the Chinese Crap Lift is more crap!!!
someone just sent me a link to this video and I understand nothing💃
What parts would you like more information on?
@@benolifts kinda everything lmao, I don't know anything about lifts and my friend, who is into lifts and stuff like that sent the link to the video to our friend group saying "you might like this" and I understand absolutely nothing🤣
In this video I am taking the piss out of a terrible lift modernization. The 2 lifts used to run as a set (one call button controls both lifts) and had ILE logic controller, which is a very simplistic, but reliable lift controller that is easy to maintain, and is one of the most well known, so easy for engineers to maintain. These lifts got converted into an utter bodge job that is so bad that it is laughable. The logic controllers got replaced. The 2 lifts now have different logic controllers, so can't work as a set anymore. Both logic controllers are terrible and very hard to use and understand. Cheap Italian Chinese rubbish. Most engineers also wont have seen these before, making the lifts much harder to maintain. Also a lot of the lift set up makes the modernization look like a rushed half hearted job by the engineers.
The new logic controllers are the worst sort of electronic design that some inexperience designer would come up with. Like someone that knows how to program electronics but has no idea or experience on how lifts actually operate. To someone that has just done a university degree it may think that it is perfectly fine to use some off the shelf electronic components to build something that operates a lift. But in reality, the 130 years of history of lifts has led to well made designs using specific components to operate a lift. And while some Chinese microcontroller could be made to operate a lift, it will be complete crap. The lift wont land at a floor in a nice way. And the system would not be intuitive for fault finding, and engineers that have to work on the system wont understand how to use it.
In this video we could not stop laughing at how bad these lifts were.
@@benolifts I feel bad for you🤕
Hi Beno
No name lift is worse
Dodgy lift?
No one knows how to program lifts nowadays!