@@BOFIRacingTV My 6spd nb1 feels decent with this setup. I'd love to try the miata roadster shifter though if a certain UK based speedshop would stock it :D
Just did the bofi clutch kit with a lightweight flywheel and rebuilt my shifter while we were their, new oil and rear main seal aswell. What a difference! Although I've developed an awful decel rattle I need to look into since 😅
I just did the rebuild kit in my 04 Miata. There was nothing left of the original poly center bushing when I took it apart. I used a brass bushing as well. It's just soo tight and perfect now!
Great video, clear to follow. Ive just done mine. Although I used an OEM nylon bottom bush rather than a bronze one. Good tip to lubricate the shifter, a little dab of silicone sealant did the trick. I also used Redline Shockproof oil for the turret.
Almost identical to what I did recently, have replaced it previously with oem stuff but added the beatrush bush, jass upper and a 90mm tomei knob, its a proper shift now. Also new insulation helps as the heater is good enough without the transmission adding more heat and I have no ac 😂.
I did mine, forgot to put the upper pivot ball on. Had to pull off the rubber thing praying it wouldnt snap. Easiest way i found was to turn it inside out and it should slip off...
I love the oatmeal 🤣 my shifter still feels like this after the rebuild on NB1 6spd
5 speeds feel the best! Reverse is so vague on a 6 speed too 😂
@@BOFIRacingTV My 6spd nb1 feels decent with this setup. I'd love to try the miata roadster shifter though if a certain UK based speedshop would stock it :D
That oat meal cut away was perfection 😂
Just did the bofi clutch kit with a lightweight flywheel and rebuilt my shifter while we were their, new oil and rear main seal aswell. What a difference! Although I've developed an awful decel rattle I need to look into since 😅
Have you fixed it? This is most probally the PPF not being in alignment
Love these videos, happy that you guys are back making them😁
Thank you the support 😌
Production quality is definitely a step up, keep it up, loving the content so far!
This was one of the first mods I did to my NA8. It made a world of difference and I highly recommend it as well.
Good to see the vids back. Rebuilt my shifter last year.
Thanks! Did it feel lovely afterwards?
I just did the rebuild kit in my 04 Miata. There was nothing left of the original poly center bushing when I took it apart. I used a brass bushing as well. It's just soo tight and perfect now!
Big up Dan for all his present wrapping skills
And hiding of stickers and sweets within
Love that orange paint
you guys deserve more recognition for your content, keep up the good work!
Thanks for the haribo Dan... Much appreciated😁😀
Any time bud 😁 I read the additional order notes too so add a good joke next time to brighten my day
Mind blown, sat here in my 3rd NB and only after watching this and then looking at the cup holder, having my life changed forever 😂 thanks Bofi 😂❤
Great video, clear to follow. Ive just done mine. Although I used an OEM nylon bottom bush rather than a bronze one. Good tip to lubricate the shifter, a little dab of silicone sealant did the trick. I also used Redline Shockproof oil for the turret.
Almost identical to what I did recently, have replaced it previously with oem stuff but added the beatrush bush, jass upper and a 90mm tomei knob, its a proper shift now. Also new insulation helps as the heater is good enough without the transmission adding more heat and I have no ac 😂.
Nice you did it properly 🙌
Brilliant vid! 🤩
Love these cars great fun.
Please keep the video’s coming they are good fun to watch.
🇯🇵cars rule.
Glad you're enjoying the content 😁
I did mine, forgot to put the upper pivot ball on. Had to pull off the rubber thing praying it wouldnt snap. Easiest way i found was to turn it inside out and it should slip off...
Rebuilding the shift is on my list. Looks like a fun task
EYY i own this car now! what a beauty
That was my old car and me in the video
Where are you? I'd love to see it again
HOLD UP that cutout in the cup holder is for the handle? That's the goddamn best
Last mod hks premium exhaust for a nd just ordered a gear knob from you guys beatrush
Could you do a video on dump valves ?
love the porridge!
oh lawd he back, WB!
Will you be selling those nardi wooden spoon bowl shifters ?
I didn’t see any mention or video of the insulation that on top of the boot.
Is it normal for the shifter to wobble when you’re driving? Like it vibrates a lot it jiggles around?
Does the 6 speed box also require the oil to be sucked out and topped up from the turret when doing this job? Just ordered my kit!
Cheers
👍🏁🏆
🔥👻🌶️
The pin you hammered out where can I buy a new rear one
What did you guys think to our surprise guest? 😍
Great content. More of that fd please 😍👌
More of Dan please!
We will invite it back for a play one day!
Yes!
Can 6speed nb use the na short throw shifter?
What about a short shifter?
Anyone know where they got the fog light surrounds at the front?
The whole front bumper may be for sale soon ;)
Three mountains?
Can somebody tell me what are thoses wheels, they look good
They are ultralite ul12.
I now own this car 😂
Dillon. What's your socials? Would love to see what's been done to it!
what are those wheels ...
They are ultralite ul12 ✌