Wow, great, the wait was definitely worth it! You've hammered the plaques into the aluminum much better than I managed to do. (The link in the description doesn't work 😉 )
Unfortunately, I posted the project later than I imagined. I thank you again for your work 😊. Sorry again that the link doesn't work. I've changed the link now. But it takes a while for RUclips to make it visible to everyone.
Making a new copper ring, man that looked effortless and my mind couldn't understand how you achieved it. You must be a machinist with all the shortcuts and tricks! Amazing
But it has to be aluminum. Metal would be too hard and break the plastic 3d print. but with thin sheet aluminum it goes very well. you can print so many different shapes
I feel like a minor improvement on the original design would be to slight recess around the holes so the upper edge of the metal ring would sit completely flush with the table. But also dang, the manufacturing of that missing ring was spot on!
I thought about that too but the reason it isn't like that is because the green felt makes up for the extra space and in the end it's all one smooth flat surface. If they were recessed the felt would be pretty difficult to fit under and around all of the rings considering the recess would be a straight 90 degree cylinder, it would cause strain to the felt over time and the felt would still add height to the rings.
@@MWRestoration i got them as a gift a long time ago, though i havent used them in 10 years. always strive to conserve the past, they will never make things like these ever again.
There's lots of things I really enjoyed about this video. I was impressed with how you made the ring out of copper tube and how you made and finished the numbers. But what I like most is how accessible this is. Based on this video alone, if I wanted to, I could repeat this process. It's a soothing and cathartic video that I liked from start to finish.
Great work! I could watch you all day! You have a wonderful selection of very expensive equipment and tools. Not only that but you know how to use them well. God bless.❤
Sometimes what works, just works. This is _the_ style for restoration vids. Everyone puts their own twist on it, but the nondescript hands working over a bare table and lathe is the go to. Still rad, just interesting.
Brilliant work and great results! Thank you for the work done and for the opportunity to get acquainted with the forgotten page of the last century bar life. 5 stars!!!
Oh man I look up and down Kleinanzeigen and spend this way at least two hours a day, but you pull one unique item out of your cylinder after the other 😂. Thank you once again for an amazing restoration 😉👍
Hey RUclips friend 😊. You also make cool videos. you're right, I also look all the time on ebay classified ads to see if anyone has posted anything new. it's a bit crazy that you're looking for very old rusty objects. Where most people only buy new things. are you also from germany 🇩🇪?
Very high quality work, i like the 3D printed number molds. I think the only thing that might be more appropriate for such an old item would be to use oil paint on the aluminum numbers, and maybe polish or nickel plate the corners and latches rather than plastic coat "chrome"
This looks like a home version of the game given the description of the rules. It also looks like the early version of a coin-op game called Hooligan Pool which seems to have very similar rules. I've never seen a Hooligan Pool machine in the wild but it would be a treat to see this or Hooligan Pool for real. Beautiful work, I'm saving this video so I can make my own copy.
Absolutely beautiful to watch and a superb restoration, the numbers were beautifully done. Just to complete the job you should draw a baulk line across the table with a 'D' on it and there should be either three or four skittles, depending on which rules you play to. One should be black, two should be white and there can be a red one. I have a full sized one and very much enjoy a game when I have visitors.
This is so inspirational. I am a maker and this quality of work drives me to want to make beautiful things. In my opinion you deserve to be so proud of your work.
Fascinating. The ways you made the pocket rings, and especially using the 3d printed mold to hammer out the labels, were really surprising to me. But looks great.
Looks amazing, my family used to make billiard tables, the only step missing is leveling the table, you can see that the table is not leveled when he started playing.
Absolutely fantastic work! I am telling you right now. That person should be a professional restorer who fixes old things by running a restoring business to make some money.
Throwing the parts to be restored hard and rather reckless onto a solid surface could possibly expose them to potential further damage and/or wear and tear. But then again, placing them gently and carefully most likely won't be dramatic and interesting enough for RUclips viewers nowadays....
That's exactly how it is. I've had some comments as to why I didn't use a wood spatula to fill in the holes. I explained to people that you don't always have to repair everything 100 percent. You should be able to tell that this is a very old item, but it is in good condition.
Schöne Arbeit, ist wirklich gut gelungen. 👍😃 Es fehlt jetzt nur noch der grüne Stoff (oder etwas ähnliches) an der unteren Seite der Lochplatte, sonst wird sie genauso krumm werden wie die alte Lochplatte. 😉
Wow, great, the wait was definitely worth it! You've hammered the plaques into the aluminum much better than I managed to do. (The link in the description doesn't work 😉 )
Unfortunately, I posted the project later than I imagined. I thank you again for your work 😊. Sorry again that the link doesn't work. I've changed the link now. But it takes a while for RUclips to make it visible to everyone.
The link still does not work
1¹
16:22
😂😂@@MWRestoration
I’ve never in my entire life seen someone so prepared and ready for anything like this man here
And your machinery is so clean and new looking. Great job
Making a new copper ring, man that looked effortless and my mind couldn't understand how you achieved it.
You must be a machinist with all the shortcuts and tricks! Amazing
why am i watching this at 3am
I was also
You're not alone bro
Me 5 am, I can't sleep
I'm watching it at 1:30 a.m. Why????
3:24 where I am 💀 brother you’re not alone
Восхитительно! Я не смог оторваться от просмотра, кажется я даже не моргал - настолько это видео завораживающее. Спасибо!
Спасибо за просмотр и за ваши добрые слова, мне очень приятно 👍🙂❤
Beautiful work. I never tought possible to emboss metal with 3D printed plastic. It's way less brittle than I imagined.
But it has to be aluminum. Metal would be too hard and break the plastic 3d print. but with thin sheet aluminum it goes very well. you can print so many different shapes
If it works on aluminum, it would also work on annealed 321 stainless of the same thickness
これは物を大切にするという人間の心の輝きを感じます。これを使っていた昔の人達の笑い声と笑顔が甦ってきます！
Amazing job on pressing the red marks. The finished set is perfect, thanks
Thank you for your comment 👍. It takes me a few tries to get the perfect result, but it was worth it.
I feel like a minor improvement on the original design would be to slight recess around the holes so the upper edge of the metal ring would sit completely flush with the table.
But also dang, the manufacturing of that missing ring was spot on!
Thanks for your comment 👍. I'm still amazed at how the ring was made. it's so intense that you can make a ring out of a metal tube. just crazy. 😁
Looks amazing, but it would have been nice to keep some of the original patina.
part of the challenge is to overcome the edge of the rings
I thought about that too but the reason it isn't like that is because the green felt makes up for the extra space and in the end it's all one smooth flat surface. If they were recessed the felt would be pretty difficult to fit under and around all of the rings considering the recess would be a straight 90 degree cylinder, it would cause strain to the felt over time and the felt would still add height to the rings.
@@B_M_A never make the rings flush, leave them be, always.
Damn. People really were small back in those days..
Love seeing old games restored. Excellent work!!
Класс делал кольцо из латунной трубы, а на выходе получил стальное, молодец Гарри ты волшебник
👍😁
Бильярд зажил по-новому. Спасибо мастеру, лайк однозначно.
Я очень рада, что вам понравилось видео. увидимся в следующий раз
Lovely refurbishment. Should last 100 years and might even end up in a museum of childhood games.
I have to do a good idea 👍
La bonne restauration c'est de ne rien changer ou de ne rien ajouter ou extraire de l'ancien objet 😊. Juste réparer ☺️
👍
The stain looked beautiful and the whole process from start to end was captivating.
Flawless work!! Dying the wood and making it look new is just 👌🏼👌🏼👌🏼👌🏼👌🏼I also love listening to this while I sleep. It’s relaxing 😌
Magnificent work of art!! I love everything but all the metal parts were the best!! Congratulations!!
Thanks buddy. Yes I this restoration went very well ;-)
Самое сложная работа, делать старую на новую,это здорово на память век веков❤❤❤
i love miniature billiards. i have 2 sets. great job saving this piece.
Thanks for your comment. It's cool that you also have bar pool tables like this. These days it's not that common anymore.
@@MWRestoration i got them as a gift a long time ago, though i havent used them in 10 years. always strive to conserve the past, they will never make things like these ever again.
it’s 9am and i have not went to sleep yet these videos are the only thing keeping me sane atm
It's a beautiful restoration, and it looks like a very intersting game !
Thanks😊
Beautiful restoration of a fantastic piece I’ve never seen anything like this before
Thanks bro 😊👋
There's lots of things I really enjoyed about this video.
I was impressed with how you made the ring out of copper tube and how you made and finished the numbers.
But what I like most is how accessible this is. Based on this video alone, if I wanted to, I could repeat this process.
It's a soothing and cathartic video that I liked from start to finish.
You could not repeat this based on this video alone. Stop it.
Уровень его мастерства я оценил, когда он сделал кольцо и цифры.
Having the right tools & equipment certainly helps. Fantastic craftsmanship. !!!
Thanks buddy. Yes I this restoration went very well ;-)
Great work! I could watch you all day! You have a wonderful selection of very expensive equipment and tools. Not only that but you know how to use them well. God bless.❤
Such a great stain you chose. Much better then the original. And this classic game is now looking the best it's ever been.
Thank you for your comment 👍. you are right, now it looks better than the original 😁
Amazing job on pressing the red marks the finished set is perfect,thanks
Sometimes what works, just works. This is _the_ style for restoration vids. Everyone puts their own twist on it, but the nondescript hands working over a bare table and lathe is the go to. Still rad, just interesting.
Thanks buddy. Yes I this restoration went very well 😊
Просто услада для глаз! Неверятно тонкая работа! Мое почтение!
Brilliant work and great results! Thank you for the work done and for the opportunity to get acquainted with the forgotten page of the last century bar life. 5 stars!!!
thanks for watching my video 😊. Unfortunately, the game isn't played that often these days😞.
Oh wow. When you fell out of the talent tree you certainly hit every branch on the way down!!! Unbelievable work my friend. 👌👏🏻👍🏻
Thanks for watching and for your kind words I really appreciate it 👍🙂❤
That,s funny😂
Oh man I look up and down Kleinanzeigen and spend this way at least two hours a day, but you pull one unique item out of your cylinder after the other 😂. Thank you once again for an amazing restoration 😉👍
Hey RUclips friend 😊. You also make cool videos. you're right, I also look all the time on ebay classified ads to see if anyone has posted anything new. it's a bit crazy that you're looking for very old rusty objects. Where most people only buy new things. are you also from germany 🇩🇪?
@@MWRestoration yes also from Germany. I live in Darmstadt, what about you?
@@NTRprojects
@@MWRestoration❤
@@NTRprojects
I have never seen someone use a lathe to shape metal like you did. That's so cool!
It is called Metal Spinning
@@johanjanssens4530 Thank you. I appreciate your input. I will look into it.
The restoration is amazing!
Thanks buddy 👍
At this point 7:00 I wasn't even impressed any more.. I was in awe..
You sir are a master craftsman. Mesmerizing.
Thanks 😊
Great restore! I was doubly impressed by the metal spinning for the new hole ring.
Why am I watching this at 5am
Lol I am watching this and this comments pops up, 4:37am lol
2:31am EST
Honestly I am absolutely staggered 😮
Hats off pal 🫡
Very high quality work, i like the 3D printed number molds.
I think the only thing that might be more appropriate for such an old item would be to use oil paint on the aluminum numbers, and maybe polish or nickel plate the corners and latches rather than plastic coat "chrome"
This looks like a home version of the game given the description of the rules. It also looks like the early version of a coin-op game called Hooligan Pool which seems to have very similar rules. I've never seen a Hooligan Pool machine in the wild but it would be a treat to see this or Hooligan Pool for real. Beautiful work, I'm saving this video so I can make my own copy.
Superb restoration; was very interesting to watch.
Вот это да! Стол выглядит лучше, чем когда мы его покупали!
Absolutely beautiful to watch and a superb restoration, the numbers were beautifully done. Just to complete the job you should draw a baulk line across the table with a 'D' on it and there should be either three or four skittles, depending on which rules you play to. One should be black, two should be white and there can be a red one. I have a full sized one and very much enjoy a game when I have visitors.
Fabuloso trabajo. ¡Felicitaciones!
Cordial saludo desde Montevideo, Uruguay.
Fabulous work. Congratulations!
Warm greetings from Montevideo, Uruguay.
Gracias por tu comentario. te saludo desde alemania 🇩🇪
7:21 ~ the precious piece 💕
Yes you are right 👍😊
@@MWRestoration feminine intuition.. i was just sure of it 💕 "(^ . ^)"
one of the most satisfying restoration videos ive ever seen! you are a true craftsman and i salute you!
Beautiful restoration. You did it very well 👍👍
Thanks 😊
Amazing work. I can’t believe how MANY different tools you have for the job 😶🌫️
Excelente restauração meu amigo!!!😊
Thanks 😊
I liked that little bit of cold blueing!
This is so inspirational. I am a maker and this quality of work drives me to want to make beautiful things. In my opinion you deserve to be so proud of your work.
Thanks for watching and for your kind words I really appreciate it 👍🙂❤
Wow, this is both amazing and relaxing to watch ❤
I really like your Restoration, thats so cool, 😮
Very relaxing to watch. Amazing craftsmanship.
such beautiful equipment you've got.. excellent job with the piece.
thank you so much 😊
Really nice rehab of this billiard table. Cheers
Fascinating. The ways you made the pocket rings, and especially using the 3d printed mold to hammer out the labels, were really surprising to me. But looks great.
It took me a little time to get the result to look good. But I think it was worth it
Wow, I love the ball return; simply elegant.
I have always wanted to find a small bar snooker table, but I don't think any were made.
This is so beautiful and amazing to watch. The skill, talent and patience to restore and film is outstanding. I enjoyed this so much! Subscribed!
thank you so much for your comment I am so happy to hear that my videos have that effect on you 😊❤
Looks amazing, my family used to make billiard tables, the only step missing is leveling the table, you can see that the table is not leveled when he started playing.
I've played proper Bar Billiards on worse
Condition?
Well, good for u?
College kids destroy everything
That’s nice 👍🏻
iu !ù(😮⅞❤
@@blgmonster1631
It's like watching a How it's Made episode and im all about that! 👍🏻
Restoration? Nah. Basically made a new one.
Mean
@@stonepinper3183 It was a compliment!
@@stonepinper3183how
Absolutely fantastic work! I am telling you right now. That person should be a professional restorer who fixes old things by running a restoring business to make some money.
Throwing the parts to be restored hard and rather reckless onto a solid surface could possibly expose them to potential further damage and/or wear and tear. But then again, placing them gently and carefully most likely won't be dramatic and interesting enough for RUclips viewers nowadays....
Very nice restoration I have never seen a portable billiards table before, I thought it was sales mans sample at first.
Would love that powder coat setup! Awesome restore
Dude your a genius 👏 I applaud you for this restoration great job beautifully done ✔️
Never been first :) Now to watch the video....
Congratulations my friend . Have fun watching
Very impressive work mate! So many steps involved. I like that you formed the missing ring yourself👌
thanks 😊 @@RestoredChannel
Beautiful work... just that, game looks interesting too, but that is perfect skill and good tools
Просто красавчик!!!!👍🏻👍🏻👍🏻🔥✌🏻🚀
Большое спасибо 😊
I like how you left the small nicks and dings alone instead of using wood filler on them. They add some charm and character.
That's exactly how it is. I've had some comments as to why I didn't use a wood spatula to fill in the holes. I explained to people that you don't always have to repair everything 100 percent. You should be able to tell that this is a very old item, but it is in good condition.
It’s so satisfying to watch this. Great job man.
Man this guys super talented 👏🏻
thank you so much 😊❤
We had game table similar to this in the 70s as kids, the fights we had to get to play it
Those were good times when children still played properly. now the kids only play computer games. that's a bit of a shame
Extra wyszło... profesjonalna robota..
Wreszcie polski komentarz. Dziękuję za pochwałę. Nie zapomnijcie zasubskrybować😁. Pozdrowienia z Niemiec 🇩🇪
Excellent restauración but i sugested the Woody fill the holes whit sealant is more Nice 🇻🇪👍🏻🤘👏
thanks 😁😊😊😊
I love this kind of stuff. Good job!❤
Excellent❗️beautiful so much ‼️
Thanks buddy. Yes I this restoration went very well 😊
素晴らしいです。
凄すぎて思わず笑ってしまいました。
物を大切にする想いと技術を観て刺激を受けました。
私の友人、コメントありがとうございます。私はドイツから来ました。残念ながら私は日本語が話せないので、Google翻訳を使用しています。私のスペルが完璧でない場合はごめんなさい。それでは、次のビデオでお会いしましょう。ドイツからのご挨拶🇩🇪
That’s beautiful man!!! 🎉🎉🎉
Отлично получилось👍👍👍 Ты большой молодец! Спасибо за такие видео😊😊😊
Спасибо за ваш комментарий
That looks like it would be fun to play!
Tolle und professionelle Arbeit 👏
Danke für deinen Lob. Grüße aus Bremen 👋
@@MWRestoration das war kein Kompliment, sondern nur eine Feststellung 😉😊
Mummified fly should be sent to a museum.
where is the Mummified Fly?
never mind I saw the mummified fly
Absolutely Magnificent 👏
I love restoring old things but this person is at another level 😊
Oh man, thanks for the compliment 😊. What next projects would you like to see?
@@MWRestoration I love wood so anything that gives wood a second prolonged life makes me happy 😊
Just stunning great work all involved
Crazy how much smaller people were back then.
Первый раз такую вещь вижу...очень интересно.🎉
Спасибо за ваш комментарий. Я очень рада, что вам понравилось видео. До следующего раза 👋
Какая же это долгая и кропотливая работа. Однозначно заслуживает лайка. У вас золотые руки😊
Wow! What a beautiful bit of craftsmanship..subbed.
Thank you for the kind words and the sub! We appreciate your support. 😊👍
Superb craftsmanship 👍
Very nice! Hours of fun, both before and after restoring this table billiards game. Nice trick with transforming that piece of tube into a ring.
Thank you! Glad you enjoyed it. 😊
I love how automated your workshop is, I hate to restorations with tons of manual labour 😂
You're right. A well organized workshop is the most important thing
First video of yours I've seen and I'm wildly impressed!
Instant subscription!
Schöne Arbeit, ist wirklich gut gelungen. 👍😃
Es fehlt jetzt nur noch der grüne Stoff (oder etwas ähnliches) an der unteren Seite der Lochplatte, sonst wird sie genauso krumm werden wie die alte Lochplatte. 😉
Danke für deinen Kommentar. Ich habe ein dickere Holzplatte als die Originale verwendet. Ich hoffe mal das die Holzplatte jetzt länger hält.
those little red tin numbers were great to watch