Beginner Embroiders a Hat on Bai Embroidery Machine Vision 1501 Industrial Multi Needle
HTML-код
- Опубликовано: 8 фев 2025
- Beginner Embroiders a Hat on Bai Embroidery Machine Vision 1501 Industrial Multi Needle #baiembroidery #vison1501 #howtoembroiderahat
In this video I will show you how someone who is new to embroidery, can embroider a hat with the right steps taken. All done on a very affordable Bai Embroidery Machine model Vison 1501
Neita Fajita Facebook Crafting Group:
/ 11168. .
Bai Sales Rep Contact Information (Use code NEITAFAJITA for free gifts):
Stefan's Email: stefan@ebaima.com
Stefan's Facebook: www.facebook.c....
BAI Embroidery User Group:
/ 32463. .
All Stitch Link:
allstitch.com/...
_____________________________________________________________________
Where I got my Baby Lock Flourish II:
shrsl.com/323tt
Where to purchase blank shirts for embroidery:
ajblanks.com/?...
SVG Bundles
designbundles.....
_________________________________________________________________________
Etsy (use code NEITAANDTHREAD for 15% off)
www.etsy.com/s....
or
www.etsy.com/shop/neitaandthreadtees
Website (Use code FREESHIPPING)
www.neitaandthread.com
TikTok:
@neitaandthread
________________________________________________________________________
Supplies I use:
Sublimation Printer: amzn.to/3dkKPOy
Sublimation Ink: amzn.to/3djhDar
Sublimation Paper: amzn.to/3x1Jq74
PE800: amzn.to/2IUp5fM
Embroidery Thread: amzn.to/3pM03Ar
Heat Press: amzn.to/3kN5Q69
Tear Away Stabilizer: amzn.to/390K8IW
Precut Tear Away Stabilizer: amzn.to/331uZ6b
Thread Stand: amzn.to/3fd0S0w
Fabric Clips: amzn.to/2HgegnU
Embroidery Needles For Baby Blankets: amzn.to/35MDfsr
Water Soluble Stabilizer: amzn.to/2Hix469
Heat N’ Bond Light: amzn.to/38YHhjn
Clear Bags I Use:
12"x16": amzn.to/37mAE9r
10x13": amzn.to/3vUdvnM
Repositional Hoop: amzn.to/3jO2bFr
Stackable Bins For Blanks: amzn.to/2Q1QaS3
Clear Glass Fabric Weights: amzn.to/3gXk4AL
The printer's link: www.amazon.com..., (10% off discount code: TU6I4XBT)
The label paper's link: www.amazon.com.... (5% off discount code: MU05514YT)
*some of these links above are affiliate links*
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I am buying my machine tomorrow and I am not going to lie I am a little scared about it but if I don't try how would I ever know. Hoping to make amazing designs and some decent profit my end goal is to be my own boss and never have to work a 9-5 for anyone else ever again lets go 2024 goals! Your vid was great, thanks!
Thank you for the video. I paid for my BAI this morning. Love watching any videos to help me learn how to use the machine. Yours was thorough and very good.
Thank you! We are getting ready to buy our 1st emb. machine and getting the one you have 1501 BAI.
Great video! I think the flap you folded our of the way is called the sweatband 😉
Lmao 😂
Thank you!
Thats what its called!! 😂😂
The thingy?
Great job. Your family is so cute and I really like both of your hustle. I am so happy for you.
Thank you so much. We love having your support and having such a great community in our corner backing us.
Thanks for the video! I need to get to work on practicing on hats!
I still need tons of practice
Love those colours. I think you're both very sensible in buying the Bai because like you've said previously, they are half the price of some others you were looking at. If you need another one, specifically for hats - it's more affordable to have 2 Bai's - rather than just 1 more expensive machine. It'd be great if someone would sponsor you with a machine! Thanks for sharing x
Man we a second so bad already. It's funny. We would love for a sponsor machine, but also we enjoy owning our stuff outright and being able to give 100 percent honest feed back
@@Red.E.Hustle Aw, I'm sure you'll get another one very soon. I can see how owning your own is beneficial. It's an investment and you know it won't be taken away from you x
@@Sooz3112 it's such a good value, we will have 2 in no time I know it! I'm just going to keep focusing on the craft and switching back to flats for neita 😂
Sweet! Awesome Job! Great video, Thanks. Continue with more...I'm waiting for your next video...
Thank you so much! Don't worry you will not have to wait long. ☺
Looks great!
Thanks man
Great job love it - a real person doing an instructional video it is awesome to see and a loss for words is normal and that flap I believe is called a sweatband again great job!
Words seem to get hard when the camera is on 😂
Wow a Minnie Pearl Hat! (Aka tags on)! Looks good! Love me some 90/14 Needles! Directions matters.
I may have or may not have put one in backwards. Not admitting to anything. 😂 Someone recently told me size 90 will not work because you have to adjust timing. Have you heard of this?
@@Red.E.Hustle 90/40 Is a standard needle as long as it is in correctly! You doing good so When is Nita giving in and getting you another machine!
@@brendamaroney2966 hopefully soon! Won't take as long to save for as a melco at least
Hi Eric, thanks for sharing so I am learning from you how to embroider a hat. all the best. Love to subscribe.
Awesome Red E!
Thanks!
Does come with software ? Or you got your own Embroidery software ?
Great video
How do you microadjust for center or closer to the bottom once the pattern is in place?
ASMR! O yea baby!!!
Going to live stream me licking microphones later, make sure to hit the bell icon to get notified.
Good video thanks
do you match the bobbin thread? with the color you are working or is always white?
Good morning
A little help, what is the maximum size that a cap logo can be for a BAI mirror embroidery machine?
I had a 65mm logo made and the
top edge or part of the needle is deformed. I would appreciate your help.
Good video.
Did you get in 8 min?
Looks nice....yes I got a machine ...I'm nervous about it
I was too. But once you do it and more you do it, you will become very comfortable with it
Whose the supplier for the embroidery machine? Alibaba?
do you change the part on top of the bobbin? like the flat piece that gores on top go bobbin thread, I saw in the cap video for BAI the they change that piece but want sure which one was which
Just curious, why did you spray it with water? I've not ventured out doing a hat yet, still trying to get my logo's down to perfection. There is really a major learning curve to these industrial machines vs the domestic machines.
What speed were you able to run at?
How are you turning the hoop from left to right? Mine stays still. Is there something I need to press in order for it to turn? I would appreciate your input. Thank you!
Use a straight pin into the eye of the needle to help hold it in all the way and correctly.
I love it! Thank you for the suggestion. Way better than those big ol needle nose 👃
Help please. I recently used the Ricoma 1501. It’s currently down. So we’ve purchased the BAi Mirrir to embroider caps (that’s our business). However, we cannot get parameters setup. The factory settings sends the design to the side. We’ve watched videos, consulted the user’s manual, the works. But it’s still not working properly. Would you, could you help, PLEASE???
How long did it take exactly to embroider it ?
Any tips for Richardson hats?
@@netwrkops bigger needle, heat applied to the front to soften it up a bit. Slowing down the machine a bit. We don’t do Richardson too much but it can be done. Got to dial it in.
Richardson hats are horrible.
Did your machine come with the laser
Great job
How did you get your laser light to work
Mine just turns on when I move the design or when I trace. But I had to aim it while it move to get it right.
Nice video! I didn't know the Vision has a laser. When I trace there is no laser. I have a Vision 1501.
@@michaelqdoba it moves so it might just not be pointed where it's supposed to be
@@Red.E.Hustle I turned off all of the lights including the light bar on the machine. Ran a trace and couldn't see any res light shooting anywhere. Just might not be working? Thanks for the reply!
@@michaelqdoba no problem at all. Maybe they didn't include it on yours. I would double check with your agent. Maybe they can mail it out to you.
Have you tried the Hooptech Gen2 hat hoops on this machine? I am planning to get a Vision 1501 and really wondering if this machine will be worth buying for me if I plan to do mainly hats
Where did you buy your hooping station?
Thanks for the video... I have a machine coming and im trying to get my knowledge base up. Q: What speed were you running at?
I run at 800, but when a hat is giving me problems I drop to 600 or so.
Where did you get the cap station?
Hey bro. Is there a chance you can help me with my machine. Please. 🙏. I haven’t been able to start using it.
Hi how far to the back can you emb the range?
Did you use stabilizer? Just curious.
No I didn't
Some say structures hats don't need it, some say tear away 🤷♂️
@@Red.E.Hustle Thank you Erik. Your video was very helpful.
What does the water do?
Helps soften the structure, I use a lil mini steamer now
The Bai machine arrives with the cap hoop and driver attached. I removed the cap hoop. How do you remove the cap driver? Thank you!
I'm sure you figured it out by now, but there are 2 screw you have to loosen in the back first. Then it slides off.
@@Red.E.Hustle I did but THANK you for responding. I was getting frustrated so I asked for help. Much appreciation.
the stitching on your hat is a little bit spread out, is it done like that on purpose? Can the BAi 1501 do more solid stitching to where it kinda overlaps?
Did you find the answer on this?
use 75/11 needle for hats. no need to wet the hat. have files fir hats to start at the bottom center up. need any help just reach out
I no longer use the 90, but have kept the 80 around. I have been steaming the difficult hats. What kind of machine do you use?
@@Red.E.Hustle we use the Barudans, but the process is the same. i've ran most brands in the past.
@@datukevznwede6043 any tips on hooping?
@@Red.E.Hustle just keep it in the groove. and make sure you leave room for slight movement of the cap after tracing.
Sweat band??
Orrrrr thingy?
Whatchamacallit
@@02downhome lol i think thats it!!!
how big can the cap design be?
I wouldn't go bigger than 2.25 inches tall
What is the price of machine in us$
Is the hat wet?
Can anyone tell me why the water?
to make the hat surface a little softer for the machine, sometimes that type of fabric is stiff
Man, help me out here. I have done Decky hats, Richardson 112s, Yupoongs. I've tried everything and I'm just busting needles left and right. I can't even finish a hat. Any suggestions man? I could use the help..
Double check how you are hooping the hat and slow the machine down a bit
@@Red.E.Hustle ya I've done that.. What kind of needles do you use?
how come you dont use the needle insertion tool?
I dont have one lol
but i got good lol
What’s the name of sew machine ?
How do you like the Bai?? Would you get another one?
I have 2 now lol. And just got a ricoma. I would recommend both
Do you sell the hat for $40 after all that work?
Oh ya
Yup don’t undervalue your work
why did you dampen the hat before you embroidery?
tremenda m de video el detalle mas importante lo tapo y es que si la mal di ta gorra vas por debajo del gancho o vas por arriba y en todos momento lo tapo q m x y bloqueado por st
That doesn't have an automatic threader. With an automatic threader you don't have to put thread through the needle the machine does it for you. I say that cause my Brother does its super easy and a I don't touch the needle.
I've been looking at this machine due to being 15 needles and I have a few 10 needles.
mucho ruido y pocas nueces
Why does everyone play music, it's really annoying? I would like to hear how loud the machine is compared to my Barudans. I'm looking at buying their 6 head and I really am trying to get some honest feedback. Do you still like your BAI?
You should buy the 6 head, make a video, and let us know. Thank you.
Your videos are really helpful. I have the bai too and following your suggestions. Do you have any videos on how to adjust parameters to bring design a little lower. I know you can’t just push arrow buttons like on flats. If there’s one can you pinpoint it for me and if not would you consider making one. You are so clear and understandable. Thank you!!
its called sweat band, lol
What's the name of the machine