Pierce in Fiber Laser Cutting | Perforation in Laser Cutting 2
HTML-код
- Опубликовано: 28 мар 2022
- Our Store/Nuestra Tienda: spierlaser.en.alibaba.com
Contact: +86-13335151833 clara@spierlaser.com
The video will talk the "Pierce" in fiber laser cutting and perforation in laser cutting. There are two videos "this video and last video". We will continue “Pierce”, talking some experience and the common problems. 
Наука
Excellent video!
Thank you
Thank you! Super!
Thank you too!
Very informative!
thank you
Hi Clara, I didn't quite understand one thing, regarding point 5, does reducing the auxiliary gas pressure increase or decrease the perforation time ?
Hi Clara I'm so pleased you started to the video series on Cypcut, and laser cutting in general. Would please make a video about the focusing the laser beam on a manual laser cutting head. On thicker materials vs thin materials Thank You
Recently, all machines are equipped with auto head, let me find a way.
@@ClaraChai Thank you Clara
@@lamania32 so welcome!
Hello Clara!
I recently purchased a 1.5 kw Laser, I watched your videos which were very helpful and thank you. Now I'm trying to cut 12mm carbon steel, I used the parameters indicated by you but it doesn't work. The problem I have is with drilling. I would like if you could explain the logic of the parameters in the drilling stage, (how and why each parameter must be set according to the type of material). From what I can see, drilling the material at a good quality is more difficult than the cutting itself.
The parameters I or others shared are only for reference, you need to find yours.
Hi Clara, thank you for all the information. I have a question. On our 4kW Laser, the pierce is good but it is shooting alot of sparks out of the top and my nozzle is getting real dirty during pierce to the point that it will not allow me to cut the entire sheet properly. What parameters should I start looking at? For Reference, the material is mild steel, 3mm and I am using oxygen. When I cut the same material with nitrogen, the pierce and the cuts are beautiful but I cant seem to keep the nozzle clean enough to get the same effect with oxygen. Thank you very much.
It should be the Pierce setting, please get the proper parameters. And I don’t have your parameters.
Hi Clara, I have one question, right now i have one laser marking machine which is used to mark on stainless steel base but right now its not marking on it, for testing i marked on aluminum plate its working well on that but not on base which i normally use for marking, is this machine loses its power ? or there is some thing else? kindly guide me. machine is only
6 months old.
I’d love to help you. First you need to check whether the focus is correct. And it could be caused by many factors, don’t scare yourself, it may not be the laser source. But my suggestion is to look help from your supplier first, they know a lot of your machines and it is still under warranty.
What is This stainlessteel or mildlsteel .we can do stainlessteel focus minus but you say mild steel it plus in focus deferent can ido and setting my mechine.i use bodor laser 4kw
What I said is the common setting, please follow your specific instructions accordingly.
Hello Clara i have 3kw laser fiber raycus but i can’t set pierce parameter even i watched your post about set parameter but i can’t work with your parameter
You said you can’t set it. Why?
My parameters are for reference, the components of your machine, the gas and even the metal plates are different from mine, it is definitely you can not just copy my parameters to your.
Olá Clara, é possível fazer um furo de 6mm em uma chapa de 10mm com qualidade?
?
hello Clara...Thank you for your videos ❣....i am cutting 3mm CS with my 3000watt machine without piercing, the cut is Good and ok 👍.....does cutting without Pierce effect or damage the lenses or the head?
Pierce will play a big role in cutting thick metals and sometimes high reflective materials.
Thank you Clara. @@ClaraChai ...i am Big fan of your videos and perfect work🙂
Hello Clara, thank you for the informative video. I have a question: in CypCut, what is the meaning of "Lighting Pierce", "Segment Pierce", and "Follow Pierce" in CypCut?
You can get the answer from my videos of Pierce and 6 Functions
@@ClaraChai Thank you for the reply, I have watched the 6 functions video, and both Pierce 1 & 2, but I could not find where you defined the above terms.
@@dopple33 Probably we called them in different names.
when my laser machine starts the pierce it will make a huge explosion, and make a big hole, i have tried 2 stages, 3 stages, direct, max power, very low power, long piercing times, short piercing times, and it always does the same. (im trying to cut 4mm mild steel with oxygen) the blow is big, and the hole is irregular, making the following cut to be very big and irregular
It is your parameters setting.
I have a 6kw laser but don't set any parameters... How to set parameters
You can find a parameter video in my channel, but I suggest you to contact your supplier, asking them how to set parameters.
you have a 6kw laser which is probably getting close to a million dollars...... but you don't know how to set any parameters? Cool story bro. LOL!!!!!
I'm in Kuwait
Good to know😁
Hai my friend
Thank you!
I'm buy machine in chaina... Now corono time so no one come to here
Yeah, it is difficult time for everyone.