I recently picked up an fs 38 second hand. No instructions, no manual and ultimately...no clue. This 10 minute video taught me everything I needed to know, and a couple things I was doing completely wrong. Thanks for educating me and making this video!
Great video, I have a FS45 and it's the first time I see how to feed the spool properly. I used to make 1 side and then the other. Now I follow your way and it's way faster and easier. I have it for 25 years but I have replaced the knob at least 3 or 4 times...that's clearly the only weak point of that machine. They should have made it out of aluminum
Very complicated starting method. Line spool removal not at all obvious either. No markings or instructions on machine. You explained it all ! Awesome.
The mowing head on the FS38 is a major pain... It CONSTANTLY RUNS OUT OF TRIM WIRE. It use like 6 feet of trim wire (per side) for 200 linear feet of trimming. I need to fill it twice and when i finish the lawn it is empty again... On top of that, opening up the mowing is super difficult and feeding fresh wire into the head is also really complicated. It takes like 20-30 minutes per wire refill AND you need 2 tools to do it. The head is on so tight you need to put the mower it a fixed table vice and you need a pair of pliers to wrench to the top off. Only then can you add wire. Engine perfromance is good and the trimmer ergonomics is fine... But Jesus, having to deal with such an under performing mowing head makes me want to sell this piece of junk everytime i use it. I do not recommend this product to anyone.
You did a really fantastic illustration of everything. I was given one for my birthday about 5 years ago and I use it a LOT and I love this little guy. I have not had one lick of problems with it but then me being very elderly you learn that if you take good care of your equipment then your equipment will take good care of you. I always get comments that it still looks brand new It's cleaned thoroughly after each use. LOL I'm laughed at because I was my 2016 riding mower but again it looks almost like the day I brought it home. Stihl is top of the line. Thank you again for the amazing presentation Sir.
Bumping it will also even up the length and balance the line length by doing this the harmonics (out of weight line one long one short) will even out and reduce the vibration by a lot !
I have seen people pock one side straight in one side and other on other side,I just bought one of these and it seems to show you can just pock string right through and then turn knob to get equal lengths on each side.seems a lot easier than this way.
I have a fs38 the pull string snapped went to replace it as soon as I went to replace it the.spring underneath the housing uncoilled can you do a video on recoilling it or advice to do it thanks
So you pulled off the rope pulley? Mistake number one. Recoiling the spring can be fun. Maybe just buy a new spring. Your fingers and patience will thank you
When operating properly you may never have to change spark arrestor I would recommend changing the air filter every year or two depending on how heavy of use
Bumping the trimmer head. As the head is cutting, the width of the cut is seen. When that width gets smaller, it is time to bump the head to allow more string to be released, widening the width of the cut. No need to "time" oneself.
Funny just bought one and it started but won't let me rev it up cause it dies, the guy at the shop said I'm pulling the throttle too fast and I need to slowly build the RPM... no matter how slow I pulled it the thing would die. So now I have to take a BRAND NEW whipper snipper (line trimmer whatever your country calls them) to get serviced
@@diesel_man99 No line that diameter will generally require a head did you put strips of line in. If you’re looking to run heavier line why not go up to the straight shift machines?
I mow in one piece for an hour, at most an hour and a half, but it happened that the original head overheated at the nut and melted completely, and I could barely get it off the shaft to replace it! Is there a time limit for mowing, or is something else wrong? The trimmer is one year old and barely used!
@@TheJanez59 the reason I ask is because generally the only reason I see the failure of the bearing at the bottom is because of the guard is removed, and the clamp on the bushing is relieved and therefore ruins it
I purchased a FS 38 last year and it is a great machine. But my yard usually takes 2 string refills. I am looking for an easy load head for my FS 38; one where you feed the line in and twist the head to suck the new line in. (Like the newer FS 40 does) Does Stihl make a replacement head for the FS38 that does this? If so can you supply a part number?
premixed fuel such as moto mix is very, very expensive. i have a quart of lucas 2 cycle synthetic blend and a mixing cup i bought off amazon. i do 50:1. i have a fs38 for light work and a fs90 i bought years ago for the heavier work.
@@Carlsmower so if you are particularly worried about it, maybe buy a can of pre-mix and at the end of the year dump the gas out and fill the tank with premix. start it and run it for a few minutes. i cant see using a fuel that costs over $30 a gallon as a primary fuel...... if you actually use the machine for any amount of time.
The sting isn't the problem. I'll gladly take a rock or string. It's the poison ivy that's killer. Even if I don't intend to hit it, I've been met with the mist of death and 2 weeks of torture.
Anyone have any tips for this? Because we’ve taken our fs38 to the dealer multiple times, paid way to much in “repairs” and it’s still the biggest piece of crap I’ve ever had the misfortune of owning.
With a decent trimmer head good trimmer line and an understanding of the mechanics of the line head they really do work pretty freaking flawless. But when things don’t work it is a pain in the……
The engine seems decent. Everything else is rubbish. The easy feed head is probably the worst design ever. The line continuously gets stuck inside the spool if you load more than ±2m and that is rediculous. I have taken it to the two agents in my area and they both gave up. Two replacement heads later and it is stil rubbish.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Had it over 6 years still going. The best trimmer that doesn't weigh your arms down is an absolute little beast.👍👍👍👍👍
By far the best complete video I have seen so far. This made that the spool way easier to thread. thank you for this....
I recently picked up an fs 38 second hand. No instructions, no manual and ultimately...no clue. This 10 minute video taught me everything I needed to know, and a couple things I was doing completely wrong. Thanks for educating me and making this video!
So Relieved I found Your Video....Your Explanation made it so Easy. Thank You. ..
Great video, old mate Josh is very knowledgeable and seems like a top bloke
Excellent tips, thank you for sharing!
Thank you for such a thorough review!
Excellent presentation 👍
Thank you
Good explanation and demonstration of wire replacement and overall use👍
Thank you Carl! Great video, helped lots!
That’s what we were aiming for 😃
Great video. Thanks Carl. Definitely subbed!
Great video, I have a FS45 and it's the first time I see how to feed the spool properly. I used to make 1 side and then the other. Now I follow your way and it's way faster and easier.
I have it for 25 years but I have replaced the knob at least 3 or 4 times...that's clearly the only weak point of that machine. They should have made it out of aluminum
I keep forgetting I is ignition. O is for Off.
Why they couldn't just have labeled the switch is a mystery for me!
But thank you for it!
Apparently that’s a universal language. That nobody knows. 😅
I have fs38 - trimmer is year 2006, and still working.
Right 👍
Very complicated starting method. Line spool removal not at all obvious either. No markings or instructions on machine. You explained it all ! Awesome.
So happy to help. Enjoy the 38
Instructions for that is useless do it yourself
The mowing head on the FS38 is a major pain... It CONSTANTLY RUNS OUT OF TRIM WIRE. It use like 6 feet of trim wire (per side) for 200 linear feet of trimming. I need to fill it twice and when i finish the lawn it is empty again... On top of that, opening up the mowing is super difficult and feeding fresh wire into the head is also really complicated. It takes like 20-30 minutes per wire refill AND you need 2 tools to do it. The head is on so tight you need to put the mower it a fixed table vice and you need a pair of pliers to wrench to the top off. Only then can you add wire. Engine perfromance is good and the trimmer ergonomics is fine... But Jesus, having to deal with such an under performing mowing head makes me want to sell this piece of junk everytime i use it. I do not recommend this product to anyone.
Maybe I will do a video on how to reload that have because it actually reloads very quickly and easily
Buy Stihl autocut c6-2. It's easy to re-wind. I rewind it in like 5 minutes. And also use 2.4mm line (0.95")
@@vladd9344 Looks promising indeed ! thx
You did a really fantastic illustration of everything. I was given one for my birthday about 5 years ago and I use it a LOT and I love this little guy. I have not had one lick of problems with it but then me being very elderly you learn that if you take good care of your equipment then your equipment will take good care of you. I always get comments that it still looks brand new
It's cleaned thoroughly after each use. LOL I'm laughed at because I was my 2016 riding mower but again it looks almost like the day I brought it home. Stihl is top of the line. Thank you again for the amazing presentation Sir.
Ours floods all the time and its a PAIN to keep it running
You are the man!!!
haaa! you wont believe the dopey way ive been doing this all these years 😂 many thanks buddy 👍
Bumping it will also even up the length and balance the line length by doing this the harmonics (out of weight line one long one short) will even out and reduce the vibration by a lot !
I have seen people pock one side straight in one side and other on other side,I just bought one of these and it seems to show you can just pock string right through and then turn knob to get equal lengths on each side.seems a lot easier than this way.
Thanks Carl that was great😊
Awesome video, good tips on the spool and you seem like a good guy
good job explanning ,thanks
Very good...👍👍
You can take a torch and get that arrestor white hot , clean off and is good as new
Ours floods all the time and its a PAIN to keep it running
Those heads are the only ones that keep working properly 👍🏼
Stihl makes great weedeaters for sure but sloppy head for their weedeaters.
Can you get a steel brush cutting blade for the FS38?
Are there any aftermarket speed feed heads that fit it. It’s entirely too small and doesn’t hold enough line
Yes. Freely available.
I have a fs38 the pull string snapped went to replace it as soon as I went to replace it the.spring underneath the housing uncoilled can you do a video on recoilling it or advice to do it thanks
So you pulled off the rope pulley? Mistake number one. Recoiling the spring can be fun. Maybe just buy a new spring. Your fingers and patience will thank you
Josh do you write with your right hand or left hand
Can I fit an echo 400 on here?
Nice
Hi Josh, I was wondering when do i change the filter and the spark arrestor?
When operating properly you may never have to change spark arrestor I would recommend changing the air filter every year or two depending on how heavy of use
Every year
Bumping the trimmer head. As the head is cutting, the width of the cut is seen. When that width gets smaller, it is time to bump the head to allow more string to be released, widening the width of the cut. No need to "time" oneself.
Funny just bought one and it started but won't let me rev it up cause it dies, the guy at the shop said I'm pulling the throttle too fast and I need to slowly build the RPM... no matter how slow I pulled it the thing would die. So now I have to take a BRAND NEW whipper snipper (line trimmer whatever your country calls them) to get serviced
I would say it needs a small tweak on the carb adjustments
Mine does the same thing, bought this summer. I have also seen a couple for sale on Facebook marketplace with the same problem.
Can u put a speed feed head on it
Not an Echo Speedfeed. But Stihl has their own.
@@Carlsmower cool can u put 3mm line in it
@@diesel_man99 No line that diameter will generally require a head did you put strips of line in. If you’re looking to run heavier line why not go up to the straight shift machines?
@@Carlsmower I want a low power machine with strong line. I'm bored of changing line cause it keeps braking every 2 mins when I hit anything thick.
@@diesel_man99 have you tried the Stihl CF3 line?
I mow in one piece for an hour, at most an hour and a half, but it happened that the original head overheated at the nut and melted completely, and I could barely get it off the shaft to replace it! Is there a time limit for mowing, or is something else wrong? The trimmer is one year old and barely used!
Did you per chance remove the “guard”?
No ! At dealership they said, the inside bearing was destroyed....!
@@TheJanez59 the reason I ask is because generally the only reason I see the failure of the bearing at the bottom is because of the guard is removed, and the clamp on the bushing is relieved and therefore ruins it
I purchased a FS 38 last year and it is a great machine. But my yard usually takes 2 string refills. I am looking for an easy load head for my FS 38; one where you feed the line in and twist the head to suck the new line in. (Like the newer FS 40 does) Does Stihl make a replacement head for the FS38 that does this? If so can you supply a part number?
The FS40 head will fit the 38
@@Carlsmower Thanks for the information! Great news!
@@Carlsmower Yes I have bought on for my FS38 and now have both heads
what is the model of the trimmer head that you have on this fs38 ?
Autocut 5-2
what do you mean by 'bump'?
Tap head?
Called taping it on the ground not rocket science
I CANT EVEN GET THE DAMN KNOB OFF JOSH! 😭
I can see why a really good cordless electric trimmer will make these puppies obsolete.
premixed fuel such as moto mix is very, very expensive. i have a quart of lucas 2 cycle synthetic blend and a mixing cup i bought off amazon. i do 50:1. i have a fs38 for light work and a fs90 i bought years ago for the heavier work.
The reason for pre-mix is shelf life of fuel. Lucas oil with pump gas will work but the gas starts degrading fairly quick.
@@Carlsmower so if you are particularly worried about it, maybe buy a can of pre-mix and at the end of the year dump the gas out and fill the tank with premix. start it and run it for a few minutes.
i cant see using a fuel that costs over $30 a gallon as a primary fuel...... if you actually use the machine for any amount of time.
@@andrewdonohue1853 That’s usually what I recommend doing
2:23 Tremor?
I can’t start mine please anyone tell me
When did it last run? How many pulls have you given it on choke?
Hola yo quiero una Sthill liviana que corte el césped y pequeños arbustos cual me recomiendas gracias
English only
I thought the fs38 came with the autocut c6-2 head.
Currently it does not. It used to
im a shorts and sandal kind of wipper snipper
the sting hurts good.
The sting isn't the problem. I'll gladly take a rock or string. It's the poison ivy that's killer. Even if I don't intend to hit it, I've been met with the mist of death and 2 weeks of torture.
Anyone have any tips for this? Because we’ve taken our fs38 to the dealer multiple times, paid way to much in “repairs” and it’s still the biggest piece of crap I’ve ever had the misfortune of owning.
Im one of those 5. My Seihl is not like your's. I put it away or go to a mental hospital! And my Seihl is is differen
I think with most trimmers the string breaks allllll the darn time.
With a decent trimmer head good trimmer line and an understanding of the mechanics of the line head they really do work pretty freaking flawless. But when things don’t work it is a pain in the……
My spool looks the same, but doesn't have the holes next to each other. There are 4 holes. It's the dumbest system I've ever seen!
The engine seems decent. Everything else is rubbish. The easy feed head is probably the worst design ever. The line continuously gets stuck inside the spool if you load more than ±2m and that is rediculous. I have taken it to the two agents in my area and they both gave up. Two replacement heads later and it is stil rubbish.
Any weed Wacker that needs that much work to put new string on it belongs in the trash 😂
There are options for the line head for those who dislike the bump heads.
Nah
I thought I'd purchased the Stihl FS38, but it turns out I bought the Stihl P.O.S.
Lmao
The auto cut c-6 head is a Complete piece of crap
Bro stop over complicating this lol thanks ..
Trying to make it simple. There are always different skill/experience levels
@@carlsmowerandsaw never mind me. Thanks again
@@CarolinaBreed123 all good 👍