Long Splice

Поделиться
HTML-код
  • Опубликовано: 15 сен 2024
  • © 2008 Minister of National Defence / Ministre de la Défense nationale

Комментарии • 37

  • @williamwallace9826
    @williamwallace9826 3 года назад +6

    This is the best instructional I have seen on making a long splice since I was taught marlinspike seamanship by an English sailing instructor in Maine (USA) in about 1960. What you omitted is that synthetic rope is more slippery than hemp or manila rope, so the length of the overlap needs to be increased accordingly. And a long splice is NEVER as strong as the rope it is made in, which is why the short splice should be used wherever possible.

    • @maigretus1
      @maigretus1 Год назад +1

      Actually, the short splice isn't as strong as the rope either, but it is stronger than a long splice.

  • @frankgraham3490
    @frankgraham3490 Год назад

    Nice, thank you,enjoyed,l put the half tails in centre of rope. Makes me happy you have the right terminology for splicing.From an old wire & fibre rope splicer, thanks.

  • @samone1757
    @samone1757 4 года назад +1

    Excellent! Just what I was looking for. This will make my project look seamless! Thanks!

  • @Davidf1_E39
    @Davidf1_E39 Год назад

    Perfect!
    Exactly what I need to fix my ski lift rope.
    Many thanks!

  • @ken2633
    @ken2633 2 года назад +2

    How much of the rope strength is lost with long splice? I thought of using it to extend my anchor rope. I believe the size of my rope is more than enough for the size of my boat hence lost of some strength from long splice shouldn't be an issue.

  • @johnbarrell9110
    @johnbarrell9110 Год назад

    Thankyou for a very clear description of this process, it was very helpful.

  • @raykennedy1249
    @raykennedy1249 Год назад

    I was a wire rope splicer rigger for 18 years this brings back memories

  • @thomasklugh4345
    @thomasklugh4345 10 месяцев назад

    Simply amazing... thanks!

  • @actuallypaulstanley
    @actuallypaulstanley 3 года назад

    Nice and clean result. Have taken over as a bell tower maintenance and have a workshop booked so researching how to splice ropes; both long like here and short splicing. Much cleaner result with the long splice shown here, will work with the movement of the bell rope through the various ceiling/floor openings between the Sally and bell framework.
    Thank you.

  • @PauloJFMartins
    @PauloJFMartins 8 лет назад +3

    Excelent video and a nice trick.

  • @3pipper
    @3pipper 8 лет назад +1

    Excellent basics and fundamentals, good basic understanding and starting point for a person who has no knowledge of doing such a task. Thanks very much for your time and I can not wait to get some waste rope and practice God Bless and good luck cheers Les 🙈🙉🙊

  • @flyingfox10001
    @flyingfox10001 3 года назад

    Very good, I learned this pro fishing when I was 16 years old.

  • @marlenelampard6791
    @marlenelampard6791 4 года назад +2

    Now i know how and what a long splice is..thanks...

  • @antoniocarlosbarbi1563
    @antoniocarlosbarbi1563 3 года назад

    Muito bom o vídeo. Mostrando um profissional muito competente em se tratando de emendas de cordas. E é também um ótimo professor da área, do assunto relacionado à cordas.

  • @Forrest-Jackson
    @Forrest-Jackson 10 лет назад +3

    Nice camera work, voice over, and information- but you could edit this down to about 4 minutes and "the cutting room floor" wouldn't cry ;-) Thanks for posting!

  • @edwinmelnik247
    @edwinmelnik247 6 месяцев назад

    Didn't roll so smoothly thru the Pulley 😮

  • @TomTholan
    @TomTholan 5 месяцев назад

    What are you doing, if you have a four strand rope?
    You also leave one in the center or you twist two to the right and the other two to the left?

  • @PauloJFMartins
    @PauloJFMartins 8 лет назад +3

    The comments on the last three tucks should have started at the first tuck and not at the last one.

  • @davidlebenstein9059
    @davidlebenstein9059 Год назад

    Thanks for the helpful video. How do I splice a very soft rope? It doesn't seem to go well with this method.

  • @ankurjoshi9217
    @ankurjoshi9217 3 года назад +1

    Same procedure for rope way steel cable splicing?

  • @irinafeldman1979
    @irinafeldman1979 Год назад

    Good

  • @andersonbicalhodesouza3588
    @andersonbicalhodesouza3588 4 года назад

    Dei um like, parabéns 👏, pelo vodeo

  • @izarbeleuskadi4751
    @izarbeleuskadi4751 9 лет назад +2

    Super, good job

  • @ateequrrehman8765
    @ateequrrehman8765 3 года назад

    I try this on wire rope .but not working .it slip very easy..

  • @johnparker245
    @johnparker245 8 лет назад +2

    A lovely video, spoilt by lots of silence.
    When training people, pretend that they are 3 years old and tell them everything you are doing and why. Pointing your fingers as an example means very little, unless the people are mute and understand sign language. Look up the word Pedagogy... I enjoyed the video, Thank you.

  • @superclue
    @superclue 4 года назад

    1:53 3:46 5:39 7:32 9:25 11:18 13:11 15:4 16:57

  • @MrDouglaswalters
    @MrDouglaswalters 10 лет назад

    I really do not think so wire rope can slip very easy and i watch a guy do it on my boat and he did it another way,, try to find a video on how to do it right because you can get hurt very badly if not killed if it comes apart,, good luck and be careful.

  • @ngovinhtuong
    @ngovinhtuong 3 года назад

    Do complete just one is enought, two remain same. Don't do three all, waste time!

  • @petermetcalf3473
    @petermetcalf3473 4 года назад

    B

  • @大食い太郎-q9x
    @大食い太郎-q9x 3 года назад

    素晴らしい( ´∀` )b!