H-KING 1400mm “FRENZY” PNF Aerobatic Sports Plane From HobbyKing With Lights
HTML-код
- Опубликовано: 26 авг 2024
- Unboxing the 1400mm H-King PNF “FRENZY” sport plane. Thanks for watching, and get yours here:
hobbyking.com/...
The incredible Frenzy is the perfect all-rounder. With reduced control throws it's a smooth, stable, and remarkably easy to fly plane that is perfect for the novice or beginner. Increase those throws, and with its high power-to-weight ratio on a 3S set-up, the Frenzy lives up to its name. It is capable of a wide range of amazing aerobatic maneuvers and will meet the demands of even the most ambitious aerobatic pilot.
Constructed in durable EPO foam with carbon longerons in the rear of the fuselage, and a plastic cover to the nose, this superbly molded airframe is not only very light and stiff, but it's extremely tough too. The large diameter wheels and wide taildragger-type landing gear coupled with the tough airframe make the Frenzy ideal for operating from those less-than-perfect flying strips. Also, it is great for doing one-wheeled touch-and-go's.
The Frenzy is supplied "Plug N Fly", it has 2 x 9g servos on the ailerons, 2 x 17g servos, one for elevator and one for rudder, a 40A brushless ESC, and a powerful 3720-850kv outrunner brushless motor, all items are factory installed. Also included is a carbon wing joining spar, chrome finish spinner, a factory-applied high-viz color scheme, and a set of bright LEDs pre-installed in each wing tip. You will need to supply your own transmitter, receiver, and a 2200mAh 3S (11.1V) LiPo battery.
The Frenzy offers a stunning combination of terrific looks and sensational flight performance. If you are looking for a quick-to-assemble, tough, durable, fun sports plane with plenty of power, then look no further than the H-King Frenzy.
Features:
• "Plug N Fly" with pre-installed powerful brushless motor, brushless ESC, servos, and bright wing tip LEDs
• Manufactured in tough, durable EPO foam
• Lightweight, strengthened hollow wing and carbon reinforced fuselage
• High power-to-weight ratio on a 3S set-up
• Wide aircraft-grade aluminum landing gear with large diameter wheels
• Supplied with a chrome finish spinner and a pre-applied high-viz color scheme
• Quick assembly, minimal gluing required
Specs:
Model: H-King Frenzy EPO Aerobatic Sports Plane
Type: Plug N Fly
Wingspan: 1400mm
Length: 1130mm
Weight: 1480g
Wing Loading: 40.3g/dm2
Motor: 3720-880KV brushless
ESC: 40A brushless
Servos: 2 x 9g (ailerons), 2 x 17g (rudder/elevator)
Battery Required: 2200~2400mAh 3S (11.1V) LiPo (not supplied)
Included:
1 x H-King Frenzy airframe manufactured in EPO
1 x 3720-880KV brushless motor
1 x 40A brushless ESC
2 x 9g servos
2 x 17g servos
1 x 11x7 propeller
1 x Prop adapter
1 x Chrome finish spinner
1 x Set of wing tip LED lights
1 x Hardware pack
Required:
1 x 4~6ch Transmitter
1 x 4~6ch Receiver
1 x 2200~2400mAh 3S (11.1V) 40C or greater LiPo battery
1 x Suitable LiPo battery charger
Please note: A copy of the assembly manual is available under the "Manual/Files" tab
Thanks for watching and get yours here: hobbyking.com/en_us/h-king-pnf-frenzy-epo-aerobatic-sports-plane-w-led-lights-1400mm.html?affiliate_code=BCXJZWQPHCOKKYP&_asc=7448281751
Great job Jeff and Wayne
Looking good Jeff and Wayne! Can't wait to see her up up and AWAY! 👊
Thanks Ken, hope things are getting better for you, missed ya at the flyin 🙏🏼
Looks like hobby king is getting better and better.
Yes they are👊🏼
Great job! The studio looks awesome. Love the 80s graphics on this big boy!
😘 love ya👊🏼
Put ours together last night. Not bad looking ride
Looks like a great bang for the buck flyer with lights, well done H-King Jeff in LA USA
Thanks LA JEFF👊🏼👊🏼
Its copy of max thrust riot
I bought this plane and am very pleased with it. It would make for a good second plane for those coming off an Apprentice or the like.
In researching this plane, I found that it appears to be an updated version of this plane: ArtTech Devil, Horizon Hobby Aire-Batix, or TopRC Hobby Riot, so it has been around for some time.
Yes…it’s a great plane indeed, I switched out the esc to a 60 amp, and now fly it on 4’s, WOW!!! What a difference, thanks is for watching 👊🏼👊🏼
My Frenzy was delivered today. Looking forward to a lot of with this plane. Thanks for showing how to put it together.
Definitely!!…it’s a great plane and flys well on 4’s
Don't forget to glue the wooden between two wing and don't forget to slide that carbon fiber rod. Also there two of the plastic on top i glued them in but damn hardly any room inside the carpartment where two servo, receiver and all that wire goes in. I'm afraid wire might tangle up with servo arm lol. I was going to use Radio Master 8ch but to big I order 4ch and a 6ch. For now Wfly receiver for my Radio Master Tx16s.
@@rcrotorfreak I used a Spektrum AR636B receiver out of an old plane. It has the AS3X and SAFE stabilization. I am surprised by how powerful the Frenzy is on 3S. It's a lot of fun to fly but really has to be trimmed right. I'm going to program in flaperons to make landings a little slower.
That looks like a fun one!
Right on man👊🏼
Looks like a fun one Jeff!
Thanks man!! 👊🏼👊🏼
Wayne is my favorite!
Yeah…I fed him just once….and now it’s like I can’t get rid of him 🤣🤣
@@JeffsCustomRC 😂😂😂
I start making .25 more an hr and family shows up!😂😂😂😂❤
great info!
He said he will allow me to fly this one….He must be low on his MEDS!
Your up man👊🏼👊🏼👊🏼