I used to have a tiny drill like this one. But once it broke I started using normal hobby screwdrivers, but now, thanks to your video I've started missing my drill jeje. Gotta get one now, Amazon, here I come. Cheers mate, nice video.
Sometimes it's just nice to push a button! 😄. Nothing wrong with a screwdriver and for a job where you need plenty of accuracy can't beat the MK1 hand. It is alot quicker though! 👍👍
Great review. And you are right. We need some tools reviews as well. I personally use Lidls branded electric screwdriver. And it's been fantastic for what is needed in RC hobby. Same as Ryobi li ion 4V. Thanks for new content. 👍🏻👍🏻 Keep wrenching from Scotland🏴🏴
I was just talking to another chap who commented. I replaced my Lidl Workzone drill/driver with the Ryobi after the clutch exploded. I haven't a bad word to say about Workzone drills. It took a right beating and for the money I cannot fault it at all. 👍
I don't think you could go far wrong with this one. There are lots of other out there proberbly very similar performance, they do make life a little easier I must admit. 👍
I use a cheap workzone drill driver and it's actually my go to when I need a drill also! Xiaomi make something called a wowstick have you seen those? Look perfect for RC. People with fpv drones use them a lot. Nice video dude 🤘🏻🤘🏻🤘🏻
I had a Workzone drill/driver which took a right beating before the clutch exploded! For a cheapo drill I cannot fault it. The two battery's were still mint, I stuck em on eBay and sold em for more than the drill cost me! Try that with another brand. That's how I ended up with the Ryobi drill to replace the Workzone. I have heard of those Wowsticks actually, and heard some good things. The Ergo seems to do the job, but you do have to be bloody careful which rotation the switch is set too. After filming I accidentally tightened a screw instead of removing it and snapped the head straight off. 😞.
@@theminiatureconstructionco4556 Doh! 🤣 Yeh you got to be careful with powered drivers. I've stripped so many threads with mine 🙄 had my workzone for at least 7 years I think 👍🏻
Nice little drill, I was shocked when you drove the screws into a piece of lumber. 👍 I’m shopping for a screw/hex extraction bit. I have some stripped grub screws I don’t want to drill them out and ruin the threads.
@@theminiatureconstructionco4556 HaHa not this time, I have one stuck WPL axle grub and one on my RC boat drive shaft. They have many different extractors for screws but I’m trying to find a small bit for hobby stuff.
I bought one a year ago called an Enertwist. It's one of the most useful tools I've ever bought, also works great for RC as it has adjustable torque.
Yes I love mine! Use it practically every day! 😄👍
I used to have a tiny drill like this one. But once it broke I started using normal hobby screwdrivers, but now, thanks to your video I've started missing my drill jeje. Gotta get one now, Amazon, here I come. Cheers mate, nice video.
Sometimes it's just nice to push a button! 😄. Nothing wrong with a screwdriver and for a job where you need plenty of accuracy can't beat the MK1 hand. It is alot quicker though! 👍👍
Great review. And you are right. We need some tools reviews as well. I personally use Lidls branded electric screwdriver. And it's been fantastic for what is needed in RC hobby. Same as Ryobi li ion 4V. Thanks for new content. 👍🏻👍🏻 Keep wrenching from Scotland🏴🏴
I was just talking to another chap who commented. I replaced my Lidl Workzone drill/driver with the Ryobi after the clutch exploded. I haven't a bad word to say about Workzone drills. It took a right beating and for the money I cannot fault it at all. 👍
Thanks for taking the time to comment! 👍
Tip. Instead of a extension bit, use longer bits. Look at Talbot. He uses the longer bits
Noted. 👍
They are a lifesaver when stripping and rebuilding beadlock wheels,especially those ones that have 24 bolts/locking ring.
I bet! Yes it's proving itself of use. 👍
My one is just a cheap Amtech 3.6V one,but it does the job.
@@semperatis nothing wrong with some of these cheap power tools. I had a Lidl brand drill before the Ryobi and it lasted years! 👍
Great review video! I'd been curious about possibly acquiring one of these drivers.
I don't think you could go far wrong with this one. There are lots of other out there proberbly very similar performance, they do make life a little easier I must admit. 👍
I use a cheap workzone drill driver and it's actually my go to when I need a drill also! Xiaomi make something called a wowstick have you seen those? Look perfect for RC. People with fpv drones use them a lot. Nice video dude 🤘🏻🤘🏻🤘🏻
I had a Workzone drill/driver which took a right beating before the clutch exploded! For a cheapo drill I cannot fault it. The two battery's were still mint, I stuck em on eBay and sold em for more than the drill cost me! Try that with another brand. That's how I ended up with the Ryobi drill to replace the Workzone. I have heard of those Wowsticks actually, and heard some good things. The Ergo seems to do the job, but you do have to be bloody careful which rotation the switch is set too. After filming I accidentally tightened a screw instead of removing it and snapped the head straight off. 😞.
@@theminiatureconstructionco4556 Doh! 🤣 Yeh you got to be careful with powered drivers. I've stripped so many threads with mine 🙄 had my workzone for at least 7 years I think 👍🏻
Nice little drill, I was shocked when you drove the screws into a piece of lumber. 👍
I’m shopping for a screw/hex extraction bit. I have some stripped grub screws I don’t want to drill them out and ruin the threads.
They wouldn't be Wltoys stripped grub screws by any chance would they? 😨 . Absolute nightmare getting them out of pinion gears!!!! 😣
@@theminiatureconstructionco4556 HaHa not this time, I have one stuck WPL axle grub and one on my RC boat drive shaft. They have many different extractors for screws but I’m trying to find a small bit for hobby stuff.
@@sbrc8725 been there and got one of those stuck. If you come across one let me know! 👍
Great 👍👍👍~~~~~
Thank you! 👍
Hahaha great video you know Kev to !!! nice !!!
I thought everyone new kev? Hahahaha
Hahaha yeah he is like the mrbeast of rc ...heheh
Hey man you won the doo doo giveaway 🤣
Fuck a duck I never win anything! 👍😄👍😄👍
That's mint! Do you still have my address hahahaha! 😄
@@theminiatureconstructionco4556 Should be in my inbox somewhere I'll av a look 👍🏻
@@theminiatureconstructionco4556 No only goes back to December, here's my email dude send in to me 🤘🏻🤘🏻
@@ksrnate it's blanked it out for some reason. I'll try oliwestonartist@gmail.com 👍