Mounting An LS Engine Into My Toyota Land Cruiser!
HTML-код
- Опубликовано: 14 окт 2024
- LS Swap Mounts: avrcustoms.com...
Motor Mount Bushings: amzn.to/3lvz8fb
Where I buy parts:
amzn.to/3B7SKuw
ebay.us/wuVMNx
Sponsors/ Discounts:
Evolution Power Tools: "ANIEMELA" aspireiq.go2clo...
PerformanceTDI: "AUSTIN10" at performancetdi...
EcoFlow: amzn.to/3Uw0mO7
Atoto: amzn.to/3Y0Khms
www.prismaticp...
www.cerakote.com
Check out my website! avrcustoms.com/
Follow me on Instagram! / austinniemela
Camera equipment used in the video!
Sony ZV-1 Camera: amzn.to/3N0SksQ
Rode Mic: amzn.to/3OnQUKw
GoPro: amzn.to/3ty94RJ
Tripod: amzn.to/2WjasJM
Send me stuff!
PO Box 133
Chattaroy WA 99003
Your builds are just absolutely superior and legit! Love the content! *like button smashed*
Thanks man!
Austin... The fabrication skills are steppin up bro ! Nice work
Thank you!!!
Hope you feel better quickly. Your fabrication skills are incredible.
Thanks!!
I used hooker 8501HKR cast manifolds on my 80 series ls swap. They hug the block pretty well and most 80 series swaps use these to give them clearance. I also used a later year water pump on my LM7 (I used ACDELCO 252901). The output to the radiator is shorter and doesn't interfere with the air intake piping. Not sure if that tip will help on your layout but incase you needed extra room for your intake piping. Excited for the build!
Sweet thanks for the info! I think I'm going with hookers, seems like the best fitting manifolds!
Did you find a good fitting upper hose? I bought the same pump I have now, but looking at it I might but the one you listed! That’s 07+, they bolt right up to the older 5.3’s?
@@lsswapped80 awesome! And no spacers needed?
Not sure why I don’t see my reply to the upper radiator hose but I believe it’s the factory Silverado hose that came with the engine swap. Lower hose on my setup I used an explorer hose that needed a little trimming. No spacers on the pump. Everything lined up.
@@lsswapped80 awesome thank you! That’s going to help a lot!!
Awesome build! Your skills blow my mind and keep growing and growing !
Looking great man.... that little plasma table has already proved it's worth! Hope you get better quickly!
I like this build. Looking forward to watching this series.
Forever wishing I could have Austin rebuild my ‘86 SR5.
Cool project man, hope you feel better
Looking good, hope you feel better soon!
another awesome build Sir, get well soon!
Thanks, will do!
This Cruiser gonna be insane 😮
Excellent progress
Looking good Austin 👍🏼 u have set yourself up for success with that plasma table and fab table. Everything is going super smooth 😎🔥
Thanks! I am really enjoying the table!!
P.S. drink lots of pineapple juice for that strep, it helps me out a lot 👌🏼
Watching this with strep myself… loving the series so far. Get well soon
Dang it’s going around right now! Get better!!
Get well my friend.. loving this build!!
Thanks 👍
This build is going to be wicked I'm telling you!
Already fired up to see the next installment of this build.
Love ya work 😁👍
Cheers from Sydney Australia MATE
🇭🇲👍🦘🇭🇲🇺🇸🇭🇲🦘👍🇭🇲
Glad your enjoying it! Thank you!!!
Coming along great...love the process! Cutting your own headers?
Prayers for Healing Austin
I'm excited for this build. It's going to be bad ass!
Love those custom made mounts...
The longer the shaft the better!
That’s what she said!!
Your not messing around welding stuff already!
This channel deserves 10 x subscribers.
Borat voice "great success" 🍻 I love it
Get better soon dude. I just had something similar and it's no fun! Fj is looking amazing!
Thank you!!
I think you can get a more accurate engine/pinion angle measurement by putting a straightedge across your crank pulley and putting your angle finder on the straightedge.
Hope you feel better soon brother 🙏🏼☺️
This is going to be awesome, Hope u feel better.
Hope you feel better soon!!
Never been a fan of land cruiser but I can't wait to see your magic on that toyota!
Hope you get well soon bro ! 🤙🏻🙏🏻
I’m swapping FJ80 axles over onto my 1st Gen 4runner with an LS th350 swap. I’ll be following along on your build
Great video as usual Austin.
The Fj is one of my all time favorites and I know yours will be over the top !
Looking forward to the next one.
I'm guessing there is an axle swap coming up since the transfer case is left side drop and the front pumpkin is on the right.
Feel better soon man, strep throat sucks but with meds you’ll be better in no time!
Great work have a question I also have plasma cutting table. Would you be able to let me know what computer you're using
LS motors may not vibrate as much as diesels but the poly bushings will still cause vibrations. I would go with rubber or hydraulic if you can.
Really enjoying all these builds. What is the music you use?
The mongrel seems like the proper name for this vehicle.
I was thinking toylet 😂
Those seats look like they mount high enough for you to put storage boxes of some sort under the seats. Looking great so far. 👍 Get well soon!
For headers hooker makes some good cast manifolds that hug the block.
Good to see some quality building happening.
I actually just picked up the hookers!! Thanks!
bonito trabajo elque estas aciendo
this is going to be a nice build
If you knew more about LS's you know how absolutely phenomenal your luck is, not breaking any exhaust manifold bolts. Huge 👍
He does have broken bolts. I've had good luck welding a washer and nut to the bolt.
97-04 Corvette "batwing" oil pan are about as shallow as you're gonna find if you need even more clearance.
Would that be okay for offroading? Say for hill climbs? Feel like the oil pick up may be an issue.
Great job mate, keep up the good work
Love this build so far, I have this exact project (1971 FJ40 with a 5.3 and 4L60E) in my shop sitting for the last 4 years. Your fast progress has given me the motivation to get back on it! As others have mentioned, Im curious what your plans are for the front axel due to your choice of t-case?...Im sure you have a plan already maybe an axel swap or possibly an axel housing flip? Look forward to your next video!
Any chance you would be offering those engine mounts in a DIY/weld-up-yourself kit? They look 100x's better than anything I've seen for sale online!
Absolutely! Email me austin@avrcustoms.com!
@@austinniemela Left you a message on your website...thanks!
@@Nacho_71 weird I’m not seeing anything! Did you get the email address correct?
@@austinniemela I tried the email again, I hope it went through... thanks!
looks like alot of fun! wish i got time
I can't believe how clean those frame rails are. Geeze
Great job. This FJ going to be sick. Can't wait til next video.
Get Well Soon Bud.
I vote for you keeping those wagon wheels. Maybe powder coat them white again and keep them!!
Do you plan to put any heat shielding in between the trans tunnel and transmission?
My favorite series by far bro. These have always been my favorite trucks
Hope you get well soon.
Looking pretty damn good!!
Nice job
Looks sick man, how were you driving the truck into the shop with no engine?
The Chassis need a clean freshup,Gotta be a clean build for the FJ(paint and everything)
Looking awesome!
If you go poly engine mounts, go poly trans mounts too (or rubber/rubber). Mixing can tend to stress things.
Man been waiting for this can't wait to see what you got in mind for this one
Great video... hope you are feeling better soon. Get well soon... a little tea and honey with a shot the good stuff... for medicinal purposes. That get you feeling better.
Take care of yourself first and we'll be looking forward to seeing what's next.
Thank you!!
@@austinniemela Your Welcome.. get well... fix another medicinal drink and toss a log in the fire.
GET WELL SOON.
I will thank you!!!
Looking great. What welder do you use?
Thanks! I use a Hobart 210MVP!
@@austinniemela thanks. I'm going to be shopping for a new welder soon and have been asking around about what people are using.
Great channel
The longer the shaft the better angle. 100%
👍🏽🇺🇸👍🏽 should be awesome
Looks like you’d be better off cutting that whole floor pan out and bending/welding up a new flat floor pan. It’s a bit crusty. I’m sure you already have a great plan
What respirator filter do you use for welding?
like it so far 🖐
You the real MVP
Change the accessories to the Corvette accessories you gain 1.5” on the front.
👏👏👏👏👍👍👍👍👍👍
Nice motor mounts! Get well soon. It's still cringey to call it an "FJ". :( "forty" is a fair compromise.
All those metal working tools and the welding skills and you can’t fab up some custom fit headers?? Next level bud!
Yes!!!! New episode!
Like it
Can you do a garage tour or a toyota tour
real trucks dont shift themselves 👍
Amen!
This will bother me if I don't ask, will you be replacing the missing bell housing bolts?
I'm sure you will, but if you don't mention it, I'll be wondering this entire build, "Did Austin replace those missing bolts?" And it will bug me haha
Comment algorithm compliance
Great motor mount can I buy a set or two???
Yeah I could cut some up for you guys! Would you want both the motor side and frame side? Also the bushings and dom I bought from Barnes4wd. Email me! austin@avrcustoms.com
@@austinniemela yes I will
@@PeterHatch-mx7zc did you email? I’ve had a few people say they emailed me and I haven’t got anything!
The longer the shaft the better the angle... thats not what she said lmao😂
An LS with broken manifold bolts all the way back on both sides, I’ve never seen that before said nobody ever 🤣🤣
Bro like the way you make videos
But you need to make them litil bit longer like 25 min this video is good but others video are you can make them longer
лайк авансом!!!
Paul with fan rats and you have the same thing going on with the FJ
Your diff are passenger trow, your transfer is drivers trow how are you manege that
I am wondering the same thing.
I noticed that too, probably doing an axle swap would be my guess.
bluetooth driveshafts!!
Check out Fabrats put a LS in the same truck so it may help you out they are on he has a channel on U tube
Why not use a Toyota motor from new LC models?
🇮🇶🌹♥️
now your talkin, good choice . you should have put one in the hilux😜
How many times can Austin say “tranny”….176 lol
What engine is
a boring project equal to the thousands of internet, toyota chassis with toyota engine is the best.... 1uz, 2uz, 3uz
Bro if u ever came to hawaii you would probably make a load of money with your own shop guys over here love Toyotas especially all the straight fronts you builds
I try again I put my email in thks
I put my email in comments and I emailed you on yours
Sorry man I don’t have your email still! What’s your email address? I’ll try to send one to you!