Astra H Gearbox replace

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • Astra H gearbox broken
    gearbox replaced
    clutch replaced
    release bearing replaced
    My Instagram
    / the_driveway_experiment

Комментарии • 46

  • @falsehood3314
    @falsehood3314 2 года назад +7

    Even skilled mechanic will be struggling to carry out this job on drive way, well done

  • @northfolk6991
    @northfolk6991 2 года назад +2

    Ouch... I mean good job for taking the sub out, but that's a helluva lot of work. Best to invest in a 1 ton engine hoist, I did, never looked back ;)

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад +1

      I don't think there's much between the two if I'm honest, apart from lining up the frame, but the correct procedure is to remove the sub, however I see you point if you have a crane could clean up the engine nice while you there.

  • @anthonygaunt8974
    @anthonygaunt8974 2 года назад +1

    Your unreal lad well done🤗

  • @DanielMetcalfe-cn4rz
    @DanielMetcalfe-cn4rz 2 месяца назад

    Hello buddy I don’t know if you can tell me ? I’ve got a zafira b and I’m replacing the back engine mount (gearbox ) and I’ve noticed the bolts are tricky to get too , can this be replaced frond under the car ?

  • @noelpeterson5591
    @noelpeterson5591 2 года назад

    There is no need to completely remove the subframe. You just have to loosen the bolts to gain a little more space which will be enough to remove the gearbox.

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад +1

      I'm just following the vx instruction mate I'm betting there are easier ways.
      Still need to disconnect the ball joints and ties rods and drop links so for the sake of extra room lying in my back on the drive the subframe removal was worth it

    • @noelpeterson5591
      @noelpeterson5591 2 года назад +1

      @@TheDrivewayExperiment Yes true, that's a good point.

  • @tumimasete2963
    @tumimasete2963 Год назад

    Hi, my gearbox has a rattling but when you press it goes quiet. What could be the problem. I'm not sure if gear oil is low or the release bearing is dead?

  • @leeneilson1613
    @leeneilson1613 2 года назад +1

    Hi Ive got a problem with my car hopefully you can help.. When driving I get a growling clicking noise coming from wat I believe is the gearbox or diff or final drive area it sounds like a bad wheel bearing to be honest.. But when I'm driving a dip the clutch the noise goes away would you say clutch or gearbox ..it's a 1.8 petrol vehicle zafira and I belive its the f17 box she's got..

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад +1

      So it's limited to the drive train, are you sure it's coming from the gearbox?
      If it were me I would lift the drive wheels off the ground and run the car and try to determine where the noise is coming from exactly

    • @leeneilson1613
      @leeneilson1613 2 года назад

      Hi ye I've done this and it sounds worse and does sound like coming from gearbox area.. Car goes in for mot on Friday.. I want to say wat happens there before I buy gearbox or clutch..

    • @leeneilson1613
      @leeneilson1613 2 года назад

      I forgot to mention in first there is no sound but once up to speed and go from first gear sounds starts I've also done the 5th gear test and she passed that

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад

      @@leeneilson1613 have you checked the gearbox oil level? And the old fluid for metal flakes chunks etc?

    • @leeneilson1613
      @leeneilson1613 2 года назад +1

      Hi mate yes I checked it.. It was low so topped it up and yes there was crap on the magnetic bolt.. I've been on with car today and I've had both front wheels off with car in drive noise seems like defo gearbox..

  • @PaulHumphries-v7s
    @PaulHumphries-v7s 10 месяцев назад

    How did you get linkages off the top of gearbox please? I can't pop the the second one off I've tried everything

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  10 месяцев назад +1

      Hi mate which are we talking about?
      The link is a quick release pin and the mount on the gearbox I can't remember think it just screwed in, see my 2nd video I had to bodge it as the hole in the box was knackered

    • @PaulHumphries-v7s
      @PaulHumphries-v7s 10 месяцев назад +1

      @TheDrivewayExperiment I've done it now I was about to give up and remembered I had a crowbar which popped it right off it was just am awkward angle , thanks for your reply though:)

    • @PaulHumphries-v7s
      @PaulHumphries-v7s 10 месяцев назад +1

      Liked and subscribed 👍

  • @leeneilson1613
    @leeneilson1613 2 года назад

    Hi mate me again well the car passed her mot last week so didn't need to do rear bushes after all... Anyways I'm going to do my gearbox this weekend but not sure how much oil I'll need.. I've read its 1.6 liters does that sound write to you..

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад

      Nice one mate, saves you a big job!
      Yeah it's 1.6ltrs mate

    • @leeneilson1613
      @leeneilson1613 Год назад +1

      Hi mate sorry it's been a few weeks but I changed my gearbox and cluth and that it's been 4 weeks now.. Wow car runs much better now.. Thank you for your time to reply..

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  Год назад +1

      @@leeneilson1613 brilliant news mate nice work 👏 glad to help

  • @lukethurston8073
    @lukethurston8073 2 года назад

    Have you got the torque settings for clutch ?

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад +3

      Yes mate
      Pressure plate retaining bolts for 1.4 to 1.8 petrol
      M7 = 15nm
      M8 = 28nm

  • @722basil8
    @722basil8 11 месяцев назад

    Mate, I have a absolutely terrible VERY loud clicking noise from my Astra 2009 when car is in idle and you fully press the clutch pedal. It’s had a new clutch about 2 months ago now. It’s doing my head in as I genuinely can’t find any help! Any ideas

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  11 месяцев назад

      Is it a hydraulic clutch? Was the clutch release bearing replaced when the clutch was done?
      Sounds like a bad release bearing possibly

    • @722basil8
      @722basil8 11 месяцев назад

      @@TheDrivewayExperiment genuinely I don't know if it's hydrolic. I think it was the sound isn't coming from the clutch side. Mate it has everyone baffled as to what it could me. I'm wondering if it need gear box oil or diff oil . But I'm not sure 🤯🤔

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  11 месяцев назад

      @@722basil8 does it drive in every gear fine without any noise?
      Is it only when clutch us depressed?
      Could be release bearing or clutch not aligned properly, also have a check of the hydraulic fluid level under the bonnet (brake fluid resiviour)

    • @722basil8
      @722basil8 11 месяцев назад

      @@TheDrivewayExperiment brand new clutch fitted. Think it might need a new gear box. Sounds like a bearing inside gear box

    • @johnbower
      @johnbower 9 месяцев назад

      @@722basil8 Some of these cars have a dual mass flywheel, after about 100k miles they are knackered, they tend to rattle a lot when engine is ticking over but when you press clutch pedal it goes quieter, this should have been changed when you had the clutch replaced.

  • @nicolaeparaschiv6599
    @nicolaeparaschiv6599 Год назад

    More work from this clutch

  • @cornelisemail6070
    @cornelisemail6070 2 года назад +1

    F17 gearboxes are very bad after 56000 miles they already have play on the diff
    It was the years 2004 til 2011 that they used cheap parts ( Germany ).
    I'm so done with Opel / vauxhall
    Better buy a 90's model those gearboxes can go til 218000 miles with no problems or oil change ( Vectra b 1997 ) my experience.

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад

      Ah I see, yeah I see so many of these gearboxes failing they don't seem very strong.
      I agree I would like an old style vectra myself I think they look alot better too

    • @cornelisemail6070
      @cornelisemail6070 2 года назад +1

      @@TheDrivewayExperimentthanks for the reply , you did a good job replacing the gearbox 👍🏻 I replaced my clutch from 2006 1.6 astra, but now need replace the gear box and I just hate it to remove the subframe :(.

    • @TheDrivewayExperiment
      @TheDrivewayExperiment  2 года назад

      @@cornelisemail6070 no problem mate and thanks, that subframe is a pain your right

    • @christophersiddles5860
      @christophersiddles5860 2 года назад

      I’ve got a 1.7 cdti Astra H and my clutch has just gone and it’s never been changed it’s at 162000 miles