How To Replace Spindle Assembly on a Cub Cadet XT1 LT46
HTML-код
- Опубликовано: 28 авг 2024
- How To Replace Spindle Assembly on a Cub Cadet XT1 LT46.
Spindle Assembly - amzn.to/3O2VWic
Hex Flange Nut - amzn.to/3M58Euf
Flat Washer - amzn.to/42TiypC
Spindle Deck Screw - amzn.to/3PIJlld
Mower Blade Removal Stop Clamp - amzn.to/3K6WSPZ
Mower Belt - amzn.to/3XBD9gu
Mower Blades - amzn.to/3r9lCQF
Replace Spindle Assembly Info:
(3) Belt Cover Bolts - 8mm
(4) Spindle Assembly Bolts - 10mm or 11mm (12-30 ft-lbs)
(1) Blade Nut 24m - (70-90 ft-lbs)
Part Numbers:
Spindle Assembly - 618P09258
Hex Flange Nut 5/8-18 GR5 - 712-05134
Flat Washer - 736-3088
Spindle Deck Screw 5/16-18 x .875 - 710-06322
I replaced the Spindle Assembly on a Cub Cadet XT1 LT46 Lawn Tractor.
This video applies to many newer Cub Cadet Lawn Tractors / Lawn Mowers.
Tools:
1/2 inch Torque Wrench - amzn.to/3MdIeGB
1/2 inch Breaker Bar 15 inch - amzn.to/3MDhEs3
Mechanic's Tool Set - amzn.to/2STiuFw
Milwaukee M18 Fuel 1/4 Hex Impact Driver - amzn.to/3wNUgPx
Impact Socket Adapters - amzn.to/38vJRj1
METRIC 1/2" Impact Socket Set - amzn.to/2wsmuUO
METRIC 3/8" Impact Drive 6 Point Swivel Socket Set - amzn.to/2xp87jW
Pry Bar Set - amzn.to/39gAZrV
Low Profile Floor Jack - amzn.to/3wmrchG
3 Ton Jack Stands - amzn.to/3Nj48XM
Rechargeable LED Headlamp - amzn.to/3aatFiQ
Knee Pads - amzn.to/3pHxAjO
3M Safety Glasses - amzn.to/3MAxv9F
----
And as always,
If you have any questions just leave a comment, I will respond!
Hope this helped someone out there. Thanks for watching!
----
TORO TIMECUTTER VIDEOS
- Toro TimeCutter Hour Meter Install - • Toro TimeCutter Hour M...
- Toro TimeCutter Oil Change - • Toro TimeCutter Oil Ch...
- How To Replace Mower Blades on a Toro TimeCutter Zero Turn Mower - • How To Replace Mower B...
- How To Replace Fuel Filter Toro TimeCutter Zero Turn Mower - • How To Replace Fuel Fi...
- How To Replace Air Filter Toro TimeCutter Zero Turn Mower - • How To Replace Air Fil...
----
Camera Gear:
GoPro Hero 7 Black - amzn.to/39vLjO6
Memory Card - amzn.to/39HqQWA
Carrying Case - amzn.to/2QJZkPD
Tri Pod - amzn.to/2QKKusb
----
#cubcadet #lawnmower #howto
Disclaimer - Affiliate Links included, As an Amazon associate I earn from qualifying purchases.
Some of the links in this description may be affiliate links that allow me to earn a small commission at no extra cost to you! This helps me keep this channel going, Thanks for your support.
This was exactly the video I needed to help me replace my spindle assembly. Thanks!!!!
You can take the deck off super easily on these. Way better than a Jack and doing everything still attached
I would agree, I took the deck off of my Toro Zero Turn in another video. It was much easier.
You're kidding me you need a spindle already on a 2022 mower... It would be nice for you to show the people how to replace the S-Series spindle with the star series... And save them a ton of money and give them a lot more choices for mower ..blades
Thank you, this helped me out alot
Glad this helped, thanks for the support!
Thanks
Went to tange my blades and the bolt turns while the blade is stopped it it making for an interesting job i for see an angle grinder to cut the nut from the blade in my future. Previous owner did a number on this thing.
Yeah sometimes you have to cut them if they won’t come off, but be aware you will need to replace your spindle assembly if you do this!
@VinnieT I took the top nut off the spindle and replaced the spindle assembly and blades
@pewspaws6795 glad to hear you got it figured out!
@VinnieT it took some work but it's all good now and is running and cutting great
Wonderful, glad to hear it! Happy mowing this season!
I hit a few rocks with my XT1 LT46 and the blade fell off, then I used a random flanged nut that didnt quite fit and stripped the bolt on the spindle. This video seems like it’ll help a lot thanks.
This video should make it fairly easy to replace the whole spindle assembly and I would recommend replacing both the spindle assembly and the blade, with new hardware too.
Good video, however the blade stop is designed to place the blade inside the U of the bracket. Easier to take blade on or off.
I'm changing mine at 49.4 hour
thanks for the video. I'm in the middle of doing this myself, and it really helped. quick question: why didn't you just re-use the original self-tap bolts?
The original bolts just didn’t seem to be in the best condition but you definitely could always reuse them. I just tend to replace them if they’re cheap so I know everything is new and isn’t going to be rusty and hard to get off in the future.
Anyone got a part number for a 6 point star spindle that's a replacement for this S Blade with the sorry blade options?
There might be more recommended items on that Spindle Assembly Amazon link, look on that page to see what others may have also purchased. And I always like to put the make and model of the mower in to make sure the parts fit, and double checking reviews/Q&A as well.
@@VinnieT Contacted 8Ten and after install I can confirm their PN: c-spn-0053 is a direct fit for changing the S-Blade to 6 point star on a 2022 XT1 LT46. Their LawnRazor mulching blades did an awesome job today too. So glad to be able to get $30 blades that work much better.