Internet clickbait. What the Icon vehicle dynamics video and all your questions about tire size for the Tacoma will be answered. In short only 33’s fit properly 🤡🤡🤡🤡🤡
I mean you have those squared wheel wells now. Same as chevy did with their 4th gen Silverado back in 2019, based of their OG square body in the 70s.. So more clearance. Theres also theres a safety bracket mounted along the sidewall, you pop off the panel (has clips) and remove 3-17mm bolts so it'll clear up quite a bit as well
Love the look of this truck with 37s. Had to pause the video during takeoffs take get a better idea of how it would look leveled. Can't wait to see it with your WD lift. Great video...been waiting to see these new Tacomas lifted.
Haha dude this is crazy 😂 but man that looks good! With a level and 35s I feel like it will look identical to a tundra on 37s just a mini version haha. Lowkey I like the taco a lot more after seeing this lol
That looks sick! Wonder if you can do some trimming and light massaging of the front liner to give it more space. I love the tucked look and hopefully you don’t need much of a lift to get it all to work. Good luck.
Looks good, but realistically how well is that Taco going to turn those or even 35’s? Even with a gear swap. I’ve always wondered because I have thought about a new Tacoma. I have 35’s on my 2015 Ram 3500 with a Cummins (2” level) and won’t run 37’s
3rd gen couldn't even fit non pizza cutter 33s without trimming and cab mount chop. Looks like they may have made that easier with the removable cap/mud flap piece. 35s would looks pretty damn good.
Not true… it’s all about lift and wheel offset and backspacing. I have 2.5 fox front and method wheels 0 offset and 4.75 backspacing and 33’s no rub at all. Zero trimming or cab mount done
@metalftw75 That's with a lift. With no lift or small spacer lift or whatever, people generally needed to at least trim/remold the fendewells. A lot of people opt to CMC, depending on wheels and tire widths, etc. 285/75/16 and 285/70/17 were very popular sizes when I was looking into this stuff.
@@Jtwizzlelift doesn’t fit tires. It’s literally irrelevant. If anything makes it worse since some lifts can get a little more travel out of the coil over. Unless you’re doing some lift that is way too high with no uptravel or body lift but that’s non functional for off-road so irrelevant
That area in the back of the front wheel well is fully removable. Won't get you there but it gives more room and will really help with 35s and a moderate lift.
Curious what will fit without a lift. 31.6” on the off road with trail terrain tires. Wonder if a 33 will go with no rub. 35’s probably still need a lift. Those 37’s are massive on that taco
It’s subjective, but I think 35s make for the best proportion on mid-size trucks. I just installed 35” Mickey Thompsons on my 🇺🇸 Chevy Colorado; big improvement over the stock 33s.
Bumpstops will limit uptravel, which already the taco doesn’t have enough travel on the ifs. I feel like gonna have to cut around the whole fender flare like what was done on the 3rd gen for 35s. It looks like the rears might stuff ok so then just start cutting in the front might just work
Nah dude, forget all that 35s noise. That truck looks good on 37s. Throw on a 2.5-3.5” lift and it’s gonna be sitting perfect. I went 35s in my gladiator and I’ve been praying someone drops nails on the highway in front of me for damn near 2 years now. Get the 37s…
subd!! i bought a 4th gen too! i have a favor! can you check the part # of the mud flaps / splash guards on the front and rear? i tried to look for them at the toyota parts list and no luck! hop you can hook me up! thank you!!
![mgk - Sun to Me (Zach Bryan Cover) [Live from Cheshire Cottage]](http://i.ytimg.com/vi/_ZnbTEs4O6U/mqdefault.jpg)
Yeah, I think 35 with lift would be best. So far loving the new look of the 2024 Taco.
Yes 35 would look so perfect.
The yoda looking pretty fire I agree
Do you think my "33.9, technically 34s would be good stock height on my Sr5, or should I do a leveling kit?
Internet clickbait. What the Icon vehicle dynamics video and all your questions about tire size for the Tacoma will be answered. In short only 33’s fit properly
🤡🤡🤡🤡🤡
I like how you knew it wouldn’t fit but went all in anyways lol For the People!!!
Insane how well they fit on the Tacoma compared to the last gen.
What’s the stock tires on this new ones?
@@siclose33s
@@siclose 265's
I mean you have those squared wheel wells now. Same as chevy did with their 4th gen Silverado back in 2019, based of their OG square body in the 70s.. So more clearance. Theres also theres a safety bracket mounted along the sidewall, you pop off the panel (has clips) and remove 3-17mm bolts so it'll clear up quite a bit as well
@@jacksiironen294245/70/17 on this one
35’s in pizza cutter no lift. Amazing good stuffed looked no clearance problems. Just like the gen 3
Looks great! Underground is my new favorite paint color nice choice.
Those rims look great on Underground
Love the look of this truck with 37s. Had to pause the video during takeoffs take get a better idea of how it would look leveled. Can't wait to see it with your WD lift. Great video...been waiting to see these new Tacomas lifted.
Looks even more like a tundra now! Can’t wait for the lift 🔥
Tacoma gonna look nice with the lift.
Cant wait to see a real set of tires. 37s look crazy.
Those 37"s will wreck that truck. 3" lift with 35"s is good.
Lift, positive caster and bumper trim.
Haha dude this is crazy 😂 but man that looks good! With a level and 35s I feel like it will look identical to a tundra on 37s just a mini version haha. Lowkey I like the taco a lot more after seeing this lol
Still can't stand the back door design. Otherwise it would be perfect for a mid-size look. I bought a different truck as a result.
That looks sick! Wonder if you can do some trimming and light massaging of the front liner to give it more space. I love the tucked look and hopefully you don’t need much of a lift to get it all to work. Good luck.
Def 37’s. 37’s are the new 35’s.
Nice ride man, how do you like the seating and the posture in the Tacoma compared to your previous Tundras?
looks promising! It would be cool to see a video if and when you install trd offroad or pro fenderflares on this.
Looks great!!!
Love that you tried this. Looks so tough!
Can’t wait for that lift kit and tires! Beautiful truck. I can’t wait to get one
Looks good, but realistically how well is that Taco going to turn those or even 35’s? Even with a gear swap. I’ve always wondered because I have thought about a new Tacoma. I have 35’s on my 2015 Ram 3500 with a Cummins (2” level) and won’t run 37’s
Haha love this bro! Thinking bout bigger wheels rn
3rd gen couldn't even fit non pizza cutter 33s without trimming and cab mount chop. Looks like they may have made that easier with the removable cap/mud flap piece. 35s would looks pretty damn good.
Not true… it’s all about lift and wheel offset and backspacing. I have 2.5 fox front and method wheels 0 offset and 4.75 backspacing and 33’s no rub at all. Zero trimming or cab mount done
@metalftw75 That's with a lift. With no lift or small spacer lift or whatever, people generally needed to at least trim/remold the fendewells. A lot of people opt to CMC, depending on wheels and tire widths, etc. 285/75/16 and 285/70/17 were very popular sizes when I was looking into this stuff.
@@Jtwizzlelift doesn’t fit tires. It’s literally irrelevant. If anything makes it worse since some lifts can get a little more travel out of the coil over. Unless you’re doing some lift that is way too high with no uptravel or body lift but that’s non functional for off-road so irrelevant
The Tacoma youtube clout race is on lol 😂
sweet video! Why you got the sr5 over the trd off road?
That area in the back of the front wheel well is fully removable. Won't get you there but it gives more room and will really help with 35s and a moderate lift.
I'm surprised they didn't remove it
Agree with Westcott Designs, I have their preload collar on my 23 4R.
“You gotta pump those numbers up, those are rookie numbers!” 🍻
Love the look of your Taco!
Toyota should just deliver the 24 with 37's from factory, this looks so damn good!
37” Ko2s are closer to a 35. Mine measure 34.75 under load and 20 percent tread left
This looks amazing
Loved this haha looks nuts! 🥜 😂🤘🇨🇦
you stuffed it like a Turkey! but looks dope none the less, nothing a lift can't fix!
Curious what will fit without a lift. 31.6” on the off road with trail terrain tires. Wonder if a 33 will go with no rub. 35’s probably still need a lift. Those 37’s are massive on that taco
My stock tacoma has 265/70/r17 and it feels up my wheel wells like this with no rub
Awesome!!!!
Looks great
Would be interesting to see if portals would work with those 37s.
Kind of a 2 bird solution.
Lol damn just lol, 37s on a Taco. Great job. Try the 35s next. Lol 🤣
Trim trim trim make them fit and let’s see it wheel with them. Love it
I would do 285/75/17’s with no lift, stock wheels. 34” diameter.
This looks siccccc
Big congrats bro
Love the rims can you tell me what kind and make and from where if you have time
Man the color on the taco is so nice
what kind of mpg are you getting with 37's?" Do a video on it
How much for the Westcott work?Love the new truck.
Let the trimming and chopping begin!
Wow, I barely got 33's on my 2012 with an OME 2.5 lift. And they only cleared the front because of the TRD rim offset.
Definitely need some Kings or FOX suspension put some Deaver leaf springs on it and you’ll be fire
It’s subjective, but I think 35s make for the best proportion on mid-size trucks. I just installed 35” Mickey Thompsons on my 🇺🇸 Chevy Colorado; big improvement over the stock 33s.
you guys are crazy....lol
The 2024 Tacoma looks so badass 😫
Leveling kit w/35’s definitely…and that exhaust exit just looks odd, I’d have to do something different with that.
Your 2025 RAM 1500 video is doing well. Nice presentation.
When does the TRD PRO come out??? It’s almost April!!!
Looks great a
color looks nice
Yes yes yes the videos are constant!!!
You made it look like a Tundra 😂
Sick turn radius
Just turn at higher speeds it will grind the clearances you need 🤣
Some nice polished wheels would have looked nice
Looking nice azz hell
What wheels are those they look amazing
Should of stuck with the tundra lol
Even if they did clear that 3.5 would need like 11:88 gears just to get through all of the gears. 🤣😂
HELL YES!!!!!!!
Man I think the stuffed look is so good I wish it didn’t rub I would run that
Stick with the BFG 37s since they are tiny 37s and throw a 2"lift in front and trim as needed and put some correct bumpstops and call it 🤌🏼🤌🏼
Lol just finished video, yeah Westcott and bfg 🤌🏼
Bumpstops will limit uptravel, which already the taco doesn’t have enough travel on the ifs. I feel like gonna have to cut around the whole fender flare like what was done on the 3rd gen for 35s. It looks like the rears might stuff ok so then just start cutting in the front might just work
35x10R17's on stock wheels will be perfect.
37's on portals...
Leave it on 37’s. Lift it and then cut/ trim up front . Extend the bump stops! Done
What offset do you have on these wheels?
Dang 😳 37’s on a Tacoma !!!!
What rims are these?
Thia is what I love about you!
I think you’d also have more room if you went with a narrow tire like a 245-255
Im trading in my Bronco Sasquatch for the 24 TRD Offroad and will use the same 35x12.5R17 Nittos. Just waiting for the factory lift to come out
That engine sounds like it’s about to break
Sounds like 24 still has the taco lean if you’re rubbing more on pass
Why wait what happend to the tundra man? He got a Tacoma?
Damn, it looks badass with 37s! 😍
Sr5 with a cool wheels upgrade made it even more of a bad ass.. man I can’t wait to get the trd sport.
sheesh🔥🔥
Do you have a rear locker? If not, I’m not seeing the logic here.
Nah dude, forget all that 35s noise. That truck looks good on 37s. Throw on a 2.5-3.5” lift and it’s gonna be sitting perfect.
I went 35s in my gladiator and I’ve been praying someone drops nails on the highway in front of me for damn near 2 years now. Get the 37s…
subd!! i bought a 4th gen too! i have a favor! can you check the part # of the mud flaps / splash guards on the front and rear? i tried to look for them at the toyota parts list and no luck! hop you can hook me up! thank you!!
Those look bad ass! To bad they don't fit.
The baby tundra :P
The 35 will be much better
Jeeps be fitting 40s stock no problem
No more back window that opens, 4 cylinder, more $ nah no thanks I’ll keep my 2020 forever
Just curious, how do you afford to buy these trucks?
What else do you do on a rainy day.
Will definitely improve gas mileage.
Hafa Adai from Saipan 🇲🇵🤙🏼
Slap some 35s on and call it a day, digging the look
🗣️🔥🔥💯
you still tippin?