Good video! I’ve got the same machine ,on the adjustable lever you set the mortise width on the two bolts on the lever so no need site it ,the yellow mark by the scale is width of chain,the mortise will do 3 cuts at one go ,one straight down and two sideways if you set the adjustments on the main swing control ,try the Makita 4 blade tenoner,happy framing!
Hi. I normally clamp my machine on the opposite side when doing a mortice close to the end. I have a small block of wood that inserts along the clamp rail so that it will clamp on even. I’m not at my shop for a week but I can take a pic if you need one. I’m able to mortice right out to the end.
I'll test to confirm but I'm pretty sure it will do an 8inch beam with the 7104. The older model won't. I take the one side off of the clamp so it will sit on the beam and use my foot to keep it from walking to the side as I plunge for larger beams.
Good video. Thank you for taking the time for putting this together!
Glad it helped!
Why the hammer on the clamp arm? I'm looking at one of these.
Good video! I’ve got the same machine ,on the adjustable lever you set the mortise width on the two bolts on the lever so no need site it ,the yellow mark by the scale is width of chain,the mortise will do 3 cuts at one go ,one straight down and two sideways if you set the adjustments on the main swing control ,try the Makita 4 blade tenoner,happy framing!
Thanks for the heads up. I never received any training on this so I had to learn on my own. I'll update the video in the future and point those out.
@@peanut_knife_works8417 thanks for the reply! The comment was only to help you out,a good honest down to earth video! Good luck in the future
Hi. I normally clamp my machine on the opposite side when doing a mortice close to the end. I have a small block of wood that inserts along the clamp rail so that it will clamp on even. I’m not at my shop for a week but I can take a pic if you need one. I’m able to mortice right out to the end.
@@todddesroches4193 If you could share a pic somehow. I'd love to see that. Thanks.
@@peanut_knife_works8417 I took some pics today but can seem to upload, any ideas?
Good review, big time saver, it is a potentially dangerous tool so as always be careful
Thanks. It can be. The switch on the handle is something to watch out for for sure.
এই মিসিনটা চাই কিন্তু কোথা থেকে পায়
😂
How much
Is the clamping with truly 7.48” / 190mm or will it fit an 8” wide timber? Thank you and great video!
I'll test to confirm but I'm pretty sure it will do an 8inch beam with the 7104. The older model won't. I take the one side off of the clamp so it will sit on the beam and use my foot to keep it from walking to the side as I plunge for larger beams.
Wandarfull
it mite work better with a little oil like your work pattern.