Ryobi's Foam Blaster does not work with the EZClean pressure washer.
HTML-код
- Опубликовано: 13 сен 2024
- Hi! Guys, today I'll be testing if the Ryobi cordless pressure wash would work with Ryobi's foam blaster. So many of you were asking about these two products.
I was skeptical about the components being synergistic. Unfortunately, it doesn't. I hope this answers what so many are asking. Don't forget to share, like, and subscribe. Thanks for visiting my channel. I'm just spraying foam detergent on the vehicle in this video.
amzn.to/43284nv
The appropriate Foam Blaster for Ryobi EZClean is the "Power Clean Foam Blaster", with Model No. RY3112FB. Not sure if you can return you wrong blaster for the correct one
I've gotten everything squared away since this video. Thanks. The EZCLEAN comes in handy when I need it. At the time of the video, I was experimenting with a new product. Unfortunately, I didn't do much research before I went out and used it. Thanks for watching.
Why waste my time? You never even use the tool and didn’t read the box.
Unfortunately it didn't work with the device which was the point of the video, to see if it worked. I didn't want people to make the same mistake of buying this product and thinking that it would. This was a blind purchase. If figured it would work because it was a Ryobi ezclean pressure washer. I'm sorry if the title of the video was misleading. I truly thought it would. Thanks for your reply. Stay safe 🙏 ❤️
No offense but something tells me your time isn’t that valuable! I take that back (yes all offensive)
If you're thinking of watching this... don't... thank me later
I don't miss that apartment life. I do believe they make a foam blaster specifically for the EZ Clean as well.
Yeah tell me about it. I actually have the Ryobi foam sprayer. Should've done a review on it, but i truly think it's over priced. I wouldn't recommend something that like it at that price point.. Thanks bro.
this is the worst review of anything on RUclips lol.
Thats real cute little 4 door car ur girl has there 😂😂
Thanks for watching..👍🏽It is cute, ain't it.
You should be able to change the fitting on the ryobi 600 pressure washer to a 1/4 quick disconnect connect
how?
@@rauljosegarcia here is channel that shows you how to change the fittings….. IMJOSHV-Car Detailing and Reconditioning Tips.
Hi. Thanks. Buddy. I haven't seen the quick connect that you're referring to. I do know that u can swap it on the holes connection. Do you mean that the quick connection can be swapped on the Wand? If so that would be an awesome modification. Thanks Darrell.
@@PrfctPlyr thanks alot bro!🙏
@@DirtyCruze. np
The setup you have in the video is different from the set-up that you have in the thumbnail… which one is correct?
Is the foam Blaster compatible with the EZ Clean power washer?
It's not compatible. The title says it's not.
I have been searching everywhere for a bigger container that would screw into the main unit...I believe its about 60mm, I would love to attach a 32 oz canister to this foam cannon.
Haven't tried it yet. I could imagine 32 oz (2 pounds) would make the pressure washer top heavy. Maybe a couple litter soda bottles would be way to go . I can definitely can relate tho.
I saw a video of someone using a bigger container with the pressure washer on Instagram. He used one of the huge motor oil containers. These containers are used for alot of different liquid products. For example, washer fluid, and car wash soaps. Not sue how much water it holds, but you can check around to see if there's a container that would hold the water you need. Thx Hope this helps.
Wow! Almost 23 minutes to communicate that it's important to spend at least one minute researching to find that the EZClean has its own dedicated blaster (or to realize that "attaches to a 1/4 in. Quick connect spray wand" specifically excludes the EZClaen).
Yeah. The title of the video says. It doesn't work. At the time of purchasing this machine I wasn't aware that I bought the wrong part and had never used Ryobi products. Ryobi products can be quite confusing for new customers. I admit I should've took more time to research. I recorded the without realizing it was incorrect. Since then i had made other videos. I posted anyways because I didn't want to waste my time. Well more familiar with Ryobi's products and learned a lesson. Thank for you comment, and nextime read the title.
@@DirtyCruze. I actually only wasted about a minute fast forwarding through your video, unsuccessfully looking for a solution to the limited connectability of the EZClean. I have the 600PSI 40V EZClean and another Ryobi 2300 PSI washer, and foam blasters for each, but the one for the EZClean is pretty poor in comparison. I did my research in advance (for everything), because I hate surprises (which are rarely of the kind that make you happy). "Forewarned is forearmed" is still true today. A little bit of research goes a long way towards assuring a hoppy and successful life.
@@richardefriend The 600psl 4OV or 1600 psi pressure washer? I get confused when many Ryobi EZcleaners are mentioned in one sentence. Lol. Good stuff. I appreciate your comment. I love my pressure washer. Use it very often.
Just a piece of advice. Land your plane. It took almost 15 minutes to get to the purpose of your video.
Is there ANY foam blaster that fits in the ez clean other than the one they sell for it. I have the one FOR the ez clean and it's really not great. Can really swap out the orifice.... well without sawing it in half and getting in there.
No. Not that I know of. I tried. It has proprietary components. 😁👍🏽
@DK welp... I popped open the blaster and the orifice is impossible to get to. So I'm gonna saw it open tear out the old and fit in the 1.1mm orifice and find a way to put it back together so that it withstands pressure.... fairly confident in the whole operation except for the last part.
I couldn't find anywhere that says you could spray soap directly through the machine.
How is yours holding up after having sprayed soap through it?
I want to put some rinseless wash (McKee's 37, N-914) in my water but I was nervous even though I have the warranty.
It's holding up like new. 👍 no issues thus far. I've only ran the Ryobi soap through it. I feel it should run with no issues.
@@DirtyCruze. you do not connect the soap bottle directly to the machine
id use it more for decks or houses
Yeah. I agree. I've used to clean floor rugs, bathroom walls,and tub. It definitely service a purpose. It might not be a great car detailing product. I find it to be outstanding for balcony cleaning,porches and whatever else you throw it. Although pressure isn't the strongest, but it's portable incomparable. 👍🏾
Brother love wheel. Did buy sticker for wheel or was already stock?
Thanks, I got them @Tirestickers.com. I truly think it's the best Tirestickers on the market.
get the 650 psi one..
the 40 volt. the battery is what kicks it up to 650... same battery, same output. ur limited
Se llama tifón o tubo sifón.
They make the foam gun for the ryobi EZ clean gun now 😊.
I have the soap blaster(sprayer) ,it's nothing compared to other foam canons on the market. I didn't do a video on Ryobi soap sprayer. I probably should because they're aren't many. Maybe I'll do it. Most reviewer hate it,so don't even bother.
yeah fuck that its bulky i want something to attatch without using hoses and water
Instructions are opposite of what you said
also that stuff u put in doesnt foam..................its not snoaw soap.......... u can use a foam canon. buy the right one............
Save yourself time and money, and just go down to the Self Serve Car Wash, you are gonna thank me for this advice 🙏
How bad of a neighborhood you live in you gotta carry a knife to was your car 🚗
I always carry a edc knife and it's not the only thing I carry. You'd be surprised. MURDA GARDENS. Look it up.
This is where i live and this isn't considered worst part of my city. It's Miami Gardens Fl .ruclips.net/video/qx534aBZIsA/видео.html
ruclips.net/video/sLJE1DMjnEQ/видео.html
ruclips.net/video/sLJE1DMjnEQ/видео.html Miami Gardens isn't a place to live making these videos do come at a risk. This is the safest spot for me to record, because you always have to watch your back here. I appreciate your comment.
the foam blaster does not fit. so how do you get the foam blaster to work with the gun?
It does work with it at all. It only works with their other machines.
Yup foam blaster won’t fit the new hp . You need to buy extra special wand that Ryobi makes another extra &40
Which wand?
@@DirtyCruze.
I just got my washer today, got disappointed too seeing the proprietary fittings. I looked online and saw Ryobi site has a pending wand with a quick connect. People on redit are fabricating their own on those cnc plastic printer machine
@@JohnSmith-xu7ev yeah John can relate with Super disappointing .Not being able swap attachments keeps machine in the box quite often. I would love get my hands on a wand that would allow me to use a metal quick connect. I have searched hi and low.lol Send me the info when you get a chance. I appreciate it 🤙🏾
It is an “orifice” rather than “oracle”
Thanks.
Bro it did work why post
I found out it didn't work while filming the video. I wasn't going to delete all that footage and work.
Also I didn't want someone to make the same mistake of buying this thinking it would work with it.I thought this would fit the portable pressure washer. Someone who is new to this stuff might order this attachments. I posted it to inform whoever needed the info.
you also bought the least powerful version. u need to research before u buy stuff bro................
Bro Trust me it's not going to give you the thick foam like other pressure washers, even if you use the 40 volt version. Chill this video is already old.I've since then done more research on this machine that I probably can build my own. Thanks for the comment tho. 👍🏽 It's perfect for quick clean ups ,but most definitely not suitable for big jobs.
Intro is too long..
Yeah i agree. I've rid of the intro since the video. I'm currently working on a new intro. Thanks for the honest feedback.
@@DirtyCruze. love you video, but the video is a bit too long, nobody has 20 minutes for a review.
Make it shorter please. 5 to 10 minutes is good.
These people expect something good from someone who spends money on a Chevy Cruze. 🤡🤭🤣
bruh?😴
Waste of time to watch.
I’m sure the car is not yours it somebody else
Yea, ok.