Neutral indicator switch / gear indication wires
HTML-код
- Опубликовано: 2 май 2022
- Subscriber request. Let’s look at how the neutral indicator pickup works and how to figure out which wires indicate gear selection on a digital speedometer. #Lifan #HondaCT70
Авто/Мото
Just noticed you are back ,,, very happy to see you back,,, I enjoy your videos very much, thanks Mike
Thanks!
Hi. I was just going to mess with this today. I came to this video confused and thanks to Mike it now all makes sense. Thanks
Thanks for watching!
thank you so so much mr mike, it helped me out a lot, my gear sensor has 5 pin( since 4gears and neutral).. now i need to find out a way to make it work, i guess swapin some wires from the 6 pin connector might help? i’ll keep you posted:) thank u again, bless you😍
i am the one who asked you by the way:)
Genius. It all makes sense now. Thanks.
Very useful, thanks Mike 👍
thanks man very helpful
thank you very much for that clean explication. That's mean , I can wire some LED to this cable and have the information on my little project go kart
Thanks for the content
Thanks mike...am new to your channel but thankfull already...😆😆😆
Thanks for watching!
thank you so much
Thanks for watching!
Do you know the specific name of the contact spring that goes under the sensor? Tons of places sell the sensor but might not include the retainer or the contact spring. Might have to order from china since listings show all 3 pieces.
I want to see a video on the mighty green bike restore.
I don't have the light thing that lights up to neutral can I wire it with out and if so plz tell me how
Thx you My chain has cut that wire and I was wondering if it was important because now it’s not starting
Did the chain jump off? If so, it probably bunch up and broke the pickup coil mount. Take your stator cover off and check the coil and it’s mount….in front of the sprocket.
how do I connect a neutral and gear indicator to my Honda CRF230f?
🤷🏻♂️ Beats me, I don’t even know what a CRF230f is.
hi i just got a used 2021 tiking 4 seater go kart with the long shaft gy6. it has a 3 wires coming out of it about a inch from the shifter rod location on the passenger (right) looking from the rear. it is 3 wires yellow, green/red stripe and purple wires going to a 3 way female plug. it wasnt plugged into anything when i got it just wondering where it goes i cant find any place for it? i`m thinking a indicator for where the tranny is? on those models equipped with that..?? anybody know where that goes? thanks
I've got a Lincin 110CC , I'm looking for a gear sencer with a loom.
Amazon
So do you need the indicator the stator I bought came with a looped red and green wire and not the black peice that the wire goes into like the original one you showed at first can you bypass it or how can I just plug the black peice in from the old stator with no wire or what
Are you wanting the neutral indicator light to work? If not, don’t worry about the plug or wire, engine doesn’t need them to run.
If you do want a neutral light, leave a couple inches of wire on the black plug and cut it off. Then splice it to the red/green in the new stator.
Do you have a part number? Or information on how to choose the correct gear sensor? I would love to put a sensor on my 4 speed Skyteam PBR.
amzn.to/3NYtjRM
Hi Mike great video, my son's 110 cc atv has the same wire colors but I notice the 1st gear pink wire does not light up, all the other wires light up. Any suggestion what could be the problem. Many Thanks
Does each gear indicator have it own bulb? If so, I’d start by making sure the bulb is good and is getting power. These lights are powered all the time, they glow when ground connection is made. If bulb and power are good, I’d move to the gear switch that I’ve showed in this video. In first gear, is it making contact with the brass contact in the switch?
Hey, mike. So, I have a chinese go kart with a single speed lifan style 125cc engine. The kart will start if in forward or reverse, but will receive no spark if in neutral and, thus, will not start. Any insight? Does the position indicator switch play into the ignition, or is it simply for indication and there is an issue with maybe the CDI or something? Thanks.
The neutral wire typically does not tie into the ignition, but yours may be different. The neutral wire on a Lifan is green/red. If you have a wire coming out of the engine that color, I’d first try unplugging it from the rest of the harness.
@@MiniBikeMike Ok, I'll take a look at it when I get a chance, trace the (hopefully) green/red wire, and unplug it and see what happens. Thanks for the quick reply.
This kart has been a REAL headache... wouldn't start in neutral (kids figured out that it would start in gear), then the starter locked up (maybe a sticky starter clutch?) THEN it just stopped running altogether and I think the stator is bad so I'm waiting on that to show up.
D:
Hey, so I just recieved one of these.motors and it's needs all new wiring.
Well my gear indicator wire needs replacing aswell, but I'm noticing through your vid now, the Allen key and contacts for indicator in the block aren't there anymore, what would that piece be called for me to purchase
Neutral switch.
I have a 2008 honda trx 250 ex. It starts and runs no problem but the neutral light does not come on. The reverse light still works though. Any ideas what that could be?
Could be a few things….if it functions like a CT70 neutral light. Obviously, first confirm the bulb is good. I’d then check to make sure the light socket is getting voltage with key on. Then I’d move to the ground wire and make sure it has continuity from each end. If all that checks out, something is amiss with the switch.
All of a sudden my taillight and neutral indicator light quit working. Could this be part of my problem or could it be a ground wire not making contact? I looked all over for a bad ground and cannot find. Any suggestions? Thank you Mike!
Those two items don’t share a ground, so I don’t see how they’d both go out unless you blew the bulbs or lost power to both places. Have you verified that the bulbs are good?
@@MiniBikeMike yes, occasionally they will also come back on together? I don’t get it
I have the same 5 pin plug but it gets no power to it we’re would I get power from
It’s not supposed to get power, it’s a grounding switch. Send power to the neutral light. The ground wire from the neutral light connects to the red/green wire in this switch.
Got a link to that engine?
This is a 110cc semi-auto. I purchased it from eBay.
Will my bike work if I don't connect the nuleutral wire
Yep
@@MiniBikeMike cheers
So can I just ground out neutral? So it will start in any gear? My Kp mini stopped starting in gear I can’t even bump start it anymore
This switch has absolutely nothing to do with allowing the engine to run. These engines will start in any gear. This switch has one function, to illuminate a light to let you know it’s in neutral. This isn’t a “neutral safety” switch.
@@MiniBikeMike aww that sucks
So what should I do my Kp mini 150 used to start in any gear with clutch pulled in but something happened and now it only starts in neutral I think it’s not sencing the clutch but I tried connecting the clutch wires and it doesn’t do anything :( I’m not sure what it could be
@timmysv1k94 Sorry, no help. I don’t know what a Kp Mini is and I’ve never had a bike with a clutch safety switch.
@@MiniBikeMike it's a lifan kp mini 150
@timmysv1k94 Ok…I’m not familiar with that model.
Why would the light stay on when its in gear
It’s still being grounded. Can you pull the black plug with the neutral wire and tell if the switch is moving when you shift gears? Also, make sure the bulb isn’t receiving a ground somewhere else along the harness.
@@MiniBikeMike as soon as this rain stops and dries up a little I'll get to it. Don't have the luxury to do just basic maintenance like owners who's got a garbage I don't because of rules here
I need to say thank you though and how grateful I am for your advise.
Useless thing tbh
🤣🤣 great comment!