A good tip I was taught by a senior tech was always put the fill cap on the hood latch, that way there’s no way to forget to fill with oil. Now I’ve never forgotten but if I ever did the add safety caught helps. Great video and very straight forward and easily understood.
Damn it sir!! This was the best oil changing video that ever saw! You sound so damn nice and clear! I will now change the oil on my new outback! Thank you very much!
First off, NICE SHOP! I'm jealous. Excellent video. You are clearly a good mechanic, with experience and attention to detail. You also have great skill in making diy videos. Also great attention to detail on that, as if you're able to anticipate the watchers' questions and doubts. You also do some cool little things like putting your hand behind the dipstick so we could see the level indicator holes (vs having the engine bay in the background). Great job!
After I watch your video I did my oil change with confident. But as you described that the socket was 17m.m oops.. it's too big for my drain plug. The correct size is 14 m.m. Torque for the drain plug is 41.7 N.m or 30.8 Ft-lb. At the end of your video you should show us how to reset the reminder for the next oil change. Thank you.
The original drain plugs are 14mm. If you buy a new replacement from Subaru, they've upgraded the head to 17mm (less chance of rounding off the points and ending up with a nightmare). The threaded shaft is also longer on the new ones, with about a 3mm non-threaded tip.
Great video! As others have noted... you may find the drain plug is a 14mm head and not 17mm (the case with my 2019 Outback Limited), bring both if you're crawling under there. Also, I use two pieces of 2x12x48 inch plank on which I put a bevel, driving up onto these is a piece of cake and puts the car at a convenient height for an oil change.
Great video! Only difference I found for my 2018 Outback 2.5i Limited was the drain plug was changed to 14mm. However, the internal thread size appears the same and the same size crush washer works.
I have a 2017, and it's a 14mm.. glad I seen your comment, I just bought this outback and was very confused as to why I didn't have a 17mm (like my last subaru). The ignorant dealership put any 150 ft LB torque on it, still trying to remove the stain plug 😔
Ok, I had all my supplies. I had done my own oil changes for some 35+ years. Couldn't get any leverage on the oil pan bolt to get loose. I had a lot of tools used previously, plus jack stands, ramps, etc. Apparently the shops put these bolts on too tight with their hydraulic tools. Couldn't get it off.
To minimize engine wear, before starting run the oil pump to fill the empty filter with oil and pressurize the oil system. On newer subarus this can be done by holding the accelerator pedal all the way to the floor. Then turn the ignition switch for 30 second intervals untll the check oil light goes off. Then it is safe to start the engine after the oil pump has done its job.
It's less than a second for the pressure to fill an empty oil filter. Also there's still a film of oil all over the mechanical parts. Pre filling the filter is not needed in any situation except for a brand new engine build
Great Video! Thanks so much. However, you can not verify torque like that. You must use the torque wrench to set the torque. YOU CAN NOT USE A TORQUE WRENCH TO VERIFY THE FINAL TORQUE. What you really did was verify 40 was reached. You may have torqued it to 80, you just don’t know. Only use the torque wrench to set the final torque. Still a great video!!!!
I’ve never had an honest oil change from any shop I’ve ever been to...when my Fiancé goes, it’s always changed correctly and fully. I’m not a feminist, and I respect men and women alike. Although I do believe a lot of shops take advantage of women not knowing much about vehicles to overcharge them and incorrectly do the job.. I’ve been learning how to work on my own car myself, and maintenance it myself. Thank you for this video
Thank you for the outstanding video, doesn’t get any better. Nothing about the underside of the 2018 outback on the manual. Never owned a Subaru before, great ride/ engine; dash panel control controls suck mightily. Not intuitive/user friendly at all. It’s what wife wanted.
Thank you for this video . Well done. I’m planning to change the oil on my Subaru Outback. Can you tell me what size washer you used on the drain plug. I have to buy this before starting the job.
This oil change video is outstanding, very well done. I've done the oil change on my 2016 Outback and now my daughter in law wants me to do her 2018 Outback. Drain plug socket sizes are different, but not a problem. I do have a question about the crush gasket. Is it correct to put the slightly smaller side of the crush gasket towards the oil sump or towards the drain plug?
The consequences of the smaller side on the bolt flange is what ? Nothing . There really is no significant pressure from the oil for the gasket to hold back. I have reused the original gasket for years with no leakage occurring.
The 2015 subaru outback 2.0 diesel dilutes the oil. I believe that there is a reset procedure so that it dilutes the correct ratio. Any idea how this is done?
Excellent video, very clear. Do you think you should have removed the oil filter before draining the crankcase oil to allow the oil trapped in the filter (due to the back flow prevention device) to also drain out?
Really watch out when adding oil. Boxers oil goes back down for really long time! Over filled by myself once and service did it too even when warning them twice before oil change.
Just a quick question.... It calls for 5.1 quarts. You put in the 5 quart jug...but not another 3.2 ounces? (That's how much .1 is). I understand, check the oil level on the dipstick after vehicle runs for a little bit, and then letting it settle for 5-10 minutes. I was going to cut the top 1/2 of a pop bottle off, make a line on it after filling it with 3.2 ounces of water...then use it for puting in the 3.2 ounces of oil. Do you think it's necessary to put in this 3.2 ounces, or is just the 5 quart jug enough? I like to perform my own oil changes, and just want to make sure I do it correctly. (2019 Subaru Outback 2.5i) PS: Great detailed video and explanation of everything.
I use a Fumoto oil Drain on my Honda Civic EXE 2002 don't need to buy a new wash each time have a new Subaru Outback 2020 it use a 14 mm oil screw not a 17 mm screw.
@@Hallowsaw so in the other comments they said they switched the size of it to a smaller drain plug on the newer models! I was also wondering if I was about to take off the transmission drain plug so here I am double checking lol.
@@Hallowsaw I will note that this is my first Subaru! Idk where the transmission is. On my 8th gen civic that plug located on my outback is the same area where my 8th gen trans deal is. I know they are completely different but better to double check
@@DanielField2023 Thats cool, I just got a 2019 Base model outback. My first Subaru ever so im just learning about it! So far im loving it I even ordered a Subaru Badge of Ownership 😅.
This is the best and most clear video tutorial I've ever seen. Subscribed!
Agreed!
A good tip I was taught by a senior tech was always put the fill cap on the hood latch, that way there’s no way to forget to fill with oil. Now I’ve never forgotten but if I ever did the add safety caught helps. Great video and very straight forward and easily understood.
Damn it sir!! This was the best oil changing video that ever saw! You sound so damn nice and clear! I will now change the oil on my new outback! Thank you very much!
This is the best tutorial I’ve ever seen. You are awesome sir!
First off, NICE SHOP! I'm jealous.
Excellent video. You are clearly a good mechanic, with experience and attention to detail. You also have great skill in making diy videos. Also great attention to detail on that, as if you're able to anticipate the watchers' questions and doubts. You also do some cool little things like putting your hand behind the dipstick so we could see the level indicator holes (vs having the engine bay in the background). Great job!
That was genuinely fantastic to watch, should be a tutorial video for all owners/mechanics 👌
So much respect for multi lingual mechanics. Y’all save our lives!
After I watch your video I did my oil change with confident. But as you described that the socket was 17m.m oops.. it's too big for my drain plug. The correct size is 14 m.m. Torque for the drain plug is 41.7 N.m or 30.8 Ft-lb. At the end of your video you should show us how to reset the reminder for the next oil change. Thank you.
Mines 14mm too
Same here, he should have definitely specified that it could be either one
Mine is 17mm on a 2017 Outback Limited
The original drain plugs are 14mm. If you buy a new replacement from Subaru, they've upgraded the head to 17mm (less chance of rounding off the points and ending up with a nightmare). The threaded shaft is also longer on the new ones, with about a 3mm non-threaded tip.
Very well explained. Best I have seen on YT. Thank you! I always have a spill when removing the plug. At first the oil just runs with high pressure.
I like your demonstration of "best practice" to follow this procedure. Thank you.
Great video! As others have noted... you may find the drain plug is a 14mm head and not 17mm (the case with my 2019 Outback Limited), bring both if you're crawling under there. Also, I use two pieces of 2x12x48 inch plank on which I put a bevel, driving up onto these is a piece of cake and puts the car at a convenient height for an oil change.
On my wife’s 2017 Outback Limited I use a 17mm socket to remove oil drain plug.
@@thedetective8150 since this posting I put on a. Fumoto valve.....easy peasy oil changes
2018 limited 14mm
The 3.6 has a 17. 2.5 Is 14
Thank you for being so thorough, really appreciate it
Great video! Only difference I found for my 2018 Outback 2.5i Limited was the drain plug was changed to 14mm. However, the internal thread size appears the same and the same size crush washer works.
I have a 2017, and it's a 14mm.. glad I seen your comment, I just bought this outback and was very confused as to why I didn't have a 17mm (like my last subaru). The ignorant dealership put any 150 ft LB torque on it, still trying to remove the stain plug 😔
its 14 mm
Yes 14mm, I think the 3.6 is 17
Drain plugs on my 2017 Subaru outback is a 14 mm. Very nice video.
Excellent and detailed mechanic job done! Bravo!
After the oil change, he had me at "I have a brand new engine"☺
Nice tutorial, thanks, I'm planning on doing my first Suburu oil change tomorrow.
Ok, I had all my supplies. I had done my own oil changes for some 35+ years. Couldn't get any leverage on the oil pan bolt to get loose. I had a lot of tools used previously, plus jack stands, ramps, etc. Apparently the shops put these bolts on too tight with their hydraulic tools. Couldn't get it off.
Nicely done! I really enjoyed your demonstration as well as your commentary. Thank you!
To minimize engine wear, before starting run the oil pump to fill the empty filter with oil and pressurize the oil system.
On newer subarus this can be done by holding the accelerator pedal all the way to the floor.
Then turn the ignition switch for 30 second intervals untll the check oil light goes off.
Then it is safe to start the engine after the oil pump has done its job.
How would one run the ignition intervals with push button start on the outback
It's less than a second for the pressure to fill an empty oil filter. Also there's still a film of oil all over the mechanical parts. Pre filling the filter is not needed in any situation except for a brand new engine build
Great video! Well done, thank you!! Just got a 2020 so excited!
Great Video! Thanks so much.
However, you can not verify torque like that. You must use the torque wrench to set the torque. YOU CAN NOT USE A TORQUE WRENCH TO VERIFY THE FINAL TORQUE.
What you really did was verify 40 was reached. You may have torqued it to 80, you just don’t know. Only use the torque wrench to set the final torque.
Still a great video!!!!
That's what I thought when I saw him doing that, and yes, good video.
I’ve never had an honest oil change from any shop I’ve ever been to...when my Fiancé goes, it’s always changed correctly and fully. I’m not a feminist, and I respect men and women alike. Although I do believe a lot of shops take advantage of women not knowing much about vehicles to overcharge them and incorrectly do the job.. I’ve been learning how to work on my own car myself, and maintenance it myself. Thank you for this video
It is a well known problem. That's why I change my girlfriends oil.
Very professional! And I love the accent.
Thank you for the outstanding video, doesn’t get any better. Nothing about the underside of the 2018 outback on the manual. Never owned a Subaru before, great ride/ engine; dash panel control controls suck mightily. Not intuitive/user friendly at all. It’s what wife wanted.
The 2016-2017 models definitely had the better dash panel.
Such a helpful video. Thank you so much for posting!
What a nice relaxing video, thank you!
Thank you for this video . Well done. I’m planning to change the oil on my Subaru Outback. Can you tell me what size washer you used on the drain plug. I have to buy this before starting the job.
I was thinking the Same thing 😂 doesn't hurt to have a small different size washer set though
Good attention to detail! Thank you. Can you do a video for changing front differential fluid on Gen 5 Outback?
Great Explanation, Congrats. Where are you from, I'm very good guessing accents but I couldn't identify yours
Nice video👍. But how do you change oil on 2013-14 Outback if I have not possibility to lift it like you did?
This oil change video is outstanding, very well done. I've done the oil change on my 2016 Outback and now my daughter in law wants me to do her 2018 Outback. Drain plug socket sizes are different, but not a problem. I do have a question about the crush gasket. Is it correct to put the slightly smaller side of the crush gasket towards the oil sump or towards the drain plug?
The consequences of the smaller side on the bolt flange is what ? Nothing . There really is no significant pressure from the oil for the gasket to hold back.
I have reused the original gasket for years with no leakage occurring.
Nicely done. You explained everything perfectly.
The 2015 subaru outback 2.0 diesel dilutes the oil. I believe that there is a reset procedure so that it dilutes the correct ratio. Any idea how this is done?
Excellent video, very clear. Do you think you should have removed the oil filter before draining the crankcase oil to allow the oil trapped in the filter (due to the back flow prevention device) to also drain out?
Would be recommended, however a non issue on the Boxer engine as it's already upside down, therefore empty when the oil is getting drained
My wife just got a 2019 subaru outback and looking under the hood I'm like wait what the? Lol so this is very insightful
Thank you so much. That was clear and instructive.
Good job brother and big hug from Idahome!!!
So helpful and easy to follow! Thank you!
nice clean and clear video. good job sir
Great video. A real professional!
Amigo que gran video muy servicial me ayudo mucho
Him: You should be able to unscrew the oil filter without tools.
Brand new Outback: Needs tools to get filter off 😂
Great man nice and usefull tutorial.Thanks so much.
Thank you so much for the clear explanation. Super helpful for car illiterate like me :)
Thank you very much, nice video.
Great video, thank you!
rockin' those costco tires :)
Great job, buddy!
Daddy..............(swoon) great video, clear and concise
The best! Thank you so much!
Thank you for sharing!
Great explaination
Great teacher!
Really watch out when adding oil. Boxers oil goes back down for really long time! Over filled by myself once and service did it too even when warning them twice before oil change.
This guy is great
Where did you purchase the gasket
What displacement requires 5.1QT? Is it the same for both 2.5L and 3.6L? I can't tell by the video.
What is QT?
@@joggelweekend An abbreviation for US Quart (1/4 Gallon US).
Thanks. Very thorough.
Dig your video thank you
Hi!
How many liters of Engine oil do I need to refill ?
Where's the oil filter on the 6-cylinder version of that engine?
Thank you so much!
Where do you get the new crush washer? Does it come with the new oil filter?
Dealer, online, or parts store have them.
Maybe it is different in the U.S. but the drain plug on my 2017 2.5 OB, the drain plug was 14mm, not 17 mm.
14mm in US too
Thank you!!
Nice Work!!
I have a funnel i got on Amazon that threads into the filler neck.
"ARES 56017 - Oil Funnel for Subaru"
Just a quick question.... It calls for 5.1 quarts. You put in the 5 quart jug...but not another 3.2 ounces? (That's how much .1 is).
I understand, check the oil level on the dipstick after vehicle runs for a little bit, and then letting it settle for 5-10 minutes. I was going to cut the top 1/2 of a pop bottle off, make a line on it after filling it with 3.2 ounces of water...then use it for puting in the 3.2 ounces of oil. Do you think it's necessary to put in this 3.2 ounces, or is just the 5 quart jug enough? I like to perform my own oil changes, and just want to make sure I do it correctly.
(2019 Subaru Outback 2.5i)
PS: Great detailed video and explanation of everything.
I don't think the 3.2 oz is important, just means if you burn oil you might hit the "add" point a little sooner.
It's a 14mm sump plug on my 2020 2.5i Outback
good video
Perfect!
Is your accent Swiss?
I use a Fumoto oil Drain on my Honda Civic EXE 2002 don't need to buy a new wash each time have a new Subaru Outback 2020 it use a 14 mm oil screw not a 17 mm screw.
How come mine is 15mm? Its literally in that same hole. Im confused
Mine is a 2019 its a 14mm
@@edwinmedina4338 sorry mine was actually a 14mm. Wtf did they say 19
@@Hallowsaw so in the other comments they said they switched the size of it to a smaller drain plug on the newer models! I was also wondering if I was about to take off the transmission drain plug so here I am double checking lol.
@@edwinmedina4338 the transmission is further back though
@@Hallowsaw I will note that this is my first Subaru! Idk where the transmission is. On my 8th gen civic that plug located on my outback is the same area where my 8th gen trans deal is. I know they are completely different but better to double check
Subaru puts the oil filter right on top, which gives easy access, but you have to take the car apart to change the spark plugs?!?!
You glossed over the crush washer. I just see a bolt that has a black tip
Wow that's a lot of miles for a 2017!? 60678+miles
I have seen a 2015 with 200k on it
People LOVE their Subaru's!
My has only 42 miles 2020 Outback LOL
@@DanielField2023 Thats cool, I just got a 2019 Base model outback. My first Subaru ever so im just learning about it! So far im loving it I even ordered a Subaru Badge of Ownership 😅.
5.1 is so annoying
6:45 with an accent one can never be too careful. Cynical