For those of you who are wondering about color just take a sharpie that's the color you want and that is a very light color,you can color over the light once you remove the film.
Looks awesome! I was a bit confused though because you said the textured side of the led towards your eyes but then you ended up putting the velcro on that same side so the smooth side ended up facing your eyes
Just wondering if it's possible to do this on like a rubber cowl? I wanted to make a custom flash suit and cowl with LED eyes so I need to know if this would work on a cowl or not
I’ve seen people do mesh eyes on a rubber cowl. But leds is usually kind of hard due to the fact that cowls are very form fitting and don’t leave a lot of room for something like this. But i suppose anything is possible .
Since the panels are most likely acrylic, they could be tinted using iDye Poly or abother synthetic fabric dye. I used the same technique on my Killing Joke Red Hood helmet to make it transparent red.
What if you make only the front shape if the helmet out of whatever material blue light glasses have and then slot it in so that the led lights don’t burn your eyes
I don't know if you had found it yet or not, but here's the link. www.ebay.com/itm/LED-LIGHT-EYES-FOR-1-1-IRONMAN-BATMAN-BLACK-PANTHER-HELMET-DIY-EYES-LIGHT-WHITE/322811071788
That one was made of smoothon 65d resin I think. I now use bjb enterprises tc-804 on my helmets. As far as vision is, it’s okay with the leds turned off. But with them on it’s pretty hard to see unless you’re in a brightly lit area
Hello sir, i have a question regarding the led light, is it the kind of material that i can cut to reshape? What i mean is if i were to cut or reshape the eye part will it still light up or not, i have an idea for the led light but i need to change it's shape from a rectangle to an oval, thanks in advance
I appreciate this video. I am interested in those LED light bars and I might have overlooked the link you said you would provide. Could you provide it again for me? Thanks!!
If you want to build it yourself you can purchase the led module from adafruit. But you have to solder and provide your own wires and battery pack. Or you can buy assembled kits off eBay. Just search led eyes for masks or something.
Animesh Guha Of Course! You’re holding two led panels right up to your face, you can try it, hold your phone up to your eyes at full brightness. That’s how it will feel
Hello! :) Very specific question: you talked about heatform this plastic. Do you think it can be bendable like the shape of an eyes? Also, do you think the led is replaceable by a RGB one? Thanks mate, very nice work!
Would it be possible/would it have a negative affect cutting the plexi/acrylic into a shape or shorten it? I have a mask that the lights I bought (same ones) and the glass pieces are a tad too long to have them sit right. Thanks!
Tom Antonello yes. You can cut them. There is a silver sticker that lines the edges though which helps to keep the light in. If you cut it, try to re-apply that to the newly cut edge
Can you see clearly without a white paper when the lights on ? I'm building a Red Hood helmet and make a how to video for my channel and that information will be good for me.
I've subs your youtube channel, How did you make the helmet? I want to know, i want to try make a cosplay helmet like your cosplay helmet.. please make a tutorial videos how to make a cosplay helmet, and what stuff i have to prepare to make a cosplay helmet..
One ebay seller answered: "when the light closed,u can see it through lenses,the light open can not." But you say one can see through these when they're lit as one can see on your video right here?
I love how you can tell this guy is someone’s cool uncle,this tutorial is amazing man!
He's a thief that is on the run and deleted his Instagram and etsy because he got caught
Huh
For those of you who are wondering about color just take a sharpie that's the color you want and that is a very light color,you can color over the light once you remove the film.
This is EXACTLY what I needed! My mecha suit is gonna be balling at the convention next year!
You are awsome, keep doing these amazing tutorials. Beginings are always hard. Good luck!
juan perez glad you enjoyed it. Hopefully the channel picks up some more subscribers
So you can scam them and steal their money????
This is not cosplay, THIS IS MADNESS!!!!!!!!!!!! I LLOOVE IT!!!
the intro gets better every day
MegaMasher5058 I need to link the awesome guy that made it for me.
Maybe on the inside you can put some dark film to reduce the light
LoganHundred it might be possible. I haven’t tried it.
Maybe wear a sunglasss 😂
i think if you were to put something blue on the inside then you gain a better view! all love and one love i hope you are all well happy days!
@@musadiqahmed3441 that's the idea ^^
I always wondered how you could see through light up masks 😂
Same
Can he see through them and if he can can he see well
Same here.
im trying to do a cosplay and wear it at an airsoft field so its in my best interest to be able to shoot and this is the best one I found so far
Same
In the video you mention shaping the plexiglass. Could you do a tutorial on how to do that?
Looks awesome! I was a bit confused though because you said the textured side of the led towards your eyes but then you ended up putting the velcro on that same side so the smooth side ended up facing your eyes
you are one awesome looking red hood. love the cosplay.
Nocturn thank you!
I was thinking about making a moon knight mask and this was so helpful
That's what I came here for too
@@rhodesw.6201 same here too lol
I'm waiting for the third person to come and say "same bro"
@@destiny6080 same bro! it's the last thing i need to finish my cosplay!
Nice video! You’re killing it. A video on heat shaping lenses would be awesome!
Chris Galusha you got it
and Finally a good tutorial on how to do light up eyes although Xieng prod was ok
MegaMasher5058 thanks man! I love Xieng prods foam work though
that's just badass. We're considering to order one for our upcoming Batman fan film. We'd give credit where credit is due.
thebatmanhimself thank you sir! Glad you enjoyed the video and like our products!
thanks for the LED lighting idea i hope it works with my mask , i bought the red LEDs
Niiiice! Didn’t know you had a RUclips channel. Just subbed. Will be catching up tomorrow while I hit the elliptical. Your buckets are unreal.
Uncle Jessy I just barely started it last week. Thanks for your kind words sir
Uncle Jessy Same! I’ve been following him on Instagram for a while now but I didn’t know he had a RUclips channel
Where did you attach the battery pack. My helmets are pretty snug so I don’t see being able to attach it anywhere inside of it.
you can make a screenslaver mask with led lights called diy led light kit and also the welding goggles and some mouth with silver and black paint
Thanks for video!
The only question is: isn't this dangerous for your eyes? Maybe too long wearing is restricted?
The real thing is, you should never have any bright light close to your eyes.
Sergiotanaz he said that one of the side are none damaging to the eye so you’re gonna have to know which side it’s reflecting
you could put a thin pair of sunglasses on if you are a bit un sure
J. Jonah Joestar yes i agree
@@Ka3mani you can feel the sides the roughest one is the non damaging one
Definitely gonna use this for a Sniper Joe helmet.
Just wondering if it's possible to do this on like a rubber cowl? I wanted to make a custom flash suit and cowl with LED eyes so I need to know if this would work on a cowl or not
I’ve seen people do mesh eyes on a rubber cowl. But leds is usually kind of hard due to the fact that cowls are very form fitting and don’t leave a lot of room for something like this. But i suppose anything is possible .
@@DarkKnightFX mesh does make more sense doesn't it? 😅 I was gonna do a reverse flash cowl and wanted the red glowing eyes but red mesh will work too
How do I shape the led eyes to the mask? I’d like them to I guess heat form to the mask for a more flush feel
Great LED eyes tutorial. My kit is arriving this Saturday. For heat shaping., do you use heat gun and mold around a curved object?
Could you make those glow red? I would like to put them in my helmet but the eyes need to be red for it
Yes you can get red leds
Dose it hurt your eyes how do you counter that?
could you please post a link to those led panel lights?
1. Go to eBay
2. Type in “LED Batman eyes”
3. There they are
Yeah but what is that stuff called?
can you put tint behind the lenses?
to help with the light on in dark room>
Just the info I was looking for. THANKS!
Could I paint these an orange tint? I checked on ebay and couid only find red, blue, green and white. Also great video thank you!
Evan Wells it’s possible but I’m not sure where to get the tinted film or transparent tint
Since the panels are most likely acrylic, they could be tinted using iDye Poly or abother synthetic fabric dye. I used the same technique on my Killing Joke Red Hood helmet to make it transparent red.
What if you make only the front shape if the helmet out of whatever material blue light glasses have and then slot it in so that the led lights don’t burn your eyes
you didnt put the link to the led light panels in the description like you said!
I don't know if you had found it yet or not, but here's the link.
www.ebay.com/itm/LED-LIGHT-EYES-FOR-1-1-IRONMAN-BATMAN-BLACK-PANTHER-HELMET-DIY-EYES-LIGHT-WHITE/322811071788
Can I find the same LED light model in yellow or warm white?
This will really help me because im trying to make an Arkham Knight helmet.
Thank you so much all love and one love happy days!
maybe you can wire in a potentiometer to dim the lights as well if you dont want them off
Cool effect and tutorial. May I ask where are the led kits available from?
"AngleKai Flexible Helmet Led Eye Lights" on Amazon
What gauge wire do you recommend to use to make the switch cord longer?
Hey bro what’s the helmet made out of? And how is the vision with the LED lights?
That one was made of smoothon 65d resin I think. I now use bjb enterprises tc-804 on my helmets. As far as vision is, it’s okay with the leds turned off. But with them on it’s pretty hard to see unless you’re in a brightly lit area
Hello sir, i have a question regarding the led light, is it the kind of material that i can cut to reshape? What i mean is if i were to cut or reshape the eye part will it still light up or not, i have an idea for the led light but i need to change it's shape from a rectangle to an oval, thanks in advance
Hello i am in big trouble to fic this led at my latex batman mask have you a solution? Thanks
Just wonderinh if i were to make a mask out of paper mache can i still put led lights in or does it have to be solid?
Can you see through it well? Or just enough that it's not too bad?
Do you know if the lights could be heated up with a heat gun to allow for curve inside a mask??
Is it possible to add curvature to the panels? I am wanting to achieve the rounded look for the sonar helmet in The Dark Knight.
I appreciate this video. I am interested in those LED light bars and I might have overlooked the link you said you would provide. Could you provide it again for me? Thanks!!
If you want to build it yourself you can purchase the led module from adafruit. But you have to solder and provide your own wires and battery pack. Or you can buy assembled kits off eBay. Just search led eyes for masks or something.
Hey do you think I could get the same lights but Yellow? I need it so bad since you clearly can see trough! Thanks the video :)
So if you wanted like a Yellow glowing eye, can you buy and add a yellow tint vinyl on the other side of the glass to create a yellow glow?
Mello Saldivar-Anaya I think it would work but I'm not sure... I need it in yellow too so if you try it tell me if it Works :D!
Will this effect the eyes, I mean the brightness from those LEDs when u have the mask on?? Like blackout or blindness. ??
Animesh Guha Of Course! You’re holding two led panels right up to your face, you can try it, hold your phone up to your eyes at full brightness. That’s how it will feel
You can buy a certain led that only lights up on 1 side
@@babyccinoau1321 Karen
Nice hair cut buddy, loved the intro.
Legion Amott thanks bud!
I didn't see the link to the led set up in the description. 🤔
Such an awesome video!
How does the light not blind you when looking through it?
Hello! :)
Very specific question: you talked about heatform this plastic. Do you think it can be bendable like the shape of an eyes?
Also, do you think the led is replaceable by a RGB one?
Thanks mate, very nice work!
If you heat it up it will conform to a curve. And the led is just glued in. It can be wiggled out and replaced with one of similar size if required.
@@DarkKnightFX thanks for the answer!
You didnt put the link to the ebay page in the description☹
Does looking through the LED’s hurt/strain your eyes at all?
Where do you put the battery pack?
Would it be possible/would it have a negative affect cutting the plexi/acrylic into a shape or shorten it? I have a mask that the lights I bought (same ones) and the glass pieces are a tad too long to have them sit right. Thanks!
Tom Antonello yes. You can cut them. There is a silver sticker that lines the edges though which helps to keep the light in. If you cut it, try to re-apply that to the newly cut edge
what if you dremmel the edge will I still need the strip ? im thinking what about tin foil ? heat glued on ?
@@DarkKnightFX Silver sticker as in silver tape? Could I use that chrome colored metal tape for this purpose?
Is there any other material for eye (non led) throuch which i can see clearly, but also keeps my eye slightly hidden
Dilip Ghodke yes. There are tinted films you can use.
@@DarkKnightFX thanks but can you give a specific name. It would be helpful
What size wiring does the unit use? I've asked all the ebay sellers and none of them know
Wire size as in length of wire or gage thickness?
Do the lights come in other colors? I need some that are a warmer yellow
I speak Spanish and understand is so hard but your video is very good, thanks
Where can u get the LEDs from?
Anyone know how to dim these kind of LEDs? I got a kit but they were really bright
Can you see clearly without a white paper when the lights on ? I'm building a Red Hood helmet and make a how to video for my channel and that information will be good for me.
Are there red variations for these lights? Link?
Does this work with cloth masks? And can i do this on wide eyes like spiderman
When are you having them back on sale /:
Can you see through the mask while using the lights?
Is there a way you can tint or change the color of the lights?
I felt my hair getting ripped out when you pulled the back off.
Will this make it hard to see with a light in my eyes or Is it normal+Could I go blind from this?
Could this work with a Black Manta helmet?
What is the name of the LED that you use for the mask?
Bro please share the link for the glass
I cant find these red hood videos. Where r they?
give me a link to the LED please
just search up “Batman LED eyes" on ebay and youll find it
do you have a link on where to buy on ebay? i thought it was going to be there
Are you sure those are LED? They look quite a bit like EL panels.
Is it possible that i can put 2 Led Lights on It? Can I see through it if i put 2?
awesome stuff! thanks dude!
I've subs your youtube channel, How did you make the helmet? I want to know, i want to try make a cosplay helmet like your cosplay helmet.. please make a tutorial videos how to make a cosplay helmet, and what stuff i have to prepare to make a cosplay helmet..
coloca el link donde se consiguen ese tipo de led. saludos.. y buen trabajo
So that laser engraving makes it possible to see through the lenses?
One ebay seller answered: "when the light closed,u can see it through lenses,the light open can not."
But you say one can see through these when they're lit as one can see on your video right here?
@@WandaII you can still see when the lights are on. However, it's harder to see if you're in a dark room or somewhere where there isn't much light
How I get that led light ?
is there a way to do this with a urethane bat cowl?
I feel like I'm dumb, wouldn't the light hurt being that close to your eyes?
what shade of red is the helmet?
this fucks your eye up real good
Hello, i'm looking for the LED that you used in the eyes parts. Do you have a link please ?
Thank you !
no link, but I went to ebay and typed in 'Batman LED eyes' in the search and the leds he's using came up. They are all decently priced as well.
How can I order one, pls?
#Count -Ozee www.darkknightfx.com
Can you please put the Ebay link
Can you share the ebay link please?
Where did ya buy the transparent led panels
aliexpress brother
and lastly, where can I buy some of the things in the video, you should add a list in the description
MegaMasher5058 do an eBay search for “Batman led eyes” you’ll see several listings for them.
where can i find that leds? i mean i know it's ebay but what is the name of it xD
Is this in Red aviable too?
Be cool to see how you bend them to fit a batman cowl like the New 52 armored style from Tigerstone :)
BTW what color should I buy, blue or white
donde se compran esos led? los busco y nada ni en mercado libre