This saved me! There are hundreds of leaky faucet videos out there, but yours is the only one that brought up that the handle can get stuck from excess build up. I thought mine was broken because the set screw cranked violently and came all the way out. Nope, it was just SUPER stuck. Some light and persistent taps and it finally came undone! I was a hair away from calling a plumber because I thought I had busted the whole thing. Thanks for the video, man! You probably saved me a few hundred bucks!
I may have previously commented on this video; it doesn't matter. Thank you for not only showing how to fix this specific faucet, but more importantly the process of _how_ to go through this type of repair in general. The details you show, keeping track of the parts during disassembly, the caution to not lose parts or damage things help to make it easier to reassemble it and know where the new parts go and fit together. You're not just demonstrating doing it, you're explaining the how and why behind it. Add in the recommendations for tools and using them properly, and the lesson is complete! Well done!
@@SparkyChannel Dripping finally forced me to repair the kitchen faucet. First time I repaired a single handle ball valve kitchen faucet. Your in-depth explanation of how to re-install the ball valve saved my day. Eighteen dollar rebuild kit from Home Depot and I'm done. Thanks.
Thank you so much, Bill, for your instructions on how to fix a leaking delta kitchen faucet. I tried other online instructions but they weren't nearly as good. You are a very good teacher. You don't assume someone must already know some of it. You aren't cocky, but I suspect you are above average intelligence, because you explain everything thoroughly and are used to people not knowing everything you know. Thank you again. Mickey
You rock Sparky! Great diy video. My faucet is 2 yrs old. 021224 I called Delta and they are shipping me my seat spring repair kit, free of charge. They were kind and helpful on the phone. I am stunned to see a Lifetime Guarantee being honored with no muss/fuss/fine print weaseling. Go Delta! (faucets, not plane carrier....that is a diff story) 😜
My kitchen faucet is 22 years old and the chrome still looks like brand new. I called today and they told me what parts they were going to send for FREE. I will receive then in 7 to 8 days she said. What a great company!
You deserve an Academy Award for production and content. All you "want to be DYI people", this is the way a perfect DYI video should look. Lighting perfect, camera work nearly perfect (a few points deducted by the Russian judge for out of focus stuff), narration easy to understand: perfect. Nearly perfect. Thank you for taking the time to do a DYI video to perfection.
This is one of the best how-to-do-it videos I've ever seen. Thanks for making the repair job totally clear. 1.5 K thumbs up vs. 0 thumbs down kinda says it all! Keep up the good work!
They way this man explain the repair HELPS A LOT. Some people make great videos, but not good explanation. Thank you very much for making this wonderful, helpful easy to understand video.
I'm another profusely grateful DIYer who followed your guidance and did this job today. Appreciated the extra info on aerator. One difference from your vid: I didn't have a spout O-ring. No big deal, it seems. I indeed received free parts after calling Delta. Their Lifetime Warranty apparently went into effect in 1996, so normally MY faucet wouldn't be covered since it (and the tenant in rental unit) had been there since 1987. But they sent parts as a one-time courtesy. Yep, faucet was OLD; but I was prepared for a corroded set screw and handle not coming out readily. Another RUclipsr does comparisons testing a host of products, and proved that the MOST effective "rusty bolts remover" was NOT WD-40, NOT Blaster, but a 50/50 solution of Automative Transmission Fluid and Acetone. (Liquid Wrench came in 2nd.) I still had to be patient, also tapping gentle at the gap between screw and handle, but DID prevail. Yay!! Also needed it to "unstick" the cold-water shut-off valve too, also wrapping a hot towel around it. Yep, just getting started can be tricky... So again, Bill, THANK YOU for sharing your expertise and helping so many people. Def saved a bunch of money. Um, I didn't spend ANY; only time, which is fine. What a great feeling of accomplishment after job done. Take care!
What an amazing step by step explination with incredible attention to little details! I don't normally leave comments but I wanted give a big thank you for helping me fix my faucet. It works like new and it saved me from having to replace the entire system.
I am very much a novice at plumbing repair. But your step by step, detailed instructions made it a cinch to fix the faucet that was spraying all over the place around the handle. I do not have time to call a plumber or call Delta and wait for the parts since we have company coming to stay in the guest room for Thanksgiving. I can't believe that I fixed it myself by replacing the parts I bought from the hardware store. Thank you so much.
This was very helpful, thank you! To anyone out there struggling with the one handle pullout type, Sparkys video was still helpful, just know you'll have to disconnect the pullout and take it out to replace the orings on the neck. Otherwise, this video is spot on. Also, the pullout spray hose oring is 7/16"OD, x 5/16"ID.
Just got new parts from Delta and they have eliminated the ADJUSTING RING and replaced the Cam and Packing with a one piece. I’m glad I read the instructions. Your video was a great help.
You are the most precise teacher in fixing this Delta faucet among the many different videos I watched. You have taught me well! I had successfully fixed my faucet now :)
Thank you soooo much! I was able to fix my mom’s old Delta 150 series kitchen faucet. Thanks to your advice, I was able to get all the parts from Delta free (except the steel ball assembly, which they either forgot or it’s not a covered part). Anyway, after I purchased the ball assembly separately, I cleaned the faucet and replaced the parts exactly as in your video. Everything is perfect now. I appreciate your no-nonsense video, with its clear concise instructions. No endless self-aggrandizing intro headers with annoying music….perfect!
Thank you for this video! I had just bought the kit not realizing that Delta would send one for free (good to know!). With your help, I managed to fix my leaky kitchen faucet by myself. Yay!
If you have a Big Box home store near you, it's probably better to buy the repair kit there. It could takes weeks to get the free parts from Delta while you deal with the leaky faucet every day until then. The repair kits are only a few dollars.
Thank you Bill! I'm about to replace a 40 year old Moen kitchen faucet with a brand new Delta Classic. (Or rather, a plumber is about to replace the faucet, since there are no hot/cold water shut off valves, which need to be installed, and that's way beyond my ability to deal with.) But looking ahead I wanted to be able to know how to fix any leaks that will inevitably occur down the road. I saw replacement kits on Amazon but after watching this video I'll just contact Delta since the faucet comes with a lifetime warranty. But people said there are no instructions that come with these kits, so I searched on RUclips (what would we do without RUclips instructional videos?) and found this one. It's perfect. Much appreciated. Be well.
@@SparkyChannel Thanks. 1 quick question: How wide do the jaws of the adjustable wrench need to be able to open to work with the nut on this faucet? (i.e. will 1.5" be wide enough, or does it need to be bigger? I know they should be smooth jaws, just not sure how wide.)
I watched this video today because I had a leaky Delta bathroom faucet with one handle. I say *had* because with this how-to, I was able to change out the seats and springs just like Bill did. THANKS BILL!
YaY-Hey!! You Have Really Helped Me Out!! Had a 'handyman' help with this and he did such a lousy job!! Didn't grease almost anything, left the white plastic ring at the bottom of neck of the faucet!! I did it All over again. Only had trouble with the grey cam, not staying down, it kept wanting to spring on up. I held it down and put the chrome cap on tightened it carefully! But not too tight. Faucet swings back and forth a Lot better than when the guy 'fixed' it! Guess if you want something done, do it yourself or look for Sparky to help me out! Thank You Ever So Much! Take care, and keep up the fantastic work!!😁🤩😁
Thank you SO MUCH! After several fails and a couple of frustrating hours, I figured out to put the small end of the spring in the hole first, then the seal over the large end, just the way the old one was. That was the only way I could get the seals to seat so it didn’t leak.
Thanks, Bill - I was just about to order a replacement cartridge for $50, when I came across your video. I called Delta, and they are sending me one for FREE!
Thank you so much - once I patiently applied WD40 and a compressed air shot to the allen screw( a few applications over over a few days), everything was a cinch thanks to your instructions. One thing, as you and others have noted be sure and use original Delta Parts. A top local store's brand of repair parts just did not fit right and were a waste of time. The Delta Parts were a smooth operation and the faucet is just as new.
Thanks ! i just changed my delta washers on my kitchen faucet using your video which was the best among the ones I've seen on RUclips. The hardest parts was removing the chrome cap after the handle was off because my model did not have slots for a wrench so i had to use a vice grip but it wouldn't budge at first but then someone explained to me i probably overtightened the wise grip and sure enough i just remove the cap with my fingers 🙂The other part more difficult was when everything was in place before putting the chrome cap back on. I had to use a screw driver to push everything in place that also left the part in its groove. It took 2 tries but I got it ! Turn the water back on and all is great and no more dripping !!! It was driving me nuts LOL
Thanks for all the guidance on this. Our delta single handle wall mount faucet (from 1990's?) has been long out of production, but after waiting on hold and sending photos, they sent us all the parts we needed (in 3 shipments from 2 different states). Your video made it as easy as you make it look.
Great video and AWESOME advice regarding the tip about Delta providing replacement parts if you are the original owner when the faucet was installed. Just received confirmation from Delta that the needed part is on the way.
Very helpful easy to understand video. I followed each step to successfully repair my faucet for free. I got the free repair kit from Delta and had the faucet repaired within a week of watching your great video. I had never heard of plumbers grease, now I will never forget! Thanks!
Extremely helpful video! I obtained my repair kit free of charge, as you implied it might be. Delta is great! Your video definitely helped my accomplish this long-needed task. Thank You good sir!
Your video was a lifesaver, Bill. My kitchen sink has no shutoff valves so a mistake would have meant no water to the entire house. I wondered about all the plumber's grease, and after I finished the handle would not stay up. But once I wiped the grease off the ball, the thing worked prefectly.
Thank you for a wonderfully detailed yet not too wordy explanation how to replace this single type of faucet. I rent but the current repair person is sadly inept and makes a huge mess for simple repairs. I was shocked at the results of the 6 inches caulking job under the tub faucet he did in my shower/bathtub that still had gaps, zero confidence. I fixed my leaky kitchen faucet without any surprises or lengthily clean up after.
It’s 10-27-2024…finally trying to fix my “base” leak in an old Delta single handle. Video is great. Your video shows when removing the two springs that are seated an unobstructed hole that you tell us to clean on the front of cartridge for water. My hole has something over the hole like a diffuser. Wasn’t sure if I should remove???? Many thanks!!!
This was so thorough and clear to follow. Thanks so much! You sound a bit like the infamous Scotty Kilmer (auto guy on RUclips with 5.13 million subscribers). Thought he was branching out. Appreciate that you give as easy to understand instructions as he does. Feel more confident now to attempt this fix.
Hi you are the best! Had a delta faucet leaking around the base when turned on and the spout and base parts were easy to take off, exposing the o rings. Your intro prompted me to call delta who was VERY nice and helpful. They will send me an oring kit for free this time (prob b/c Im not the original owner) and I was able to stop the leak with some teflon tape for now. Liked and subbed!
thank you so much for mentioning the plastic washer which fits it in bottom of the handle part--could not get it working without this important step--now no leaks; your step by step was really good
Thanks so much Bill for this video! I followed it religiously so to speak and it worked perfectly for me. It was hard finding a video for my Delta faucet which is years old. But the faucet in this video looked identical, except for the sprayer. But that didn't matter. Thanks again for recording this HOW TO video.
Thank you for your guidance. I just a couple snafus. One was that the hot water shutoff leaked, so I had to turn off the main water valve and the water heater intake to get the hot water to stop. The tip to get the corroded handle off with wd40 was great.
Bill, love the video. Complete, concise and very easy to follow. Thank you! The only thing I would mention is "if" you still see a slow drip after replacing all faucet parts (Delta of course ;-)) check your aerator. It can hold hard water sediment; the washers may need to be replaced etc. This was my case.
Hell yea sick video, thanks sparky! It’s just about as easy as you made it. Incase anyone is panic scrolling MY everything was way dirtier than the video (steel wool ur bff) my cam assembly didn’t snap in entirely like the video just make sure its in the slot, faucet did leak the whole time until reassembly it’ll be alright just finish putting it all back :D
Thanks alot, man! I accidently have the same faucet in the kitchen and this video really helps me. Greetz from Russia! Btw, my Delta faucet is 25+ y.o. And still works (but drippin). So after this video I'm finally to fix it.
Bill, you're awesome. I can't thank you enough for letting me know about Delta's lifetime replacement and the number to call. They are sending me out the parts I need to fix my 20+ year old kitchen faucet! 🙂 💞
We had a soft ring under the cam assembly. It made it a mother to hold the notch in while screwing the cap back on. Thanks for the easy to follow instructions! Great video! ♥
Thank you for your good instruction! I was able to replace the insides of my Delta faucet. The hot water was leaking and it turned out one of those little thingies with the spring was cracked. Not anymore!
I knew how to do that because I've done it many times in my 60 years of married life, BUT ... I watched your video anyway. I must say you made an excellent video and did a great job of explaining and showing each and every step for those who didn't know, or have never done it before! - Well done Sparky! 😀👍
Worked like a charm. Don't skip the grease. A Big South Florida Thank You, Wild Bill. $12 on Amazon to Fix it. The water valves gave me some trouble. However, after knocking on them with a wrench and a little WD-40 they loosen right up.
What a great and helpful video, Bill! Thank you so much for taking the time to do this. This was a huge help. Question: when I got to the seat and spring step, I could find only one, the left, is it possible that the faucet has worked with only one seat since 2022, the last time I repaired it? I am an auto mechanic, and I know that it’s not good to have parts left over. We never had any difficulty with the faucet until it began leaking intermittently recently. Thank you!
Very good explanation on how to repair a leaky faucet. One thing I would caution viewers on is to be careful not to score the ball seat with the screwdriver. I would use something like my Dremel tool with a brass wire brush attachment for that part of the job. I also thought it might be a good idea to put a little plumbers grease on the outside of the two rubber inserts before reinstalling them in the housing.
Without question, the BEST video re how to fix a Delta single lever faucet! Your step-by-step instructions are not only clear and easy to understand, but you take into account things that an experienced plumber might not think to bring to a novice "plumber's" attention. Your thoughtful attention to detail, together with your confident and encouraging manner enabled me to successfully repair my kitchen tap. I feel such a sense of accomplishment! I could never have done it without your expertise. Many, many thanks!
Just a heads up the newer faucets have a plastic cartridge. There should be a tag on the supply line with a model number and manufacture date. Was able to call and get a free replacement cartridge by calling Delta. Great concise no nonsense tutorial! Thank you!
Good vid Wild Bill and I called Delta a couple years ago after watching your vid and they did exactly what you said they would and got the repair kit from them ...
Great video. So many DIY videos I have watched leave out critical information assuming that everyone already knows about it. Your video went step by step and clearly explained the process taking out any guesswork and making the job simple. Thanks
Great job Bill. No frills, just all that is needed to do it correctly. I winged it last time (only lasted a couple years, no grease was one problem) but I will follow your vid to a T and I'm betting it will work perfectly. Thank you for posting! Subscribed!
@@SparkyChannel Bill, Funny story: The parts in my faucet look IDENTICAL to the one in your video except for a "974-012 DIVERTER DEFLECTOR" that fell out of the spout supply hole when I removed the spout assembly. OK. I already had the Danco parts before I saw your video and heard your recommendation to get only OEM parts free from Delta and I did not get the kit with the new ball as I had looked at it and it seemed and felt fine, no rough spots etc., still mirror bright and I believe I had replaced it a few years ago. Well I otherwise followed your great instruction to a T and after putting it back together (with out a DIVERTER DEFLECTOR, I don't think it makes a difference) it seemed fine except the handle had to be in a pretty specific spot for it not to drip. Well I lived with it for a couple weeks and decided I would follow your advice and call delta and get OEM parts. I called and if 20-25 years old like my faucet with no paperwork, they ask you to take a picture to send. I did and the rep could not ID my faucet and asked me to look at the backside and see if there were any markings. There were markings and they clearly said Price Pfister Classic! Dang! OK. Called Price Pfister (800-732-8238) and they do exactly the same as Delta and will send you the parts. Parts are on the way and I will still use your fine video to remind me exactly how to install. Thanks again, my boo boo had nothing to do with you! Reminder to all out there to not ASSUME just because the parts look identical, that they are. I used a mirror to see the back and get the actual OEM name. 👍👍
Hey Bill, Well I got the OEM parts from Price Pfister, but had other projects going so I put the install off. 9 months later it is still put off🤣 Seems that "the handle had to be in a pretty specific spot for it not to drip" was not as big a deal, as that spot became easy to find over time. Hope I can still find the parts from PP! When I do, I will still come back to your great video for another refresher, and I'm sure it will work perfectly. Thanks again! 👍👍@@SparkyChannel
Called Delta. They sent me the wrong part. I wanted the rubber seals/springs and they sent me the cam assbly. The "customer service" rep had no idea what I was talking about. I bought the correct part on Amazon. Good job Delta! Previously they sent me a replacement handle that was so poorly machined that it didn't secure to the ball. I bought a Home Depot handle that doesn't match cosmetically but it works! Delta needs to get it together and have people that understand their products and not just answer the phone!
@@SparkyChannel Thanks for your excellent instructional video, it was very thorough and left nothing unanswered. I didn't replace the spout O rings since I have a pull out faucet sprayer and It wasn't yet needed and it would have complicated things more than I wanted to deal with. The leak has stopped and the handle is working smoothly. I have no need to replace the faucet so I'll stick with my Delta since I now know how to fix it. Thanks again.
Outstanding video. However, here's a suggestion I learned from doing this fix. When reassembling parts, do NOT use a wrench to tighten the top cap (fancy nut). Just tighten that nut finger tight, and maybe give it another 1/4 twist with a wrench. Wrenching the nut down like a gorilla forces the ball against the (concave) mating surface and it rubs. First time: I firmly wrenched down that nut until it was snug and the faucet developed a slow drip - drip - drip, after final assembly in closed position - moving handle slightly off center seemed to stop drip. Also, I could feel a slight "drag" when moving the lever around, in certain positions, indicating something was rubbing. I disassembled it again and noticed the 2 rubber washers (seats) were flush with the hole, instead of protruding slightly, indicating the ball was pressing against the body. After reassembling I tightened the nut hand tight. There was still a tiny drip drip. I then retightened it by hand with about a 1/5 or 1/4 additional turn with a wrench. There was still approx. 1/8" gap between the (lower) edge of the nut and (upper) edge of spout assembly. If you keep cranking the nut tighter and tighter, that space will disappear until both edges touch. The first time I did this, it seemed normal to crank until the space disappeared and the nut was tight. (Like you would with typical threaded plumbing pressure pipe.) But in this case it seems a little more finesse is needed. Just my 2 cents.
I could not get the ball & cam assemble notch aligned in the cap assembly. I used a 3/4" to 1/2" Sharkbite to push down the ball & cam while I screwed on the cap assembly. Video was very helpful and simple to follow.
Very informative, I appreciated the step by step walk-thru. My repair kit did not come with the white ring that goes on the bottom of the faucet, other than that my experience was spot on.
Thanks for the video, very detailed and well explained. The spout supply hole on my faucet has a filter of sorts in there. Do you happen to have a video or advice on how to remove/clean that? Thanks
Just finished with the repairs, following your video all the way. Working perfectly -- thanks! There were a couple of spots where your video kept me from going down a bad path !
Can you please tell me if the set screw and cap assembly are corroded will they need replacement as well. Also, what if the silicone around the base has worn away and water is leaking under the sink from there? Thanks so much for fantastic tutorial. Great work! 🙏
Great video! If I could've gotten the beauty ring off by myself, I would've succeeded in doing this project without my husband's help. Unfortunately, it was just a little too tight for me to manage. But other than that, I had no problems, thanks to you.
Great little video. Very good instructions. I got a kit at Ace and it was pretty good but cap above the ball was slightly different. It works but I would go with the delta brand as he suggests if I ever have to do it again
Question on the plumbers grease. Since you're putting it inside the faucet, in the valve body where the spring and seat are that bring the hot and cold water in, isn't that water going to be contaminated with grease as it comes out of the faucet into your cup or pot?
Thank you for sharing your knowledge to help people. The repair worked perfectly, and thank god I followed your tip to block the drains or else I would have lost the little hex screw used to secure the handle.
Rectorseal 50811 2-Ounce Plumbers Grease: Amazon: amzn.to/36IPbL3
Playlist: Faucet videos by Sparky Channel: ruclips.net/p/PLSD43kAzjUIQgOERh2EGGkYjPldGdjGOg
Playlist: Bath Fan Videos by Sparky Channel: ruclips.net/p/PLSD43kAzjUITkkk-QVexMdSSczisP-a1s
Playlist: Electrical Wiring by Sparky Channel: ruclips.net/p/PLSD43kAzjUITARtRyFqvVhmqwNm34Ck5k
This saved me! There are hundreds of leaky faucet videos out there, but yours is the only one that brought up that the handle can get stuck from excess build up. I thought mine was broken because the set screw cranked violently and came all the way out. Nope, it was just SUPER stuck. Some light and persistent taps and it finally came undone! I was a hair away from calling a plumber because I thought I had busted the whole thing. Thanks for the video, man! You probably saved me a few hundred bucks!
You're very welcome! Sometimes, it's a detail that makes an explanation work.
I may have previously commented on this video; it doesn't matter.
Thank you for not only showing how to fix this specific faucet, but more importantly the process of _how_ to go through this type of repair in general. The details you show, keeping track of the parts during disassembly, the caution to not lose parts or damage things help to make it easier to reassemble it and know where the new parts go and fit together. You're not just demonstrating doing it, you're explaining the how and why behind it. Add in the recommendations for tools and using them properly, and the lesson is complete!
Well done!
Thanks so much! You're correct, it is really important to keep organized and not lose any parts. Have a great day!
@@SparkyChannel Dripping finally forced me to repair the kitchen faucet. First time I repaired a single handle ball valve kitchen faucet. Your in-depth explanation of how to re-install the ball valve saved my day. Eighteen dollar rebuild kit from Home Depot and I'm done. Thanks.
This is the one to watch. Demonstrated and explained in 8 minutes. Didn’t waste about 25 minutes. Got right to the point. This worked. Thanks!
Thanks Scott!
Thank you so much, Bill, for your instructions on how to fix a leaking delta kitchen faucet. I tried other online instructions but they weren't nearly as good. You are a very good teacher. You don't assume someone must already know some of it. You aren't cocky, but I suspect you are above average intelligence, because you explain everything thoroughly and are used to people not knowing everything you know. Thank you again. Mickey
Thanks so much Mickey!
@@SparkyChannel Thank you for the instruction. Hmm, who is the smooth jazz artist at the end? I might know the artist, but not that particular song.
"Three Wise People" by E's Jammy Jams ... I love the tune! @@musikpal
Dropping a comment so you know that even 2 years on this video is helping folks make sure they don't miss a step in a basic repair ;)
Thanks so much Chris!
You rock Sparky! Great diy video. My faucet is 2 yrs old. 021224 I called Delta and they are shipping me my seat spring repair kit, free of charge. They were kind and helpful on the phone. I am stunned to see a Lifetime Guarantee being honored with no muss/fuss/fine print weaseling. Go Delta! (faucets, not plane carrier....that is a diff story) 😜
LOL! Great to hear.
My kitchen faucet is 22 years old and the chrome still looks like brand new.
I called today and they told me what parts they were going to send for FREE.
I will receive then in 7 to 8 days she said.
What a great company!
Excellent!@@davidh.8513
You deserve an Academy Award for production and content. All you "want to be DYI people", this is the way a perfect DYI video should look. Lighting perfect, camera work nearly perfect (a few points deducted by the Russian judge for out of focus stuff), narration easy to understand: perfect. Nearly perfect. Thank you for taking the time to do a DYI video to perfection.
The little details - “the big end of the valve spring goes into the body” is exactly what I needed!
My pleasure, thanks!
This is one of the best how-to-do-it videos I've ever seen. Thanks for making the repair job totally clear. 1.5 K thumbs up vs. 0 thumbs down kinda says it all! Keep up the good work!
Thanks so much Larry!
RUclips doesn't want anybody to feel bad, so they don't show how many thumbs down.
They way this man explain the repair HELPS A LOT. Some people make great videos, but not good explanation. Thank you very much for making this wonderful, helpful easy to understand video.
I'm another profusely grateful DIYer who followed your guidance and did this job today. Appreciated the extra info on aerator. One difference from your vid: I didn't have a spout O-ring. No big deal, it seems. I indeed received free parts after calling Delta. Their Lifetime Warranty apparently went into effect in 1996, so normally MY faucet wouldn't be covered since it (and the tenant in rental unit) had been there since 1987. But they sent parts as a one-time courtesy. Yep, faucet was OLD; but I was prepared for a corroded set screw and handle not coming out readily. Another RUclipsr does comparisons testing a host of products, and proved that the MOST effective "rusty bolts remover" was NOT WD-40, NOT Blaster, but a 50/50 solution of Automative Transmission Fluid and Acetone. (Liquid Wrench came in 2nd.) I still had to be patient, also tapping gentle at the gap between screw and handle, but DID prevail. Yay!! Also needed it to "unstick" the cold-water shut-off valve too, also wrapping a hot towel around it. Yep, just getting started can be tricky... So again, Bill, THANK YOU for sharing your expertise and helping so many people. Def saved a bunch of money. Um, I didn't spend ANY; only time, which is fine. What a great feeling of accomplishment after job done. Take care!
What an amazing step by step explination with incredible attention to little details! I don't normally leave comments but I wanted give a big thank you for helping me fix my faucet. It works like new and it saved me from having to replace the entire system.
Great job!
I am very much a novice at plumbing repair. But your step by step, detailed instructions made it a cinch to fix the faucet that was spraying all over the place around the handle. I do not have time to call a plumber or call Delta and wait for the parts since we have company coming to stay in the guest room for Thanksgiving. I can't believe that I fixed it myself by replacing the parts I bought from the hardware store. Thank you so much.
Great job!
This was very helpful, thank you!
To anyone out there struggling with the one handle pullout type, Sparkys video was still helpful, just know you'll have to disconnect the pullout and take it out to replace the orings on the neck. Otherwise, this video is spot on. Also, the pullout spray hose oring is 7/16"OD, x 5/16"ID.
Just got new parts from Delta and they have eliminated the ADJUSTING RING and replaced the Cam and Packing with a one piece. I’m glad I read the instructions. Your video was a great help.
Thanks John!
I`ll have to see if my new one comes that way without an adjusting ring.
You are the most precise teacher in fixing this Delta faucet among the many different videos I watched. You have taught me well! I had successfully fixed my faucet now :)
Great to hear, thanks!
Thank you so much for this detailed video.
I’m a 72 yr old lady
and love DIY’s. I’m going to give it a try
Best wishes Cindy!
We watched the video -- several times, stopping and starting as necessary -- and we fixed the faucet! Thank You Sir!
Excellent! Way to go!
Thank you soooo much! I was able to fix my mom’s old Delta 150 series kitchen faucet. Thanks to your advice, I was able to get all the parts from Delta free (except the steel ball assembly, which they either forgot or it’s not a covered part). Anyway, after I purchased the ball assembly separately, I cleaned the faucet and replaced the parts exactly as in your video. Everything is perfect now. I appreciate your no-nonsense video, with its clear concise instructions. No endless self-aggrandizing intro headers with annoying music….perfect!
Thanks so much David!
Three years ago you posted this and it is still helping people like me.
Thank you for this video! I had just bought the kit not realizing that Delta would send one for free (good to know!). With your help, I managed to fix my leaky kitchen faucet by myself. Yay!
Way to go Peg! Great job! :)
If you have a Big Box home store near you, it's probably better to buy the repair kit there. It could takes weeks to get the free parts from Delta while you deal with the leaky faucet every day until then. The repair kits are only a few dollars.
Thank you Bill! I'm about to replace a 40 year old Moen kitchen faucet with a brand new Delta Classic. (Or rather, a plumber is about to replace the faucet, since there are no hot/cold water shut off valves, which need to be installed, and that's way beyond my ability to deal with.) But looking ahead I wanted to be able to know how to fix any leaks that will inevitably occur down the road. I saw replacement kits on Amazon but after watching this video I'll just contact Delta since the faucet comes with a lifetime warranty. But people said there are no instructions that come with these kits, so I searched on RUclips (what would we do without RUclips instructional videos?) and found this one. It's perfect. Much appreciated. Be well.
Sounds great! Best wishes!
@@SparkyChannel Thanks. 1 quick question: How wide do the jaws of the adjustable wrench need to be able to open to work with the nut on this faucet? (i.e. will 1.5" be wide enough, or does it need to be bigger? I know they should be smooth jaws, just not sure how wide.)
I watched this video today because I had a leaky Delta bathroom faucet with one handle. I say *had* because with this how-to, I was able to change out the seats and springs just like Bill did. THANKS BILL!
Great job!
YaY-Hey!! You Have Really Helped Me Out!! Had a 'handyman' help with this and he did such a lousy job!! Didn't grease almost anything, left the white plastic ring at the bottom of neck of the faucet!! I did it All over again. Only had trouble with the grey cam, not staying down, it kept wanting to spring on up. I held it down and put the chrome cap on tightened it carefully! But not too tight. Faucet swings back and forth a Lot better than when the guy 'fixed' it! Guess if you want something done, do it yourself or look for Sparky to help me out! Thank You Ever So Much! Take care, and keep up the fantastic work!!😁🤩😁
Great job! Sometimes a little more attention to detail makes a big difference. Thanks!
Thank you SO MUCH! After several fails and a couple of frustrating hours, I figured out to put the small end of the spring in the hole first, then the seal over the large end, just the way the old one was. That was the only way I could get the seals to seat so it didn’t leak.
Thanks, Bill - I was just about to order a replacement cartridge for $50, when I came across your video. I called Delta, and they are sending me one for FREE!
Excellent!
Thank you so much - once I patiently applied WD40 and a compressed air shot to the allen screw( a few applications over over a few days), everything was a cinch thanks to your instructions. One thing, as you and others have noted be sure and use original Delta Parts. A top local store's brand of repair parts just did not fit right and were a waste of time. The Delta Parts were a smooth operation and the faucet is just as new.
Thanks ! i just changed my delta washers on my kitchen faucet using your video which was the best among the ones I've seen on RUclips. The hardest parts was removing the chrome cap after the handle was off because my model did not have slots for a wrench so i had to use a vice grip but it wouldn't budge at first but then someone explained to me i probably overtightened the wise grip and sure enough i just remove the cap with my fingers 🙂The other part more difficult was when everything was in place before putting the chrome cap back on. I had to use a screw driver to push everything in place that also left the part in its groove. It took 2 tries but I got it ! Turn the water back on and all is great and no more dripping !!! It was driving me nuts LOL
Thank you for this RUclips! I called the number for Delta that you showed, and they are sending me a replacement kit free of charge!
Thanks for all the guidance on this. Our delta single handle wall mount faucet (from 1990's?) has been long out of production, but after waiting on hold and sending photos, they sent us all the parts we needed (in 3 shipments from 2 different states). Your video made it as easy as you make it look.
Great job, way to go!
Thank you -- total beginner here -- managed to fix my leak based on the information you provided.
Great job Chris!
Great video and AWESOME advice regarding the tip about Delta providing replacement parts if you are the original owner when the faucet was installed. Just received confirmation from Delta that the needed part is on the way.
Very helpful easy to understand video. I followed each step to successfully repair my faucet for free. I got the free repair kit from Delta and had the faucet repaired within a week of watching your great video. I had never heard of plumbers grease, now I will never forget! Thanks!
Fantastic! Great job!
Extremely helpful video! I obtained my repair kit free of charge, as you implied it might be. Delta is great! Your video definitely helped my accomplish this long-needed task. Thank You good sir!
Thanks so much!
Your video was a lifesaver, Bill. My kitchen sink has no shutoff valves so a mistake would have meant no water to the entire house. I wondered about all the plumber's grease, and after I finished the handle would not stay up. But once I wiped the grease off the ball, the thing worked prefectly.
Excellent!
So helpful! Took 38 years before our delta faucet handle sheared the pin off the ball. Got the repair kit and ready for another 40 years.
Great job JM!
Thank you for a wonderfully detailed yet not too wordy explanation how to replace this single type of faucet. I rent but the current repair person is sadly inept and makes a huge mess for simple repairs. I was shocked at the results of the 6 inches caulking job under the tub faucet he did in my shower/bathtub that still had gaps, zero confidence. I fixed my leaky kitchen faucet without any surprises or lengthily clean up after.
Glad it was helpful!
Thanks for repairing a Delta which is what I have. The best video for the repair and the most concise on what to do to complete the job.
Thanks so much!
It’s 10-27-2024…finally trying to fix my “base” leak in an old Delta single handle. Video is great. Your video shows when removing the two springs that are seated an unobstructed hole that you tell us to clean on the front of cartridge for water. My hole has something over the hole like a diffuser. Wasn’t sure if I should remove???? Many thanks!!!
This was so thorough and clear to follow. Thanks so much! You sound a bit like the infamous Scotty Kilmer (auto guy on RUclips with 5.13 million subscribers). Thought he was branching out. Appreciate that you give as easy to understand instructions as he does. Feel more confident now to attempt this fix.
My pleasure. LOL! Nope, I'm not Scotty.
Hi you are the best! Had a delta faucet leaking around the base when turned on and the spout and base parts were easy to take off, exposing the o rings. Your intro prompted me to call delta who was VERY nice and helpful. They will send me an oring kit for free this time (prob b/c Im not the original owner) and I was able to stop the leak with some teflon tape for now. Liked and subbed!
Thanks Charlie. Welcome to Sparky Channel!
thank you so much for mentioning the plastic washer which fits it in bottom of the handle part--could not get it working without this important step--now no leaks; your step by step was really good
Glad I could help! Yes, it won't work correctly without that washer.
Thanks so much Bill for this video! I followed it religiously so to speak and it worked perfectly for me. It was hard finding a video for my Delta faucet which is years old. But the faucet in this video looked identical, except for the sprayer. But that didn't matter. Thanks again for recording this HOW TO video.
My pleasure. Great job!
Thank you for your guidance. I just a couple snafus. One was that the hot water shutoff leaked, so I had to turn off the main water valve and the water heater intake to get the hot water to stop. The tip to get the corroded handle off with wd40 was great.
Bill, love the video. Complete, concise and very easy to follow. Thank you! The only thing I would mention is "if" you still see a slow drip after replacing all faucet parts (Delta of course ;-)) check your aerator. It can hold hard water sediment; the washers may need to be replaced etc. This was my case.
Good tip, thanks!
This video is perfect which provides not only repair detail but also parts&material source. Thanks.
Glad it helped!
Your video is perfection!! Every detail was perfection and to the point!!! Still valuable even in 2024!
Hell yea sick video, thanks sparky! It’s just about as easy as you made it. Incase anyone is panic scrolling MY everything was way dirtier than the video (steel wool ur bff) my cam assembly didn’t snap in entirely like the video just make sure its in the slot, faucet did leak the whole time until reassembly it’ll be alright just finish putting it all back :D
Great job!
Thanks. This was far superior to anything else I watched. You are a great teacher.
Thanks so much. Best wishes!
@@SparkyChannel All done. It’s working perfectly!!!!
Thank you. Replaced my faucet internals today using your video (incl grease). Went smoothly and works perfectly now.
Great job!
used this video step by step and did the entire repair without a hitch. Thanks.
Thanks alot, man! I accidently have the same faucet in the kitchen and this video really helps me. Greetz from Russia! Btw, my Delta faucet is 25+ y.o. And still works (but drippin). So after this video I'm finally to fix it.
Bill, you're awesome. I can't thank you enough for letting me know about Delta's lifetime replacement and the number to call. They are sending me out the parts I need to fix my 20+ year old kitchen faucet! 🙂 💞
That's great!
Thank you Bill! Great video. Last time I paid Ben Franklin plumbing over two hundred dollars to do this.
No problem, thanks! Wow, $200? You can buy a really nice new faucet for that.
I just ordered the parts for my delta kitchen faucet and yes it's free! THANK YOU SO MUCH SPARKY!!! Subscribing and big thumbs up 👍👌👏
No problem, thanks!
Just watched your video here, helped me get through my kitchen faucet repair, thanks!
We had a soft ring under the cam assembly. It made it a mother to hold the notch in while screwing the cap back on.
Thanks for the easy to follow instructions! Great video! ♥
Thank you Bill. Your instructions are Clear and Concise. We ordered replacements parts and fixed our Delta faucet using your video.
Sounds good, thanks!
Thank you for your good instruction! I was able to replace the insides of my Delta faucet. The hot water was leaking and it turned out one of those little thingies with the spring was cracked. Not anymore!
Glad it helped!
I knew how to do that because I've done it many times in my 60 years of married life, BUT ... I watched your video anyway. I must say you made an excellent video and did a great job of explaining and showing each and every step for those who didn't know, or have never done it before! - Well done Sparky! 😀👍
Thanks so much!
Worked like a charm. Don't skip the grease. A Big South Florida Thank You, Wild Bill. $12 on Amazon to Fix it. The water valves gave me some trouble. However, after knocking on them with a wrench and a little WD-40 they loosen right up.
Great job William! Yes, those valves can get pretty tight.:)
What a great and helpful video, Bill! Thank you so much for taking the time to do this. This was a huge help. Question: when I got to the seat and spring step, I could find only one, the left, is it possible that the faucet has worked with only one seat since 2022, the last time I repaired it? I am an auto mechanic, and I know that it’s not good to have parts left over. We never had any difficulty with the faucet until it began leaking intermittently recently. Thank you!
Very good explanation on how to repair a leaky faucet. One thing I would caution viewers on is to be careful not to score the ball seat with the screwdriver. I would use something like my Dremel tool with a brass wire brush attachment for that part of the job. I also thought it might be a good idea to put a little plumbers grease on the outside of the two rubber inserts before reinstalling them in the housing.
Thanks for sharing!
Without question, the BEST video re how to fix a Delta single lever faucet! Your step-by-step instructions are not only clear and easy to understand, but you take into account things that an experienced plumber might not think to bring to a novice "plumber's" attention. Your thoughtful attention to detail, together with your confident and encouraging manner enabled me to successfully repair my kitchen tap. I feel such a sense of accomplishment! I could never have done it without your expertise. Many, many thanks!
Congratulations, great job! I'm glad my video helped!
Good video, thanks After installing the valve rubbers I still had a leak. I found backing off the cover a bit stopped it.
Thanks!
Got my faucet fixed easily, thanks to you. Awesome detail.
Great to hear!
Just a heads up the newer faucets have a plastic cartridge. There should be a tag on the supply line with a model number and manufacture date. Was able to call and get a free replacement cartridge by calling Delta. Great concise no nonsense tutorial! Thank you!
Thanks Andy!
Thanks for the detailed instructions on how to fix the leak!
Good vid Wild Bill and I called Delta a couple years ago after watching your vid and they did exactly what you said they would and got the repair kit from them ...
Yes, they love to send out repair kits but getting a new faucet to replace an old worn-out faucet is like pulling teeth! LOL!
I did the same after watching the video and Delta sent out the repair kit no questions asked except when bought and where. Thanks!
@@dstewart4458 Excellent, glad to hear it!
Thank you for the info and displaying Delta numbers. They are shipping replacement parts. TY
Great video. So many DIY videos I have watched leave out critical information assuming that everyone already knows about it. Your video went step by step and clearly explained the process taking out any guesswork and making the job simple. Thanks
Glad it was helpful!
Great job Bill. No frills, just all that is needed to do it correctly. I winged it last time (only lasted a couple years, no grease was one problem) but I will follow your vid to a T and I'm betting it will work perfectly. Thank you for posting! Subscribed!
Let me know how it goes. And welcome to Sparky Channel!
@@SparkyChannel Bill, Funny story: The parts in my faucet look IDENTICAL to the one in your video except for a "974-012 DIVERTER DEFLECTOR" that fell out of the spout supply hole when I removed the spout assembly. OK. I already had the Danco parts before I saw your video and heard your recommendation to get only OEM parts free from Delta and I did not get the kit with the new ball as I had looked at it and it seemed and felt fine, no rough spots etc., still mirror bright and I believe I had replaced it a few years ago. Well I otherwise followed your great instruction to a T and after putting it back together (with out a DIVERTER DEFLECTOR, I don't think it makes a difference) it seemed fine except the handle had to be in a pretty specific spot for it not to drip. Well I lived with it for a couple weeks and decided I would follow your advice and call delta and get OEM parts. I called and if 20-25 years old like my faucet with no paperwork, they ask you to take a picture to send. I did and the rep could not ID my faucet and asked me to look at the backside and see if there were any markings. There were markings and they clearly said Price Pfister Classic! Dang! OK. Called Price Pfister (800-732-8238) and they do exactly the same as Delta and will send you the parts. Parts are on the way and I will still use your fine video to remind me exactly how to install. Thanks again, my boo boo had nothing to do with you! Reminder to all out there to not ASSUME just because the parts look identical, that they are. I used a mirror to see the back and get the actual OEM name. 👍👍
Great story. How did it turn out?@@bwvideo0905
Hey Bill, Well I got the OEM parts from Price Pfister, but had other projects going so I put the install off. 9 months later it is still put off🤣 Seems that "the handle had to be in a pretty specific spot for it not to drip" was not as big a deal, as that spot became easy to find over time. Hope I can still find the parts from PP! When I do, I will still come back to your great video for another refresher, and I'm sure it will work perfectly. Thanks again! 👍👍@@SparkyChannel
That's a plan! Best wishes!@@bwvideo0905
this is the best tutorial i've ever seen.
Called Delta. They sent me the wrong part. I wanted the rubber seals/springs and they sent me the cam assbly. The "customer service" rep had no idea what I was talking about. I bought the correct part on Amazon. Good job Delta! Previously they sent me a replacement handle that was so poorly machined that it didn't secure to the ball. I bought a Home Depot handle that doesn't match cosmetically but it works! Delta needs to get it together and have people that understand their products and not just answer the phone!
I used to buy exclusively Delta but I've gone to Kohler and Moen in recent years. Of the two, I prefer Kohler for kitchen faucets.
@@SparkyChannel Thanks for your excellent instructional video, it was very thorough and left nothing unanswered. I didn't replace the spout O rings since I have a pull out faucet sprayer and It wasn't yet needed and it would have complicated things more than I wanted to deal with. The leak has stopped and the handle is working smoothly.
I have no need to replace the faucet so I'll stick with my Delta since I now know how to fix it. Thanks again.
Awesome video. Now I just need to fix my faucet, but this makes me less overwhelmed about the whole thing.
Thanks a thousand times for your instructions. You are the best!
Outstanding. Our younger workers eat Sparky Channel videos up like candy - the explanations are clear and the layout accessible.
Thanks so much!
Excellent video, helped me out. Glad you mentioned the plumbers grease.
If you use plumber's grease, the next guy to work on the faucet will thank you. And that next guy might be you! :)
@@SparkyChannelcan you use vaseline instead of plumber's grease?
Outstanding video. However, here's a suggestion I learned from doing this fix. When reassembling parts, do NOT use a wrench to tighten the top cap (fancy nut). Just tighten that nut finger tight, and maybe give it another 1/4 twist with a wrench. Wrenching the nut down like a gorilla forces the ball against the (concave) mating surface and it rubs.
First time: I firmly wrenched down that nut until it was snug and the faucet developed a slow drip - drip - drip, after final assembly in closed position - moving handle slightly off center seemed to stop drip. Also, I could feel a slight "drag" when moving the lever around, in certain positions, indicating something was rubbing.
I disassembled it again and noticed the 2 rubber washers (seats) were flush with the hole, instead of protruding slightly, indicating the ball was pressing against the body. After reassembling I tightened the nut hand tight. There was still a tiny drip drip. I then retightened it by hand with about a 1/5 or 1/4 additional turn with a wrench. There was still approx. 1/8" gap between the (lower) edge of the nut and (upper) edge of spout assembly. If you keep cranking the nut tighter and tighter, that space will disappear until both edges touch. The first time I did this, it seemed normal to crank until the space disappeared and the nut was tight. (Like you would with typical threaded plumbing pressure pipe.) But in this case it seems a little more finesse is needed. Just my 2 cents.
I could not get the ball & cam assemble notch aligned in the cap assembly. I used a 3/4" to 1/2" Sharkbite to push down the ball & cam while I screwed on the cap assembly. Video was very helpful and simple to follow.
Thanks Bill. Just did it on my faucet works perfect now
Good honest advice. Thanks a million.
BTW, your amazon link for the repair kit leads to a product no-longer sold.
Very informative, I appreciated the step by step walk-thru. My repair kit did not come with the white ring that goes on the bottom of the faucet, other than that my experience was spot on.
Thank you! I just completed this repair with your help!
Glad it helped!
Excellent tutorial on how to fix a leaking delta kitchen faucet!
Thanks!
Great teacher! Thanks a bunch. Please will this work for Delta 400 DST with spray? If yes, please help with the lik for the repair parts. Thank you.
Thanks for the video, very detailed and well explained. The spout supply hole on my faucet has a filter of sorts in there. Do you happen to have a video or advice on how to remove/clean that? Thanks
Just finished with the repairs, following your video all the way. Working perfectly -- thanks! There were a couple of spots where your video kept me from going down a bad path !
Excellent, great job!
Just fixed my leaky kitchen faucet. A big thanks to you! Cheers!
That's great! Great job on your repair!
Can you please tell me if the set screw and cap assembly are corroded will they need replacement as well. Also, what if the silicone around the base has worn away and water is leaking under the sink from there?
Thanks so much for fantastic tutorial. Great work! 🙏
Great video! If I could've gotten the beauty ring off by myself, I would've succeeded in doing this project without my husband's help. Unfortunately, it was just a little too tight for me to manage. But other than that, I had no problems, thanks to you.
Great job!
Nice precise video. I've done this several times, but had missed the o- ring part. Thanks.
Glad it helped! Good job Dave!
Excellent job , both explaining and showing repair.
Super useful guide! I'm not a plumber by any means by my leak is now fixed.
Glad it helped!
Great little video. Very good instructions. I got a kit at Ace and it was pretty good but cap above the ball was slightly different. It works but I would go with the delta brand as he suggests if I ever have to do it again
Thanks for the tips!
Question on the plumbers grease. Since you're putting it inside the faucet, in the valve body where the spring and seat are that bring the hot and cold water in, isn't that water going to be contaminated with grease as it comes out of the faucet into your cup or pot?
It might a little.
Thank you very much for your video! I'm wondering fi I buy a RP50587 part and replace the whole part would work?
Thank you for sharing your knowledge to help people. The repair worked perfectly, and thank god I followed your tip to block the drains or else I would have lost the little hex screw used to secure the handle.
Excellent!
Great video. Wish everyone that does these videos would take the time to explain everything the way you did. Thanks
Glad it was helpful!
Thank you, this was an excellent step by step for me to do this repair.