Method Surprised 50 Years Old Tiler! Remove Tiles Without Breaking
HTML-код
- Опубликовано: 2 апр 2022
- Tiles can break over time, in addition, some tiles may become underside over time and the shape of the tile may change. In this case, the tiles need to be repaired, but removing the tiles is a difficult task. Usually tiles are broken and removed, but this is both difficult and dirty work. That's why in this video we show you the heat removal method that surprises even master tilers. With this interesting method, you can remove your old, broken, cracked tiles without breaking them. If you need to repair your tiles, the method that surprised the 50 year old tiler! Be sure to watch the video "Remove the tiles without breaking them".
Хобби
I burned my house down completely. The tiles are still on the floor.
LMAO 🤣
😀😀😀
Maybe first wetting them then burning
😆🤣🤣🤣
Lol same 😂 I like
The method of heating and tapping with rubber hammer worked. I have a water leak under my slab. Had to remove 5 tiles that have been down for 10+years. Took time and patience but it worked. I used hot hair dryer. Tks
Like a blow dryer for hair? Great Idea. I'll try it.
Or a heat gun.
if the tile is loose already, why even use heat to loosen it up? Works without heat but needs patience and being gentle with the lifting
@@brf351cdid it work ?
Tried this. Landlord wasn't pleased I left with his tiles. Thanks!
I tried this too, the Fire Department weren't pleased.
Vết ố vàng của khí ga rất khó làm sạch.
Mine wasnt either - I found fis wifes body .
Абалдеть!!!! Я показал это видео плиточнику которому уже 965лет. Он был просто обескуражен от удивления. Мы вдвоём сидим и просто находимся в ступоре и шоковом состоянии., от увиденного. Браво!!!
😂 насмејао си ме,брате!
Я тоже с Рамзесом первым- сижу видос смотрю,он просто зацепенел от увиденного
И сказал заказчик : "Не вечно желаньям моим быть пренебрегаемым плиточниками зане суть плоть. Пусть будут дни их 120 лет"
حالا رویش های بهتری کاشی کاری وجود دارد که کاشی فقط یکبار کار میشود و دیگه هر گز قابل برداشتن نیست.
Удали свой комментарии . из за него может повысить пенсионный возраст
Excellent repair Sir. Skillful use of Fire and Force.
Ничего себе! Вау! Брависсимо! Я плиточник и мне 250 лет, я очень удивлен, теперь буду удалять плитки не ломая!
Wow congratulations on 250 years
Впевнений? Я щось не бачу клей після відклейки. Здається його там нема майже ))
@@zheniahunter9293 Так. Цікаво було б поглянути на видалення нормально покладеної плитки, де клей під всією поверхнею. Щось мені видається що так легко не пішло б...
@@zheniahunter9293 цементная вода
Ага особенно когда плитка лежит на песке, закоптить это вообще норм.. Хаха.. Да она и так бы отвалилась и не сломалась.
Didn't think it could be done,,,I'm impressed!!!
Amazing.
I did exactly that many times and it works.
Some, of course, broke but most of them did not.
¡¡Felicidades, muy buen método!! Usted, sí que ama su trabajo, lo hace con mucho cuidado y limpieza.👏👏👏
I will try this, thank you for this video!
I think that was a very genius way you did it and the finish look fantastic good job.
Simply amazing! I don't plan to do this any time soon, however this is an obviously excellent idea worth keeping for one of those "just in case," situations.
Thank you for posting.
Just in case of what?
The guy was on fire.
If you break a tile, you will have to remove it anyway and the tile is already damaged. If there is a air gap under your tile, HOW big a deal is this? Not much if you have good adhesion and the tile is firmly in place.
blant
@@philindeblanc depends on what the definition of is is. ~bill clinton
So great! Thank you
Wow! Nice job thanks!
Unbelievable what a good technique 👍
For the very specific application of removing tile and not destroying the piece, this is actually quite phenomenal.
Si estuviera bien echa la solera y con pegamento eso no lo sacas sana
WHY IN THE HECK REPLACE THE TILE IN THE BEGINNING? IT WASN'T BROKEN, IT WASN'T CHIPPED, OR UNEVEN SO, WHY REPLACE IT UNLESS....SOME IDIOTS DON'T HAVE ANYTHING BETTER TO DO THAN < listen> TO THEIR TILE. WHAT A WASTE OF TIME, ENERGY, AND MONEY FOR THE SETTER.
@@webs2947 lmfao, I don't even know what to say to you.
it fake dude
@@webs2947 maybe it was loose to the step... ever walked on a loose tile?
El problema de esas plaquetas sueltas es porque la base (el mortero) es muy pobre en cemento, por eso la plaqueta ha salido con el cemento cola pegado a ella. Creo el método del calentamiento es mejor cuando hay un problema de adherencia entre la plaqueta y el cemento cola, puede que con solo calentarla salte.
Coisa de Artista!! Parabéns pelo trabalo e, pelo vídeo!!
Brilliant Presentation ❤️🙏
Krásny príklad že technický pokrok nemusí skončiť na atomofkach,ak už nieje dostupná vzorka materiálu na opravu alebo štandardovo výmena celej podlahy,vďaka Majstro :)
I always thought there must be a way, hope it works this easy for me , and thanks for sharing
Saludos desde Quito Ecuador, me gustó el video gracias.
🇧🇷👏👏👏👏👏 muuuuiiiito bom...
Amazing tip. Thank you!
Parabéns pela dica. 👏👏👏👏👏👏
Very impressive! Thank you for sharing.
Merci beaucoup pour cette vidéo.
Ce mec m'a sauvé la vie.
Ça m'a donné l'idée d'utiliser le décapeur thermique.
J'ai chauffé avec un tourne vis en légère pression en dessous du carreau jusqu'à ce que l'on entend parfois un craque et là magie, l'effet thermique décolle le carreau et la colle st plus molle aussi quand on la chauffe.
Et ça m'a fait gagner des heures de boulot et des carreaux s'il avait fallu tout casser!
Un Grand MERCI encore.
PS: Avantage du décapeur thermique, on n'a pas besoin de nettoyer les carreaux après, ils ont pas noircis du au carbone déposé par la combustion de son chalumeau.
Bon bricolage à toutes et à tous.
Vivendo e aprendendo..!!!
По русски бы сказали. Век живи, век учись.
Изначально стяжка голый песок. Без нагрева эту плитку можно оторвать обычной вакумной присоской.
Ну сама то идея рабочая?
Идея рабочая ,но трудозатратная.Газ нужен.Проще либо дождаться пока плитка сама отойдёт,либо аккуратно расшатать самую легко отрываемую плитку и снять,а далее следующие расшатываются легко перфоратором.Тут нужен опыт , можно сломать плитку.
@@Boogerman927 электрофеном !!!
@@user-ru1xd8cv6l Утюгом?
@@Boogerman927 для снятия больших площадей можно и баллон с горелкой арендовать. Если снимать одну две - не практично, но если большую площадь, то можно.
I thought I would try this. After finishing my shower, I was installing the trims and found out the valves were plumbed wrong. Since I couldn't get to the plumbing from the back, I had to remove 5-36 x 24 tiles. I just used a propane plumbing torch after removing the grout. 2 tiles broke in small chunks but by and large all 5 tiles came off the wall with a little prying. I had no intention of saving and reusing the tile so it's a win for me. I didn't have to beat the wall with a hammer.
Super Like do Professor Marinho do canal Ferramentas e Dicas
Great, clear concise video and very useful technique. Also, 01:27 proves that it's even easier if you get Benny Hill to do the work for you 😀
hahaha
not everyone gets it
While playing yakety sax music
It is a joke. They were on sand not ciment. No trace of glue. This is totally fake as 99% are glued.
Whilst slapping a wee old man on the head.
I can’t believe how surprised this 50 year tiler was!
Legends say the 50 years tiler still surprised till now
@@marcopolo9707 good one 😅🤣😂
You should write an article about it.
It was the look on his face that had me
I am surprised at how surprised the surprised 50 year old tiler was!
Thanks for the tip I will remember this one.👍👍
Great video thanks for posting.
Thats a good reason to back butter your tile. It takes a little longer but they wont be hollow underneath.
It kind of looks like they did but what in the world is the subfloor? It looks like dirt. What I like to do is use a notch towel that's a bit oversized, make and even layer with the niche all going the same direction, which is perpendicular to the longest side of the tile, and make sure to press the tile into it and wiggle it perpendicular to the towel marks.
Ah yes, a video about tiling. Exactly what I needed.
Bravo, majsrote svaka ti cast !!
Now that's impressive ! !
Dang, I installed ceramic tile for 43 years and didn’t have a clue about this technique. I am amazed!
Because it only works with newer installs.
43 года класть плитку.Вот это уровень
развития
А то, что ишаков сношают под хвост, ты слышал?!
Muy bien explicado.
Nice work!
Chapeau.
Top big job
This only works in certain condition, tile type, size and the Granite/tile glue itself,
I tried this method and still the break chance is vary according to the previous placed glue and method of removing itself
Excellent method of removing tiles 👍
Szkoda że typ przykleił na koniec nowe płytki tak żeby nie było widać spodu , bo na starych bylo dużo starego kleju co go nie usunął i by mu się nie zmieściło...
@@andrewruiz5113 hy de f fy hu i u 5
You are the TOP!!! awesome!!!
absolutely perfect
Awesome tricks. Simple and no useless words to explain it.
No useless words? My man didn’t even read the title.
@@vakopilotssystems Nice post, thank you for your sharings, sir.
Awesome!
A idéia é otima. Serve para aplicar na parede?
Thank you for this video.
Perfeito, parabéns pelo trabalho...👏👏👏
That’s brilliant 👍
Я хоть и не плиточник, но мне кажется, что такой метод может не сработать со слишком толстой плиткой. Но одно могу сказать точно: достаточно вытащить одну плитку, и все остальные пойдут намного легче!
O segredo aí é paciência, coisa que muitos ñ tem👀
Спасибо огромное , сейчас для меня это актуально. Собрался водопровод менять , не уверен что найду такую же плитку...
Essa técnica aí é muito excelente. Gostei!
it's just great
Very clever, but would the heat application also work if the tiles were set into a cement based adhersive? Or only if it was a base adhersive that normally would soften with the application of heat, unlike cement and fine sand?
İşinin ehli insanlar her daim takdiri hakeder👍👏👏👏
Gracias ya se como hacerlo gracias a usted :)
Magnífico consejo, gracias!!
👍😃👍 GENIAL IDEA GRACIAS 😃👍😃
Cool line filling video
Muito legal, na minha casa tentei tirar uma peça sem esse método e quebrei.
Круто. Спасибо. Обязательно попробуем.
Great job.
Very interesting. Thanks.
Не, ну если плитка была посажена на коровью лепеху, то конечно проканает...
Muito bom!! Parabéns
Me parece un método muy dispendioso,la cantidad de combustible que se debe usar,una baldosa aguanta, pero si son varias
Free 3 de gt
Great video 👍
Вот это супер абалденный способ! Я кладу плитку уже 95 лет и не знал такого до сих пор. Теперь плитку после укладки снимаю не разбивая и второй раз укладываю, 2й раз лучше всегда получается. Спасибо за обучение, сэнсэй!
Trabalho perfeito, cerâmica antiga não tem como reposição
Keren kawan alatnya,pabrik keramik bisa nangis lihat video ini 🇮🇩🙏❤️
Merci pour votre
A better way then burning. Remove the grout as shown. Seal up the room and flood to a depth of 100mm for two weeks. Hey presto the water has softened the adhesive enough to lift all the tiles. You might need to replaster the walls and maybe replace the underfloor oh and maybe the ceiling beneath, small price to pay for unbroken tiles that you can relay in about 6months after it’s dried out. No need to thank me.
Oh my God! My TV is sinking!
@@nagyba that is alot of (Colateral) damage!
I wanna build a house, can you work for me? Be my counsellor. I can smell that we are a good team. I pay you a fortune of course.
Wow!!! I had to do that job in my house but didn't know that I could have used a torch!!! Thank you so much!!!
👉🍮👍
So it did work without torch too?
I also think torching makes no sense.
If you got them up without a torch why would you want to use a torch?
@@eduardstadtler3708 Yeah. This sounds like nonsense. I don't think a torch is going to do ANYTHING to tile laid with thin set on a proper substrate like cement board or just a plain concrete slab..... except maybe crack the tile.
Eline sağlık usta. Çok güzel bir bilgi oldu bu.
Amazing trick. 😃😇😊
No no no , ciekawy i skuteczny sposób. Dzięki za demonstrację.
Spróbuję żelazkiem. Mniejsze koszta.
2 dni bedziesz kafelki z podlogi w pokoju usuwal
Ciekawe co chłop sypie na klej w 1:51 ?
@@radziuszkaa4380 soli dla smaku
Reminds me of breaking the seam on a granite countertop..:Run propane torch up and down seam to soften the glue so you can begin scoring it with a heavy exacto blade and be careful not to overheat the granite as you may pop a chunk out!
Nice work
Fabuloso!!!!
Those tiles sounded so hollow I bet you could've popped them up without heat
Agree, I dont think the heat had anything to do with it.
Only time I use a heat gun is with epoxy grout and it comes out like butter. Unless I'm missing something obvious these would have came out easy. But if heat does do something im missing. Let me know because i will teach everyone in my company
Спасибо 😃 Молодец 👍🏽
Beh che dire.. altro che bravo sarebbe "quadi" un'offesa.. Sei veramente un piastrellista con molta ma molta passione !!❤❤❤
This video is very satisfying
this can only work if the tile has an air pocket underneath. also in my country most masons (all of them amateurs even though they think they're not) use upto 1 foot deep of tile adhesive (between 4 inches to 1 ft) instead of filling the void with regular concrete before using the tile adhesive at 1in to 1/2in thickness. mainly because they could not care less that tile adhesive is worth 10 times more than cement per kilo, and they absolutely dont care if they rip off the client. which is why i tend to do all tiling work myself (with some help from my brother to help things along).
Where are you located? Regardless of location, a lot of people “busy” but very few professionals .
1ft deep? Concrete or mortar? 1inch of tile adhesive? I would thing 1/8th inch or so at most!!
The sound difference is indicative of air pocket or gaps, so it should work if there is the sound diff, in my opinion.
If the tile doesn't have an air pocket underneath, you don't need to remove it.
Atleast you're not full of yourself.
Сотни плиток я поменял в офисах, я не вижу смысла ее выдирать, если она держится, пусть даже с пустотами, если плитка отслоилась, просто намазываю жидкий плиточный клей и ставлю обратно, предварительно грунтанув, если надо снять, то перфоратор в помощь, если нет плитки с таким же рисунком, то клею другую с максимально приближенным рисунком. Ни кто с газовым балоном не будет бегать по офису и греть плитку это вообще пожароопасно
amazing job
nicely done
When I think of removing tiles it is usually a long, noisy, dusty and laborious process. Just grinding away the grout you gotta seal off the room you are doing it in or it gets everywhere.
It appears to work great on for those exceedingly rare tiles that have just a tiny amount of adhesive on the edges.
It looks to me like its the face of the concrete shearing off. The tile was covered with adhesive. Tho he did not put enough adhesive when he layed them, at least from what I can see. Also I'm not sure that tourch was doing anything. Cutting the grout out helped more than anything. Those tiles were already loose.
wow dude i love u, it works!
Sei il numero uno, è una fatica ma al massimo
Yeah, the 50 Years Old Tiler sure was surprised. The video clearly shows that.
Il piastrellista ha 50 anni😆😆
i believe the title was meant to be "50year old tiles were impressed"
😂😂
Lmfao chill man 🤣🤣🤣
Im a 20 yrs tiler. The hollow sounding tile had already broken bond. Nice flame thrower though
Какой смысл греть, если плитка УЖЕ отклеилась от основания?
Она не отклеилась, просто под ней есть пустоты, то есть ложил херовый плиточник
@@user-ps3tc4ik9b я бы даже сказал клал
@@user-uc6ge8to5r, 😀.
я бы даже сказала, он на них поклал )
Он же и клал, лет 30 назад. Вот теперь косяки исправляет.
@@user-ps3tc4ik9b ж..а говорящая...лиж бы на кого то гнать...глаза из трусов вытащи и посмотри какая основа была рыхлая или со временем в труху превратилась,на такой основе кто бы не укладывал плитку она держаться будет плохо..бл..ть кругом специалисты...только сами сделать ни хера не могут...
I am going to try it.
Excelente idea...el calor reseca el cemento
You need to "butter the back" of the tiles when you set them or at least just rub some wet mud on the back of the tile. setting dry tile on mortar is why the tile didn't bond the first time. You can also add a little link (liquid polymer) to your water and moisten the back. Water let's the mortal make contact with the tile air does the opposite. Same with putting stucco on a block wall, you put link on then you mist it with water before you apply the mud otherwise it can just flake off.
ش
ملاحظاتك مهمة و في محلها 👍
Using the torch is a great way to get the tile to pop off the tiny part holding it. Most customers and OSHA get a little upset with the big torch but I still like it. 🙂
The tile didn't bond? Look again.
O