This technique is from my first book, Boho Chic Jewelry: 25 Timess Designs Using Soldering, Beading, Wire Wrapping and More (published in 2013, Penguin Random House)
Hi Laura, for holding the stone when it's hot you can use a simple ring wood clamp. They are pretty cheap and very useful. Thanks for the lesson. Keep up the good work.
I really appreciate your videos. I found a soldering iron in the garage i didnt know i had so now i can move foreward in trying this. I have some crstals, glass cabs, sea shells and old silverware and im hoping to raise some money for a fence for my cats. Your straight foreward instruction is very clear for my dyslexic brain and its super appreciated, so, thank you!!!
Hola! Qué bien explicado, muchas gracias. Yo estoy empezando a soldar bisutería y me gustaría saber si el hilo de soldar ha de ser muy especial. Tengo uno sin plomo pero cuando pasan algunos días pierde el brillo y queda muy feo. ¿Qué estoy haciendo mal? Muchas gracias!
Thank you very much for sharing this video. Its very clear and informative. Can u pls tell what kind of solderiron u use. Is there a temperature controll unit or normal iron???
I am a beginner and this video was perfect for me. ,and could you tell me please about the name of the red one that you used it for shaping the solder ?
This is so cool. Do you know of any brands that do copper coloured solder suitable for an iron (rather than a blow torch)? I like how the copper looks so much. I’ve looked and can’t find the right search terms so any help appreciated
Hey, I have a beautiful very small stone, less than a inch wide, like a cat eye, I would like to make a pendant out of it but I like all the holding mechanism and soldering will be discreet from behind, is it possible? Will it hold? Can it be removed later without ruin the stone? Do silicone works well for that aswell?
hi laura! great video? could you let me know what jump rings you use? i think i have the wrong ones because i can’t get my jump rings so solder to the pendant. i’ve been shaping the solder into a loop for the time being but i’d like to be able to use jump rings
Hi dear as you are the initiator of this beautiful soft soldering technique i learn all from your book and I'm grateful. Wanted to ask how to classify this solder. I know it's tin and silver. But when a customer asked if it's plated silver or 925 silver I don't know how to correctly describe. Is it a metal mix?
You should describe it as it is written on the label on the package of exactly what you are using; not all brands are alike. It's definitley not plated silver or 925 silver!
Hey and thank you so much!! I wonder what kind of silver solder thread you use?! Is it hard, half hard or vekt?! Does it work the same way with gold solder thread? Thank you ❤️
Hi, I'm new to soldering pendants (Crystal&plates) I was wondering if you you could help me with something. I was using this video and I was able to complete 1/2 of my soldering and then my soldering iron wouldn't pick up the solder anymore, it started to create little balls that rolled off then didn't produce anything else. I was soldering at 450 degree Celsius. Any idea why this was happening and how I can fix it? I feel like I may have ruined my irons tip but I don't know. Thanks!
It could be one of a number of reasons, I go into that in detail in my newest book Soldering Iron Jewelry , which you may find very helpful. Good luck! www.amazon.com/shop/laurabethlove/list/31QO19DFHTJZC?tag=onamzdishfund-20&ref_=aip_sf_list_spv_ofs_mixed_d
Great video! I think I can do this~ thank you! Can you please give suggestions of where to find vulcanized rubber stamps? Also does the copper sheet have adhesive backing? What is the best gauge for this kind of work? And where can we find copper sheets? I know, lots of questions, but I'm new to this kind of project and love your work! Thank you fo sharing so much with us!
J’ai regarder, elle ne donne pas les bonnes informations impossible de trouver avec les liens qu’elle propose, beaucoup de personnes lui posent cette question et sa réponse et tes flou où plutôt inutile, moi elle ne m’as jamais répondu 😏
Hi, So I was trying to solder a jumping ring to one Betsey Johnson pendant cause it broke off. The numping ring didn’t stick to it… no matter what I did. Do you might know why? Thank you!!
I just use what comes with my iron. Be careful not to burn them out, don't leave them on the highest setting just sitting if you are not using it, try to work at the lowest setting you can. You can get good irons and tips from a stained glass supplier, those made for stained glass, from amazon, or some from electronics catalogs, but those are usually too small to do the job since they are meant for electronics repair.
Hola seria posibles q estos videos y lo q hablas permitan la opción en español. Yo te entendí un poco pq se de trabajos con falso vitrales q se hacen con esas laminilas de cobre pero mucho no entendí pq no hablo ingles
Laura I’ve followed your RUclips videos and made the leap to soft soldering. I’m still pretty rough at it. Is there a chance I can send you a px of my last piece to get your suggestions and critique? If this is asking too much please just say so. I love your books and videos! Thanks
My newest book, The Broken China Jewelry Book, will be available on Amazon in late July/early August! Be sure to get your copy! tinyurl.com/4ffrm4ys
thank you for showing how to make soft solder pieces like this. It really helps new people out :)
This technique is from my first book, Boho Chic Jewelry: 25 Timess Designs Using Soldering, Beading, Wire Wrapping and More (published in 2013, Penguin Random House)
Hi Laura, for holding the stone when it's hot you can use a simple ring wood clamp. They are pretty cheap and very useful. Thanks for the lesson. Keep up the good work.
Thanks for the tip!
Thank you so much! I'm just starting out in silver jewelry making, so this is GREATLY appreciated! 😊
So pretty, and a great way to turn all of my polished stones into beautiful jewelry!
I really appreciate your videos. I found a soldering iron in the garage i didnt know i had so now i can move foreward in trying this. I have some crstals, glass cabs, sea shells and old silverware and im hoping to raise some money for a fence for my cats. Your straight foreward instruction is very clear for my dyslexic brain and its super appreciated, so, thank you!!!
Thank you so much and good luck in your jewelry making adventures!
Those putty erasers work wonders to hold small stones in place, i used some when polishing a small one to add a sort of peg
Very clever, nice job.
I most def learned something. Love this.
Hola! Qué bien explicado, muchas gracias.
Yo estoy empezando a soldar bisutería y me gustaría saber si el hilo de soldar ha de ser muy especial. Tengo uno sin plomo pero cuando pasan algunos días pierde el brillo y queda muy feo. ¿Qué estoy haciendo mal?
Muchas gracias!
Try this kind: www.amazon.com/shop/laurabethlove/list/13OL01GUXU26L?ref_=aip_sf_list_spv_ofs_mixed_d
I love yr work it opens up so much possibility ❤
Thank you!
Thank you! Great tutorial! It was exactly what I was looking for. Your piece came out beautifully. I'm excited to give it a try :)
I'm intrigued by the idea of low temperature soldering. Thank you for sharing your knowledge. 👐
Thanks for watching! I have a beginner low temp soldering book coming out in the near future so you might want to check that out!
Such clear instruction, thank you!
Amazing!
Love that. Thank you!
Wow. I love this video.
Thank you very much for sharing this video. Its very clear and informative. Can u pls tell what kind of solderiron u use. Is there a temperature controll unit or normal iron???
I have many different irons! My recommendations are here: www.amazon.com/shop/laurabethlove
I'm curious if this works with more irregular and rough surfaces, and what would it take to do a bronze/brass color to mimic gold.
As for the surfaces you would have to try it out. You can add a copper patina or use paints for a finish.
I am a beginner and this video was perfect for me. ,and could you tell me please about the name of the red one that you used it for shaping the solder ?
You must use a vulcanized red rubber stamp so that it does not melt. Find some here: www.amazon.com/shop/laurabethlove
Love it very much! Thank you and be happy!
I just love the stamp technique! This turned out so beautiful! 🥰🥰
Thanks! Glad you enjoyed the video!
This is so cool. Do you know of any brands that do copper coloured solder suitable for an iron (rather than a blow torch)? I like how the copper looks so much. I’ve looked and can’t find the right search terms so any help appreciated
Hi, There is no such thing, but you can use a copper patina to turn silver solder copper colored. Watch my video copper bezel making and I show how.
ruclips.net/video/oqGs1UlhHEA/видео.htmlsi=z-vnxQKlBpI4mJEE
Hey, I have a beautiful very small stone, less than a inch wide, like a cat eye, I would like to make a pendant out of it but I like all the holding mechanism and soldering will be discreet from behind, is it possible? Will it hold? Can it be removed later without ruin the stone? Do silicone works well for that aswell?
Do not use a silicone stamp only vulcanized rubber
Hi,I loved your video! Where can I buy that stamps?
Thanks, check the description below the video or on eBay, they have to be vulcanized rubber stamps.
That looks like a fun project.
It is! You should give it a try!
hi laura! great video? could you let me know what jump rings you use? i think i have the wrong ones because i can’t get my jump rings so solder to the pendant. i’ve been shaping the solder into a loop for the time being but i’d like to be able to use jump rings
Maybe you are using something that is not compatible with solder. Try copper or silver plated
Hi dear as you are the initiator of this beautiful soft soldering technique i learn all from your book and I'm grateful. Wanted to ask how to classify this solder. I know it's tin and silver. But when a customer asked if it's plated silver or 925 silver I don't know how to correctly describe. Is it a metal mix?
You should describe it as it is written on the label on the package of exactly what you are using; not all brands are alike. It's definitley not plated silver or 925 silver!
Is there a need for sealant? Will this tarnish over time?
No, it's fine as is
Hey and thank you so much!! I wonder what kind of silver solder thread you use?! Is it hard, half hard or vekt?! Does it work the same way with gold solder thread? Thank you ❤️
There is a link to everything I use in the description below the video, I use lead-free alloy solder
what is the copper used for?
You cannot solder stone without copper, it is the base for the solder.
Laura, you are always so nice and fun to learn from. Thank you! 💕😃
You are very welcome, thanks for watching!
So, so, AWESOME 😎👍👍
THANK YOU ❣️ I'm a new subscriber and I'm so excited to find your tutorials! thank you again
Will the copper tape make the solder turn green or seep green from underneath
No
Love watching your channel ❤️
Thank you for sharing, I'm so inspired to get my soldering iron out of storage .
You should do that! Thanks for watching!
Link to where you purchas twisted bails.
where do we find the vulcanized rubber stamps?
Check out my latest Q&A video where I go into this extensively! ruclips.net/video/9E1w7WtoPgM/видео.html
Hi, I'm new to soldering pendants (Crystal&plates) I was wondering if you you could help me with something. I was using this video and I was able to complete 1/2 of my soldering and then my soldering iron wouldn't pick up the solder anymore, it started to create little balls that rolled off then didn't produce anything else. I was soldering at 450 degree Celsius. Any idea why this was happening and how I can fix it? I feel like I may have ruined my irons tip but I don't know. Thanks!
It could be one of a number of reasons, I go into that in detail in my newest book Soldering Iron Jewelry , which you may find very helpful. Good luck! www.amazon.com/shop/laurabethlove/list/31QO19DFHTJZC?tag=onamzdishfund-20&ref_=aip_sf_list_spv_ofs_mixed_d
Does the edge of the foil have burs, or a roughness? If so, do you recommend filing or sanding?
If stamped correctly there should not be any burs or roughness - you can file rough edges with an acrylic file if needed.
i love this...thank you
What metal did you use for the bail, the twisted ring towards the end?
You can use silver, sterling, plated, copper...
Love this! Thanks so much for sharing your technique.
hi, Laura! Have you ever had copper tape come off with tin?
Great video! I think I can do this~ thank you! Can you please give suggestions of where to find vulcanized rubber stamps? Also does the copper sheet have adhesive backing? What is the best gauge for this kind of work? And where can we find copper sheets? I know, lots of questions, but I'm new to this kind of project and love your work! Thank you fo sharing so much with us!
Check out my latest Q&A video where I talk about this extensively! ruclips.net/video/9E1w7WtoPgM/видео.html
J’ai regarder, elle ne donne pas les bonnes informations impossible de trouver avec les liens qu’elle propose, beaucoup de personnes lui posent cette question et sa réponse et tes flou où plutôt inutile, moi elle ne m’as jamais répondu 😏
Hi,
So I was trying to solder a jumping ring to one Betsey Johnson pendant cause it broke off. The numping ring didn’t stick to it… no matter what I did. Do you might know why? Thank you!!
Probably the material was not compatible with solder.
laurabethlove.podia.com/
very clever
Thank you, Miss . Do you happen to have TikTok?
Yes I do
What material are the stamps made out of ? I am in the uk so not sure if we can get them over here
There are links to what I use in the description below the video, thanks for watching!
Is it safe to rinse pantina down the sink?
I would wipe it up with a paper towel and throw that away with your regular trash.
Hello! Doesn't the weld risk breaking?
Not if it is soldered correctly, no
Lovely! Is there any chance of stone getting loose in the future?
Not if you do it right! Also don’t make it extremely heavy and you will be fine. Thanks for watching!
Where can I find good high temperature solder tips
I just use what comes with my iron. Be careful not to burn them out, don't leave them on the highest setting just sitting if you are not using it, try to work at the lowest setting you can. You can get good irons and tips from a stained glass supplier, those made for stained glass, from amazon, or some from electronics catalogs, but those are usually too small to do the job since they are meant for electronics repair.
What kind of substance do you apply to make the tin stick? I just don't know English
Its called Flux
There is a link to all of the materials in the description
Love it. Thank you
Was the bail ring sterling or just a base metal?
You can use either
Where do you get your foil from?
Amazon
So where n how much is the solderingbiron an tha flux and the wire I need to get this cuz I’m ready to do this
In the description below the video
Hola seria posibles q estos videos y lo q hablas permitan la opción en español. Yo te entendí un poco pq se de trabajos con falso vitrales q se hacen con esas laminilas de cobre pero mucho no entendí pq no hablo ingles
so awesome
Laura I’ve followed your RUclips videos and made the leap to soft soldering. I’m still pretty rough at it. Is there a chance I can send you a px of my last piece to get your suggestions and critique? If this is asking too much please just say so. I love your books and videos! Thanks
Sure you can tag me on Instagram or Facebook or post a photo on my Facebook Page at facebook.com/DishfunctionalDesigns
Beautiful!
Gorgeous!
So cool! Do earrings. ❤❤❤❤❤❤❤❤❤❤❤❤
Does anyone know where to get gold solder?
Solder only comes in silver but you can add color to it by adding a patina
Здравствуйте не могли бы вы написать все материалы которые использовали.Спасибо.
In the description below the video. www.amazon.com/shop/laurabethlove
Very cool, mahalo!
Onde compro?
www.etsy.com/shop/dishfunctionldesigns
Hi, is there a certain type of solderthat you use for jewellery?
Check out my latest Q&A video where I talk about this extensively! ruclips.net/video/9E1w7WtoPgM/видео.html
Your work is much neater than another RUclipsr who does the same thing. Her work comes out rough and globby sometimes.
I'm a pro :)
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤