The “ Wrong Right Way “ to use PTFE or Teflon tape with your fuel system.
HTML-код
- Опубликовано: 20 фев 2021
- I am most likely going to rub a lot of car guys the wrong way with this video, but I only speak from experience. I have never had a problem with PTFE / Teflon tape clogging anything in my fuel system ever. People always say not to use it, but my logical way of thinking leads me to believe they are just installing it incorrectly. Take this video for what it is worth, just remember all the guys with flooding carburetors or injectors always blame something besides themselves.
#LT1 #Gen2 #V8S10 
Авто/Мото
One of MANY emergency track-side fixes!!! The things we do to keep going rounds..
Well explained!!
Well done!!
Right on brother !! Sometimes we gotta do what we gotta do! Definitely in that boat !
The wrong right way? I believe it’s called the right, wrong way 😂.
Awesome video as always my man
Nobody will get it, but I prefer " Lord of War" 😆. This is Merica we can do what we want.
Great video!
Very good tip, thanks!
Heh, the answer at the beginning got me. I giggled.
I saw it in a meme, had to try and pull it off with a video. If it made one person giggle it was worth it have a great day brother.
Thank you very informative.
You're literally a scientist.
Thanx man really appreciate the video. Great help
Thank You, really help brother 👍🏿
I thought yellow was for gas pipe thread like co2, argon, natural gas. I didn't think it was rated for fuel. I may be wrong about that but I am pretty sure that was the case. Its more of a thread lubricant than a sealer anyways although it does have some minimal sealing properties. According to the website you can use rectorseal #5 with gasoline though.
Good stuff thanks mate
Damn s10 is solid bro. Id to link up with you at colonial beach this summer. I have a s10 406sbc and a mustang bbc 468. You do Any bracket racing ?
i just put a high flow filter on my lexus the guy at part store said not to use any sealant on the 6an fitting so i didnt, put it on the car and the thing starts leaking. go get some of this and seems to be ok so far.. fingers cross it lasts. what are yiu supposed to use if ur not supposed to seal it and it leaks..?
I used some of the yellow fuel resistant PTFE tape recently and the stuff literally turned to goo and ran down the side of the fitting and and the carburetor. Seems that fuel will dissolve this stuff no matter what the manufacturer says.
May I ask you a questions: I ordered some straight AN to NPT Adapter Fittings and I am wondering that some have o-rings and other dont. What is the reason here. Do I have to use it with o-rings or a washer instead? My plan is to install them with loctite 577 only. Cheers
I’m curious if I need the fuel rated Teflon on my sump install on my diesel truck. Not even sure if the yellow Teflon can work for diesel
The moneygon is was pretty funny
Do you tape the AN side too ?
No it doesn't need anything.
Do you tape the AN aside too?
no need, the 37° taper is sealing good and is made to take apart over and over again without sealant and other shit.
This is showing ur experience after using wrong ptfe ,,,ahhhaahhaa
if you will use junk, why use a tread/connection that needs a sealer? Why just not go with an AN connection that is made to take a part a lot without checking an o-ring or use sealer? That what's the AN connection is made fore!