Wow, I just love the simplicity of this vice, lightweight,portable and very pleasing on the eye ...what's not to like; will definitely be following your other videos. Thank you for taking the time to make it.
Daniel Robertson , i saw it too, but i think he taught us about it separately. Or we can understand that with professor : First is perfect material to do any thing. Ha ha
Thank you for watching.This design is mine but it is common, and idea of using clamps is not mine.I referred to the video which I watched in RUclips in the past. I have forgotten that video.Maybe > > > ruclips.net/video/2xa5bZ_Ek5M/видео.html
It's exactly what I need too. I made a very nice looking woodworking bench but it's used for other purposes as well. I don't want to install a large or not so good looking woodworking vise on it. This vise will fit the bill, and it's not a permanent attachment to my bench.
Nice .. but i think the metaliques parts is mor estitiqual and mor nice if it is in the curving of the wood not in out of this ones ...it's just idea ❤
It may have been covered elsewhere in the comments but here goes: I liked what you did - simple, affordable and achievable. I'd have liked a subtitle into at least English of what two of the coatings were - the wood coating was simple but I wasn't quite sure what the metal coating was. BUT! The camera shake was a serious blemish for an otherwise well-produced video. Every time you actually did something, the whole image blurred. A tripod sitting on the floor or a separate table or stool perhaps? Even a piece of timber clamped to something else and overhanging the workbench to mount the camera on. I enjoyed the light background music - what was it?
10 1/4 long X 4 3/4 wide X 1 3/4 thick. I think I have some white oak firewood that is not going to get burned for this project. Love the idea and design!
Japanez carpenters and woodmaster is the best of the bestmaster on the world.Each wood works from Japanes hand is the bigest Artwork.Amasing,im impresed.
Excellent. But may I make a humble suggestion: to place the iron angles FLUSH with the Wood jaws, and to use larger iron angles, so you have a larger surface. I would use flat head crews, coutersunk the holes in the iron angles, so that the screw heads don't protrude...just a suggestion! Best Wishes from Mexico.
I like your idea of using the steel angle pieces to convert a wood vise to a metal vise. I can use that idea to temporarily convert my bench woodworking vise and my portable workbench for light metal work. Arigatou!
折角、埋めた節が結局使われなかった所で、ちょっと笑いました。
あくまでも、ちょっとした工作を行う際に使う簡易なツールとしては、十分な機能ですね。
もう少し幅の狭い小型の物を、僕も作ろうかなと思います。
いつも楽しく拝見しております。
クランプ３つで卓上バイスすごいなぁ~
手軽に持ち出せていいアイデアですね。
既に卓上にド~ンっと固定しているバイスと併用したり、同じ簡易バイスを二つ使えば長尺物の固定も可能になりますね。
L字金属に乳白色？の液体を塗布されていましたがあれは何ですか？
まぁ~結果残念だった節穴埋めも勉強なりました。
治具製作動画ってアイデア豊富で面白いですね毎度驚きの連続です、次回もよろしくお願いします。
コメントありがとうございます。
L字金属に塗っていたのはソフト99の「赤サビを黒い防錆被膜に変える」という商品です。
その名の通りサビ止めです。ペンキよりも付着力が強いので使ってみました。
バイスに合わせてバイスで挟むのはデスク上で使用出来るので良いですね、また金属もは挟めますね欲しいですね・・・
Отличная идея.
Взял еë, может быть пригодится.
Однозначно ➕.плюс.
Interesting. I've often improvised basically the same thing, but making a nice dedicated unit could be useful. Thanks.
Excelente diseño, muy práctico.
excellent idea..you´re a genious!!!..thanks for sharing
Wow, I just love the simplicity of this vice, lightweight,portable and very pleasing on the eye ...what's not to like; will definitely be following your other videos. Thank you for taking the time to make it.
una bravura e una manualità superiore
Think twice than cut once (1:00 -- 5:53) :)
Excellent tortorials keep it up
Very nice!
Dude you make nice things but you have to put some work into your workbench. I notice its not very sturdy.
アイデアすばらしいですね！！でもせっかく埋めた節の所切っちゃったのはうけました(笑）
Nice first minute. :-) cutting that away later will get people thinking at least twice :-D
日本の伝統工具のみ、かんなは素晴らしいです。
Good ones,I'm in
なるほどーーー、金工用と木工用はアングルを外すのかと思いきや、「裏返す」んですね。
これは、素晴らしい。。。。
でも、厚い材か貼り合わせて厚みを出さないとだめですが。。
Such an elegant solution
良いですね、制作販売はしないのですね
Fantastic idea 👍👍👍👍
Респект!
cool yet simple design
Lol did that work to fill that knot hole and you just ended up cutting it out. Haha. You’re awesome man! Love the build! Thanks for sharing.
Daniel Robertson , i saw it too, but i think he taught us about it separately. Or we can understand that with professor : First is perfect material to do any thing. Ha ha
Was wondering why he went to all the trouble of filling the knot-hole,only to cut that section out & throw it away ?!
構造簡単で作り易そうですね。
私のワークテーブルに万力が固定してあるのですが幅が足りない時があるので同じものを作ろうと思います。 ありがとうございました。 (*^^)v
ありがとうございます。
参考にしてもらえると、動画投稿者冥利に尽きます。←「みょうり」ってこんな字だったんだー！発見
とてもセンスが良いです！
This is exactly what I have been looking for!!
Thank you for sharing this!!
Is this your design?
Thank you for watching.This design is mine but it is common, and idea of using clamps is not mine.I referred to the video which I watched in RUclips in the past. I have forgotten that video.Maybe > > > ruclips.net/video/2xa5bZ_Ek5M/видео.html
It's exactly what I need too. I made a very nice looking woodworking bench but it's used for other purposes as well. I don't want to install a large or not so good looking woodworking vise on it. This vise will fit the bill, and it's not a permanent attachment to my bench.
Great video and process. Excellent idea. Thanks for sharing.
This is Brilliant and just what I need!! =)))))) thank you!!!
A perfect, a great work and a very good idea thanks for sharing :) :) :)
Complimenti una bellissima manualità Fabrizio .italia
Oh man! Thats genius. Easy to carry, simple, and looks like a hard grip. ill do one for me right now
Next on the list to build, is a solid workbench!
It was worth watching this video for the knot filling trick as much as anything.
Marvelous!
Perfect thanks a lot :) :) :)
Nice .. but i think the metaliques parts is mor estitiqual and mor nice if it is in the curving of the wood not in out of this ones ...it's just idea ❤
That was great work but why plug the hole then just throw it away never would have thought to plug a hole like that
You gave me a great idea. Many thanks.
Was that Tung or linseed you applied to the wood? Excellent build. I'm subscribing!
That was polyurethane resin. Woodworking vegetable oils are very expensive in Japan. I want to use beeswax.
Thank you for watching.
@@fareastwood I'm sure Japan has plenty of ancient tricks for woodworking that make up for it!!
Great....I'll do it. Thanks for sharing.
nice. thanks for the video. gotta make this one!
Thank you for the video. What is the chemical you treated the steel with that turned it black?
The chemical has the effect of rust prevention. It is a product similar to Gun Blue. However, it is cheap. Thank you for watching.
Good video and very job..thanks
Clever
素晴らしい仕事!!!....απιθανη δουλεια μπραβο !!!
BRAAAAVOOOOO
I love good ideas . Thank for to share your ideas with us.
It may have been covered elsewhere in the comments but here goes: I liked what you did - simple, affordable and achievable. I'd have liked a subtitle into at least English of what two of the coatings were - the wood coating was simple but I wasn't quite sure what the metal coating was.
BUT! The camera shake was a serious blemish for an otherwise well-produced video. Every time you actually did something, the whole image blurred. A tripod sitting on the floor or a separate table or stool perhaps? Even a piece of timber clamped to something else and overhanging the workbench to mount the camera on.
I enjoyed the light background music - what was it?
Prima Lösung!
Thank you for sharing. Ill have to craft one for myself. Also, beautiful 🎶
Fantastic! I'm watching many of your videos and you have many great ideas and designs. Thank you for sharing these!
5:53 😭😭😭
Стол трясётся -- не ставьте на него камеру.
Отличная работа! Спасибо за музыку!
Pro Tip: don't put the camera on the surface you are hammering on.
Definitely my next project. So many uses!
Nice
Sensacional my friend
10 1/4 long X 4 3/4 wide X 1 3/4 thick. I think I have some white oak firewood that is not going to get burned for this project. Love the idea and design!
Muy lindo trabajo!!!. Gracias por compartir.
It's marvelous, thank you for sharing.
Lovely work and a pleasure to watch, Thank you. Just one question, what was the liquid that you coated the steel with?
It is the liquid for black rust processing. Thank you for watching.
@@fareastwood Thank you :-)
참나 어렵게 허네 ㅎㅎ
I would so very much enjoy your videos WITHOUT the music....listening to you work is music enough!!!
Gonna make one of them!
wonderful vise but please don't put your camera on the work bench. i got so motion sick watching this. thanks
Another day! Another ingenious idea from the Sensei! Thank you.
Сомнительная польза от данного приспособления, но за идею +1
Japanez carpenters and woodmaster is the best of the bestmaster on the world.Each wood works from Japanes hand is the bigest Artwork.Amasing,im impresed.
Well done, and nicely produced presentation
Simple elegance
well design
Whole time I was wondering on what side did that knot ended up. And then you removed it. :)
Excellent. But may I make a humble suggestion: to place the iron angles FLUSH with the Wood jaws, and to use larger iron angles, so you have a larger surface. I would use flat head crews, coutersunk the holes in the iron angles, so that the screw heads don't protrude...just a suggestion! Best Wishes from Mexico.
I think your suggestion is correct. Thank you!
Very simple yet very useful.
Great Job Maestro!
Cheers from Chicago USA...
Awesome vise. I will make one.
はじめまして☺たすかります!すごく良い動画です✨
this is wonderful! I'm going right to my shop now!
こんにちは。金属用の万力は全体に押さえられないのでいまいちかな。
せっかく埋めた死に節の行方が気になる・・・
死に節はゴミ箱に埋葬しました。まさか無駄になるとは。。。
I like your idea of using the steel angle pieces to convert a wood vise to a metal vise. I can use that idea to temporarily convert my bench woodworking vise and my portable workbench for light metal work. Arigatou!
Фильм детектив. Только в конце догадался, что он мастерит. ТИСКИ! ))
Beautyful..! I shall build one myself tomorrow..! Thanks for sharing.
Lovely and a simple idea, I shall be borrowing your design!
Good idea!!! Thank you for sharing this.
👌👌👌
Very Nice! Thank you.
初めましてです。本職は何をされてますか？
良ければ教えて頂きたいです！
土木工事の自営業です。
Thank you. I may use this.
Nice one, even though you had to cut out that -with gr8 effort- put together knot pothole filler…;-))
This is GREAT !!! Thank you.
Seeing you struggle with this makes me think that you really needed a vice in order to make your vice! Nicely done.
No negative comments, you have obviously edited them out.
+aljoe Did you really read all comments? There are 6 negative comments now.
I forgive negative people like you.
self-build.林久 very cool answer 😊
As in Japan, visited ... Quietly, steadily, efficiently, look and have a rest. Thank you!
Excellent video, technic, idea.. . But please next time change the music
Music is awesome 😀😀😀
Nice ...super
良いアイデアだと思いました！途中鉄に塗っているのが何なのか教えてもらえると嬉しいです！
コメントありがとうございます。
ソフト99の「赤サビを黒い防錆被膜に変える」という商品です。
ホームセンターだとカー用品コーナーにありますよ。
@@fareastwood さん ありがとうございます！勉強になります😆
鉄工用の面にバイス部分のL字金具と同じ厚さの鋼板を付けて面合わせしたときの隙間を無くしたいと思ったのは自分だけだろうか?
Q tontería 🙄
As usual, simple is efficient and elegant. It looks like you are full of good ideas!