Hi Raphael, how nice of you to respond. Good to hear that I was able to help you a little with my video. May you enjoy your coffee for a long time to come. Another tip: regularly lubricating the O-rings with a tiny amount of silicone grease will make them last much longer. Have a nice day. Cheers, Marc.
hey Marc! thanks for your video! I've got the same problem. I bought 2 new o-rings and the issue was solved! Now, I will re lubricate the coffee unit. Thanks thanks again! Regards from Argentina.
@leandrorodriguez1600 Thank you for your response Leandro. And you're very welcome. I'm glad to hear that my video helped you. That was exactly the intention. Nice that it works that way. Even all the way in Argentina. 😉 Cheers, Marc.
@@MarcSchiedam funny thing: Previously, I took the machine to an official Phillips service for repairing. They told me that I have to buy a brand new coffee group mecanism!!! Then, I saw your video and fixed it by my self.
@leandrorodriguez1600 " _They told me that I have to buy a brand new coffee group mechanism!!!_ " That's not funny, that's criminal! And a new brew group wouldn't even solve the problem. Fortunately, you did not buy a new brew group and solve the problem yourself. Well done! 🙌 Cheers, Marc.
hey The water that comes into the bowl at the end of the coffee process is that normal? I thought water only came into the bowl during the rinsing process
@Internationalscore Hi, Yes that is normal. In the video there is no coffee in the brew group. And when the brew group opens, the water that is still in it falls into the drip tray.
Here you go. to remove the boiler pin from the machine: ruclips.net/video/OLeCSBsDwuY/видео.html to remove the steam valve from the boiler pin: ruclips.net/video/k6_DcyPLt5s/видео.html
Hi Lorenzo, There are 2 common problems that can cause this. The rings that I replace in the video may be leaking and/or the connector at the output of the thermoblock can be broken. If the connector breaks, it is often after a descaling program. To be sure whether the connector is leaking, it is best to open the machine. It's on the left side of the machine. I don't have a video of that (yet), but someone has posted a video link below to a video with the same problem as you have. The man in the video struggles with the lid but it can be removed. The link: ruclips.net/video/wS-FOZapsKk/видео.html&ab_channel=DavidLogasi
By rinsing do you mean that you make coffee with pre-ground coffee without adding the coffee? Because then the machine does the same thing, except that after making coffee, when opening the brew group, the water is thrown out of the brew group, but that is normal. Otherwise I wouldn't know what is wrong because the machine generates the same pressure on the system with or without coffee.
Yes, after rinsing, the machine also throws the residual water out of the brewing group. That is normal. To test whether the machine is leaking during coffee brewing, you can do the following: -Turn on the machine and wait until it is ready to brew coffee -Then remove the drip tray and waste container, empty it, dry it and put it back in the machine -Then make a (largest) coffee with pre-ground coffee without adding the coffee (as I did in the video) and remove the drip tray after 15 seconds (before the cycle is finished). If it is still dry, the machine will not leak during coffee making, but if there is water in the drip tray, the machine is leaking and it is most likely the O-rings.
6 месяцев назад+1
Is the silicone grease a must? What happens if I use the same grease which comes with the machine to lubricate the brewing unit?
Some water ends up in the tray, but the machine gives up quite fast - so it is not pushing as much water as it normally should. I would guess something is blocking inside the upper part of the unit.
When water ends up in the drip tray, the O-rings on the boiler pin are probably worn out. If you have a blockage, you will have to open the machine to remove it. And you may have problems with the pump. I helped someone with this on a forum, take a look here: www.home-barista.com/repairs/ulka-ep5-pump-replacement-t87226.html
Out of curiosity, were you able to detach the boiler pin from the machine? I ordered the entire part to replace, but I can't get the boiler pin out after unscrewing the two screws.
Hi Diego @diegosiddi, Certainly, I can remove the boiler pin. But it can be a bit tricky sometimes. That's why I made a short video for you on how you can easily remove the boiler pin without damaging it. I hope this will help you. Here is the link: ruclips.net/video/OLeCSBsDwuY/видео.html
Sorry for bothering you, but I changed those o-rings and still there is water leakage. I also change the whole part, change and the nex thing, the white part from the brew. Any suggestions for that case?
Hi @stroyanski5581, I'm not sure I understand what you mean. Do you want to know how to replace the cup on the side of the brewing group? It is screwed on with a Torx 10 screw from the inside of the brewing group and there is a clip that you have to loosen so you can pull the cup out. Or do you mean something else?
@stoyanski5581 So if I understand correctly, you replaced the O-rings, and even the entire boiler pin, and you replaced the cup on the side of the brew group (that slides over the boiler pin). And you still have leakage. If this is correct then my first question would be: how exactly did you test this?
@@MarcSchiedam The check is easy. I remove the under tank for used coffee and water, then I press the button so no error show for missing tank by hand and start the machine. In this way I have eye contact and very clearly I see that it is still leaking
Curious if you have this my issue... my leak is happening on the left side of the unit. I had to remove the left panel to see the leak, which was happening where the Pin with the O-Rings connects. I'm tempted to try new O-Rings however the existing ones look fine to me. Any input you have would be appreciated!
Hi @RicKnelsen, Do you mean it's leaking from the solenoid valve? Or is it leaking at the connection between the solenoid valve and the boiler pin where the two small O-rings are? Is the leak in the compartment where the brew group is located or on the side of the motor? And wear on O-rings is often difficult to notice.
@@MarcSchiedam It is pooling on the side of the motor. I have seen the leak come out directly from the connection point. I tried to upload a video but YT isn't allowing.
@RicKnelsen It is very likely that the O-rings must be the cause of the leak, otherwise either the housing of the solenoid valve or the tube of the boiler pin is broken.
@@MarcSchiedam Ok thanks! I inspected the pin and it looks fine to me. Also, the leak is happening at the connection and therefore the solenoid valve isn't involved in the leak. I will order some new O-Rings and see if that makes a difference.
hi bedankt voor het filmpje. water bij koffie zetten gaat goed. alleen water voor heet water komt niet via heet water spuitstuk er uit. alles gaat direct bakje in. komt dat ook hierdoor? ik zie heel veel filmpjes. is dit een ontwerp fout van philips?
@arjanvandehaar5049 Hoi Arjan, wanneer het heet water (en stoom) bij de zetgroep terecht komt zit waarschijnlijk (vanaf het verwarmingselement) de eerste magneetklep vast. Je kunt deze demonteren en uitelkaar halen om de onderdelen te ontkalken.
@@arjanvandehaar5049 Tja, om het zo te verhelpen moet je idd sleutelen en de machine openen. Zie je dat niet zitten dan kun je het volgende proberen: Haal het waterfilter uit de watertank en vul de watertank voor de helft met ontkalkingsmiddel (geen azijn want die smaak krijg je er moeilijk uit) kies voorgemalen koffie (kies "koffie" en daarna het knopje "koffiesterkte" een aantal seconden ingedrukt houden) maar voeg GEEN gemalen koffie toe en zet een beker onder de uitloop Herhaal dan de volgende stappen een aantal keer: Druk op start en trek 5 seconden nadat er water uit de uitloop komt de stekker eruit Laat de machine zo een kwartier staan, doe dan de stekker er weer in en zet de machine weer aan Gooi de beker leeg, zet hem weer onder de uitloop en herhaal weer vanaf "Druk op start en terk 5 sec....." Probeer na diverse keren ook een keer, met ontkalkingsmiddel in de watertank, heet water te tappen. Misschien dat het zo lukt de klep weer werkend te krijgen. Na de laatste keer gebruik met ontkalkingsmiddel de watertank leeggooien, omspoelen, vullen met water en de machine goed spoelen door heet water te tappen en weer een aantal keer koffie te zetten zonder gemalen koffie. Daarna de zetgroep onder de kraan spoelen en het waterfilter weer in de waterbak plaatsen. Waarschijnlijk moet daarna de machine nog ontlucht worden. Na het aanzetten gaat dan de startknop knipperen. Plaats een beker onder de wateruitloop en druk op start. De machine gaat dan ontluchten. Veel dingen zal je wel kennen maar ik probeer het zo duidelijk mogelijk uit te leggen. Voor het demonteren en ontkalken van de magneetklep ga ik proberen een video te maken wanneer ik daar de tijd voor heb. Succes.
@sweethelen89 Hello LadyCherrysh, Security is bypassed in the video. It's not safe to do so I don't recommend doing it yourself. It was just so I could film the inside of the machine. But there is a safe way to check if your machine is leaking. You do this as follows: -turn on the machine and wait until it is warm and ready to make coffee. -clean the drip tray and waste container and dry thoroughly -Replace the drip tray and container and place a large cup under the coffee spout. -select a large coffee, set the coffee strength to pre-ground coffee (hold the strength button for a few seconds until it is set to pre-ground coffee, as I do in the video), of course you do not add pre-ground coffee, select the coffee /water quantity to maximum (3 lights) and press the start button. -wait until the water starts running, when the water runs count 25 seconds and then remove the drip tray (that is during the cycle), the machine stops making coffee. -check the drip tray to see if there is (more than a few drops) of water in it. -put the drip tray (and cup) back and press start, the machine will now complete the cycle. If there were more than a few drops of water in the drip tray, the machine is leaking and it is very likely that these rings are the culprit. If the drip tray is (almost) dry, you will have no problem there. This is all about water, but you can also do this test with coffee. Because when you do the same test with coffee and there is coffee in the drip tray, the brew group leaks at the top. I hope my explanation is clear for now and useful to you. I will make a RUclips video of it in the near future. I wish you a nice day. Cheers, Marc.
Hallo Wendy, ja, máár, hoewel ik je graag zou helpen heb ik op dit moment echt geen tijd voor onderhoud en/of grote reparaties. Wanneer het iets kleins is kan ik misschien nog iets voor je doen maar dan zal je meer informatie over je machine en de problemen moet geven. Dat kan je het beste niet hier doen maar via email. (adres staat in de informatie van dit kanaal). Prettige avond, Marc.
@@MarcSchiedam thank you so much. I can use anyone that's food grade? I searched and here in Mexico I just find the original and it's too expensive for 5grs and take a lot of time of shipment
Maybe this is an option? es.aliexpress.com/item/1005006102314088.html?spm=a2g0o.productlist.main.7.107860dffARh2M&algo_pvid=1d0c66fd-2e5f-4682-980c-79b016e1e5da&algo_exp_id=1d0c66fd-2e5f-4682-980c-79b016e1e5da-3&pdp_npi=4%40dis%21MXN%2153.96%2126.97%21%21%2122.09%21%21%402103241116991359990478360edf0f%2112000035752199496%21sea%21MX%212730952439%21&curPageLogUid=Rd3OUiCNUd0n&gatewayAdapt=glo2nld
Bedankt voor de tip. Dit hebben we ook zo gedaan maar nu hebben we als gevolg dat het water blijft vastzitten daar waar we het vervangen hebben. Als ik dat onderdeeltje uithaal, stoomt het ontzettend. Nog steeds geen koffie 😢
Hallo, Dan kan het zijn dat de klep die in de boiler pin zit vast zit óf dat er een verstopping in de zetgroep zit. De zetgroep goed schoonmaken en hoe je de klep uit de boiler pin haalt vind je in deze video: ruclips.net/video/k6_DcyPLt5s/видео.html Ik hoop dat je hier wat aan hebt. Met vriendelijke groet, Marc.
Hoi Sander, Leuk dat je reageert, bedankt daarvoor. Hier kun je de ringetjes vinden: link.marktplaats.nl/m2017630393 Het is inderdaad erg simpel dus het moet lukken. Succes met het vervangen van de ringetjes..
@johnvanommen1 Hoi John de ringetjes staan nog op eBay of wanneer je daar niet wilt bestellen kun je me een e-mail sturen. M'n e-mailadres staat in de informatie van dit kanaal. www.ebay.nl/itm/186104576371
@johnvanommen1 Tja ik weet het ook niet hoor, het e-mailadres staat op "zichtbaar voor iedereen". Het adres staat op het etiket in deze video: ruclips.net/video/hQ0sLSSH9YA/видео.html
Dag Marc, bedankt voor de mooie en duidelijke video! Helaas heb ik de rubbers vervangen, zelfs de 2 achter de boiler pin, heb de boiler pin geopend en die heb ik niet vervangen gezien deze een andere kleur hebben. Het machine lekt nog altijd water en drupt onderaan de machine eruit. Wat zou het nog kunnen zijn denk je? Alvast bedankt
Hallo @selimyilmaz1985, Wat vervelend. Je kunt die groene O-ring probleemloos vervangen voor een rode siliconen O-ring. Maar die ringen zijn vaak niet de oorzaak. Hoe heb je precies getest of je nog kekkage hebt?
Dag Marc, bedankt voor je snelle feedback. Wel ik merk dat na het maken van de koffie er onmiddellijk water sijpelt. Ik heb zonet de 2 groene o ringen door rode vervangen en het probleem blijft. Ik heb een videotje gemaakt en op mijn account geplaatst.. als je eens tijd hebt... alvast bedankt
Hi Selim, de oorzaak van de lekkage is bijna zeker het (witte) koppelstuk op de uitgang van het verwarmingselement. Hier zijn foto's van het onderdeel: photos.app.goo.gl/9A9svsDfQsm8oTae7
Hi Marc, Bij ons krijg je veel stoom na het zeggen van een cappuccino. Appart blijft stomen totdat je weer op de start knop drukt. Reset van 10 sec (stekker eruit) heeft ervoor gezorgd dat die wel stopt met stomen maar het is veel stoom wat er uit komt. Schoonmaken, reset hebben we geprobeerd. Waar moeten we zoeken ?
Hoi Ridouan, ik ga er even van uit dat het gaat om een apparaat uit dezelfde serie van Philips zoals in de video getoond. Het is op afstand moeilijk te zeggen wat er aan de hand is maar ik zal uitleggen hoe het mechanisme van de stoom werkt. Het apparaat stuurt vanaf een printplaat een stroom naar een relais dat een magneetklep opent die dan de stoom doorlaat dat vanaf het verwarmingselement via een andere magneetklep (voor de koffie) stroomt. Wanneer er stoom uit de stoombuis (waar de melk mee wordt verwarmd) komt dan blijft dus de magneetklep open staan. Ik denk dat je een "Latte go" apparaat hebt (omdat je het over capuccino hebt). Dan wordt de tijd dat de magneetklep geopend wordt automatisch geregeld. Zou nu de magneetklep vastzitten (bijvoorbeeld door kalk) en daardoor open blijven staan dan zou deze niet "herstellen" na een reset wanneer je de stekker eruit trekt. Dus ik denk (nogmaals, lastig te bepalen op afstand) dat dit een fout is in de aansturing. Dat zou dan op de printplaat moeten zitten. En een reparatie van de printplaat kan wel, maar dan moet je wel (veel) verstand van elektronica hebben. Ik kan je daarmee op afstand niet helpen, daarvoor is dat veel te ingewikkeld. Een printplaat is ook niet makkelijk te testen dus je hebt denk ik een lastig probleem. Een printplaat is wel te vervangen maar die is niet goedkoop. De hele leiding die van het verwarmingselement naar de uitgang van de stoom gaat zit links in het apparaat. De 2e magneetklep in de leiding is die voor de stoom. Nog even een waarschuwing: ik probeer met je mee te denken, het biedt je natuurlijk geen garanties. Ik kan immers, zonder het apparaat te hebben gezien, nooit precies bepalen wat er mis is. Dus het kopen van nieuwe onderdelen is geheel op eigen verantwoordelijkheid. Ondanks dat ik niet een pasklaar antwoord voor je heb hoop ik dat ik je hiermee toch een beetje heb kunnen helpen. Sorry dat ik niet meer voor je kan doen. Succes met de reparatie. Groeten, Marc.
Dank voor je snelle reactie Betreft inderdaad de latte go. Na de rest heeft die 1 x normaal gewerkt en daarna weer veel stoom. Het vervangen van de ringen heeft dus geen nut?
Wanneer je de ringetjes op de video bedoelt dan heeft dat inderdaad geen zin. Daar komt, als het goed is, alleen water langs bij het koffiezetten en is afgesloten wanneer stoom wordt geleverd.
heb de tip die u aan iemand anders gaf uitgevoerd (schone droge lekbak en dan grote koffie van poeder zonder poeder.. dus water gezet) er komt water in de lekbak, meer dan een paar druppels ongeveer een borrelglaasje vol. het probleem: de machine zet gewoon koffie maar lekt water onder het apparaat. als ik onder de lekbak in t apparaat kijk is het nat. het water lijkt dan links achter vandaan te komen (maar ben niet zeker omdat t dan niet meer stroomt) ik heb o-ringen besteld maar kan dit t probleem zijn? kan ik nog iets doen om er achter te komen? (ik heb de ep3221)
Hi @klickspeur4342 Wanneer er water lekt in de lekbak komt, komt dat in 99,9% van de gevallen door de ringetjes. Dat de machine gewoon koffie zet klopt, alleen de kopje worden minder vol en je koffie wordt sterker (want er stroomt minder water doorheen). Andere mogelijkheden zijn: 1. dat er een scheur zit in het kupje dat aan de zijkant van de zetgroep zit en over de tuit met de ringetjes schuift. 2. Er zit een O-ring (diep) in de zetgroep die de grijze zuigerstang afsluit, deze kan lekken. Maar dan "valt" het water meestal in de lekbak en loopt het daar niet onderdoor de machine uit. 3. Links achterin de machine zit ook een koppeling op de uitgang van het verwarmingselement dat kan scheuren. Dat komt ook regelmatig voor (meestal na ontkalken onstaat daar een verstopping en barst de koppeling). Maar dan komt het water * niet* in de lekbak maar loop direct onder de machine vandaan. Het meest logische is dus dat de ringetjes zijn versleten, al is een combinatie van bovenstaande problemen natuurlijk ook mogelijk. Ik zou in jouw geval de ringetjes vervangen en dan kijken of het opgelost is en daarna verder kijken. Want zoals ik al zei is het met de ringetjes in 99,9% van de gevallen opgelost. En nog een tip aan iedereen: smeer de ringetjes bij de weekelijkse reinigings-/spoelbeurt van de zetgroep met een piepklein beetje siliconenvet en ze gaan echt veel langer mee. De zachte siliconen ringen droog laten en ze zijn binnen no-time versleten. Succes met de reparatie. Marc.
ik heb de 2 ringetjes van het boilerpijpje en die grote van de brouwgroep vervangen. alleen het probleem is niet opgelost. ik wil nu de 2 kleine ringetjes aan het pijpje vervangen waarvoor het pijpje uit de machine moet. wel twijfel ik nu of dat het probleem kan zijn..
ook die 2 ringetjes van de boilerpin in t apparaat zijn vervangen (handige tip van de 2 tyraps!!) nu ga ik afwachten wat de machine doet qua lekken. de test met een grote gemalen koffie zonder koffie leverde dezelfde hoeveelheid water in de lekbak. ongeveer evenveel als van het spoelen bij het uitzetten. ik wacht het af..
Thank you ver much Marc! I'm from Brazil and I have a Royal Crema Saeco. Your video helped me a lot, I managed to solve this problem.
Hi Raphael, how nice of you to respond. Good to hear that I was able to help you a little with my video. May you enjoy your coffee for a long time to come.
Another tip: regularly lubricating the O-rings with a tiny amount of silicone grease will make them last much longer.
Have a nice day.
Cheers,
Marc.
Thanks a lot, as soon as i saw you had the exact same problem i changed the oring and fixed it!
You're welcome Jonathan.
Good job. 👍 And very nice that my video helped you solve the problem.
Cheers.
hey Marc! thanks for your video! I've got the same problem. I bought 2 new o-rings and the issue was solved! Now, I will re lubricate the coffee unit.
Thanks thanks again!
Regards from Argentina.
@leandrorodriguez1600
Thank you for your response Leandro. And you're very welcome.
I'm glad to hear that my video helped you. That was exactly the intention. Nice that it works that way. Even all the way in Argentina. 😉
Cheers, Marc.
@@MarcSchiedam funny thing: Previously, I took the machine to an official Phillips service for repairing. They told me that I have to buy a brand new coffee group mecanism!!!
Then, I saw your video and fixed it by my self.
@leandrorodriguez1600
" _They told me that I have to buy a brand new coffee group mechanism!!!_ "
That's not funny, that's criminal! And a new brew group wouldn't even solve the problem.
Fortunately, you did not buy a new brew group and solve the problem yourself. Well done! 🙌
Cheers, Marc.
Bedankt Marc! Dit was precies wat er bij mij ook aan de hand was.
Bedankt voor je leuke reactie Timon. 👍 Dat waardeer ik zeer.
Thank for your video, I have same problem with my coffee machine ❤
You are welcome @rayminghsu9464. Succes fixing the isseu.
Top...video's zijn echt behulpzaam👌👍
Bedankt. Leuk dat je er wat aan had. 😃
Marc, bedankt voor het maken van het filmpje 👍
Bedankt voor je reacie Barry. Ik heb het graag gedaan. 👍
hey
The water that comes into the bowl at the end of the coffee process is that normal? I thought water only came into the bowl during the rinsing process
@Internationalscore Hi, Yes that is normal. In the video there is no coffee in the brew group. And when the brew group opens, the water that is still in it falls into the drip tray.
Could you show how you disassembled that part?
Here you go.
to remove the boiler pin from the machine:
ruclips.net/video/OLeCSBsDwuY/видео.html
to remove the steam valve from the boiler pin:
ruclips.net/video/k6_DcyPLt5s/видео.html
hi, the water comes out from under me when I brew the coffee, what should I do? Thank you
Hi Lorenzo,
There are 2 common problems that can cause this. The rings that I replace in the video may be leaking and/or the connector at the output of the thermoblock can be broken. If the connector breaks, it is often after a descaling program. To be sure whether the connector is leaking, it is best to open the machine. It's on the left side of the machine. I don't have a video of that (yet), but someone has posted a video link below to a video with the same problem as you have. The man in the video struggles with the lid but it can be removed.
The link:
ruclips.net/video/wS-FOZapsKk/видео.html&ab_channel=DavidLogasi
Hey! I have this problem only when rinsing! I didn’t found ripped o-ring there! What could be the problem?
By rinsing do you mean that you make coffee with pre-ground coffee without adding the coffee? Because then the machine does the same thing, except that after making coffee, when opening the brew group, the water is thrown out of the brew group, but that is normal. Otherwise I wouldn't know what is wrong because the machine generates the same pressure on the system with or without coffee.
@@MarcSchiedam there is a “rinsing” cycle when power off and power on
Yes, after rinsing, the machine also throws the residual water out of the brewing group. That is normal.
To test whether the machine is leaking during coffee brewing, you can do the following:
-Turn on the machine and wait until it is ready to brew coffee
-Then remove the drip tray and waste container, empty it, dry it and put it back in the machine
-Then make a (largest) coffee with pre-ground coffee without adding the coffee (as I did in the video) and remove the drip tray after 15 seconds (before the cycle is finished).
If it is still dry, the machine will not leak during coffee making, but if there is water in the drip tray, the machine is leaking and it is most likely the O-rings.
Is the silicone grease a must? What happens if I use the same grease which comes with the machine to lubricate the brewing unit?
The grease that comes with your machine is silicone grease. 😉
@@MarcSchiedam good to know :) thanks!
You are welcome.István.
@@MarcSchiedam replacing the sealing rings worked, thank you so much!
👍🍻
In my case it works with hot water but no coffee is coming out, any idea what might be wrong? The brewery unit is clean...
Hi, that can be a few things. If you make coffee does the water end up in the drip tray or is it going to the hot water spout?
Some water ends up in the tray, but the machine gives up quite fast - so it is not pushing as much water as it normally should. I would guess something is blocking inside the upper part of the unit.
When water ends up in the drip tray, the O-rings on the boiler pin are probably worn out. If you have a blockage, you will have to open the machine to remove it. And you may have problems with the pump. I helped someone with this on a forum, take a look here:
www.home-barista.com/repairs/ulka-ep5-pump-replacement-t87226.html
@@MarcSchiedam I separated the brewing unit again, cleaned it and then replaced the big sealing on the unit - now it works!
Great!
BTW if the big O-ring leaks it will be coffee leaking, not water.
Cheers, Marc.
Out of curiosity, were you able to detach the boiler pin from the machine? I ordered the entire part to replace, but I can't get the boiler pin out after unscrewing the two screws.
Hi Diego @diegosiddi,
Certainly, I can remove the boiler pin. But it can be a bit tricky sometimes. That's why I made a short video for you on how you can easily remove the boiler pin without damaging it. I hope this will help you.
Here is the link:
ruclips.net/video/OLeCSBsDwuY/видео.html
Sorry for bothering you, but I changed those o-rings and still there is water leakage. I also change the whole part, change and the nex thing, the white part from the brew. Any suggestions for that case?
Hi @stroyanski5581,
I'm not sure I understand what you mean. Do you want to know how to replace the cup on the side of the brewing group? It is screwed on with a Torx 10 screw from the inside of the brewing group and there is a clip that you have to loosen so you can pull the cup out.
Or do you mean something else?
@ i did this, everything you wrote, but no effect. Even with new o-rings its leaking from there
@stoyanski5581 So if I understand correctly, you replaced the O-rings, and even the entire boiler pin, and you replaced the cup on the side of the brew group (that slides over the boiler pin). And you still have leakage.
If this is correct then my first question would be: how exactly did you test this?
@@MarcSchiedam The check is easy. I remove the under tank for used coffee and water, then I press the button so no error show for missing tank by hand and start the machine. In this way I have eye contact and very clearly I see that it is still leaking
@stoyanski5581 Okay great. Can you make a video of that so I can see what goes wrong?
where did you get the replacement "O" rings from?
Any O-ring supplier can supply you with these O-rings. And you can also buy sets online.
Do you know exact measurements of the o-rings like the width, outer ir inner diameter? Thanks in advance
The upper one is 9x2mm (IDxCS) =13mm OD the lower one is 5x2mm =9mm OD.
@@MarcSchiedam thanks! Very helpful information
Curious if you have this my issue... my leak is happening on the left side of the unit. I had to remove the left panel to see the leak, which was happening where the Pin with the O-Rings connects. I'm tempted to try new O-Rings however the existing ones look fine to me. Any input you have would be appreciated!
Hi @RicKnelsen,
Do you mean it's leaking from the solenoid valve? Or is it leaking at the connection between the solenoid valve and the boiler pin where the two small O-rings are? Is the leak in the compartment where the brew group is located or on the side of the motor?
And wear on O-rings is often difficult to notice.
@@MarcSchiedam So to clarify.. the leak is happening at the connection as you mentioned. Do you think O-rings would solve?
@@MarcSchiedam It is pooling on the side of the motor. I have seen the leak come out directly from the connection point. I tried to upload a video but YT isn't allowing.
@RicKnelsen It is very likely that the O-rings must be the cause of the leak, otherwise either the housing of the solenoid valve or the tube of the boiler pin is broken.
@@MarcSchiedam Ok thanks! I inspected the pin and it looks fine to me. Also, the leak is happening at the connection and therefore the solenoid valve isn't involved in the leak.
I will order some new O-Rings and see if that makes a difference.
hi bedankt voor het filmpje. water bij koffie zetten gaat goed. alleen water voor heet water komt niet via heet water spuitstuk er uit. alles gaat direct bakje in. komt dat ook hierdoor? ik zie heel veel filmpjes. is dit een ontwerp fout van philips?
@arjanvandehaar5049 Hoi Arjan, wanneer het heet water (en stoom) bij de zetgroep terecht komt zit waarschijnlijk (vanaf het verwarmingselement) de eerste magneetklep vast. Je kunt deze demonteren en uitelkaar halen om de onderdelen te ontkalken.
@@MarcSchiedam marc bedankt, maar geen idee hoe ik dat zou moeten doen, maar klinkt wel als het probleem
@@arjanvandehaar5049 Tja, om het zo te verhelpen moet je idd sleutelen en de machine openen. Zie je dat niet zitten dan kun je het volgende proberen:
Haal het waterfilter uit de watertank en vul de watertank voor de helft met ontkalkingsmiddel (geen azijn want die smaak krijg je er moeilijk uit)
kies voorgemalen koffie (kies "koffie" en daarna het knopje "koffiesterkte" een aantal seconden ingedrukt houden) maar voeg GEEN gemalen koffie toe en zet een beker onder de uitloop
Herhaal dan de volgende stappen een aantal keer:
Druk op start en trek 5 seconden nadat er water uit de uitloop komt de stekker eruit
Laat de machine zo een kwartier staan, doe dan de stekker er weer in en zet de machine weer aan
Gooi de beker leeg, zet hem weer onder de uitloop en herhaal weer vanaf "Druk op start en terk 5 sec....."
Probeer na diverse keren ook een keer, met ontkalkingsmiddel in de watertank, heet water te tappen.
Misschien dat het zo lukt de klep weer werkend te krijgen.
Na de laatste keer gebruik met ontkalkingsmiddel de watertank leeggooien, omspoelen, vullen met water en de machine goed spoelen door heet water te tappen en weer een aantal keer koffie te zetten zonder gemalen koffie. Daarna de zetgroep onder de kraan spoelen en het waterfilter weer in de waterbak plaatsen. Waarschijnlijk moet daarna de machine nog ontlucht worden. Na het aanzetten gaat dan de startknop knipperen. Plaats een beker onder de wateruitloop en druk op start. De machine gaat dan ontluchten.
Veel dingen zal je wel kennen maar ik probeer het zo duidelijk mogelijk uit te leggen.
Voor het demonteren en ontkalken van de magneetklep ga ik proberen een video te maken wanneer ik daar de tijd voor heb.
Succes.
How did you start the machine without the tray? Mine doesn’t let me do it😢 I would like to check if it’s the same problem
@sweethelen89
Hello LadyCherrysh,
Security is bypassed in the video. It's not safe to do so I don't recommend doing it yourself. It was just so I could film the inside of the machine. But there is a safe way to check if your machine is leaking. You do this as follows:
-turn on the machine and wait until it is warm and ready to make coffee.
-clean the drip tray and waste container and dry thoroughly
-Replace the drip tray and container and place a large cup under the coffee spout.
-select a large coffee, set the coffee strength to pre-ground coffee (hold the strength button for a few seconds until it is set to pre-ground coffee, as I do in the video), of course you do not add pre-ground coffee, select the coffee /water quantity to maximum (3 lights) and press the start button.
-wait until the water starts running, when the water runs count 25 seconds and then remove the drip tray (that is during the cycle), the machine stops making coffee.
-check the drip tray to see if there is (more than a few drops) of water in it.
-put the drip tray (and cup) back and press start, the machine will now complete the cycle.
If there were more than a few drops of water in the drip tray, the machine is leaking and it is very likely that these rings are the culprit. If the drip tray is (almost) dry, you will have no problem there.
This is all about water, but you can also do this test with coffee. Because when you do the same test with coffee and there is coffee in the drip tray, the brew group leaks at the top.
I hope my explanation is clear for now and useful to you. I will make a RUclips video of it in the near future.
I wish you a nice day.
Cheers,
Marc.
Dekuji 👍👍👍👍👍
Neříkej to. 😀
Doe je ook reparaties? Ik denk dat ik bij jou een stuk sneller geholpen ben dan wanneer ik het hele apparaat moet laten opsturen 😳
Hallo Wendy,
ja, máár, hoewel ik je graag zou helpen heb ik op dit moment echt geen tijd voor onderhoud en/of grote reparaties. Wanneer het iets kleins is kan ik misschien nog iets voor je doen maar dan zal je meer informatie over je machine en de problemen moet geven. Dat kan je het beste niet hier doen maar via email. (adres staat in de informatie van dit kanaal).
Prettige avond,
Marc.
Hi. What grease did you use? You have the Amazon link?
Hi, it's "food grade silicone grease", when you search for that on amazon you will find many results that you can use.
@@MarcSchiedam thank you so much. I can use anyone that's food grade? I searched and here in Mexico I just find the original and it's too expensive for 5grs and take a lot of time of shipment
You are welcome. And sure, as long as it's food safe you can use it.
Maybe this is an option?
es.aliexpress.com/item/1005006102314088.html?spm=a2g0o.productlist.main.7.107860dffARh2M&algo_pvid=1d0c66fd-2e5f-4682-980c-79b016e1e5da&algo_exp_id=1d0c66fd-2e5f-4682-980c-79b016e1e5da-3&pdp_npi=4%40dis%21MXN%2153.96%2126.97%21%21%2122.09%21%21%402103241116991359990478360edf0f%2112000035752199496%21sea%21MX%212730952439%21&curPageLogUid=Rd3OUiCNUd0n&gatewayAdapt=glo2nld
@@MarcSchiedam thank you brother!
Bedankt voor de tip. Dit hebben we ook zo gedaan maar nu hebben we als gevolg dat het water blijft vastzitten daar waar we het vervangen hebben. Als ik dat onderdeeltje uithaal, stoomt het ontzettend. Nog steeds geen koffie 😢
Hallo, Dan kan het zijn dat de klep die in de boiler pin zit vast zit óf dat er een verstopping in de zetgroep zit. De zetgroep goed schoonmaken en hoe je de klep uit de boiler pin haalt vind je in deze video:
ruclips.net/video/k6_DcyPLt5s/видео.html
Ik hoop dat je hier wat aan hebt.
Met vriendelijke groet,
Marc.
@@MarcSchiedam 🙏 dankjewel. Video is wel privé
Ja klopt. De video heb ik ooit speciaal voor iemand gemaakt, maar ik heb hem nu "openbaar" gezet.
Hoi Marc, bedankt voor het filmpje. Ik ga de nieuwe o ringen bestellen. Vervangen moet niet als te moeilijk zijn als ik het zo bekijk.
Hoi Sander, Leuk dat je reageert, bedankt daarvoor. Hier kun je de ringetjes vinden: link.marktplaats.nl/m2017630393
Het is inderdaad erg simpel dus het moet lukken. Succes met het vervangen van de ringetjes..
@johnvanommen1 Hoi John de ringetjes staan nog op eBay of wanneer je daar niet wilt bestellen kun je me een e-mail sturen. M'n e-mailadres staat in de informatie van dit kanaal.
www.ebay.nl/itm/186104576371
@@johnvanommen1
www.youtube.com/@MarcSchiedam/community
klik op "...meer" daar vind je het e-mailadres.
@johnvanommen1
Tja ik weet het ook niet hoor, het e-mailadres staat op "zichtbaar voor iedereen".
Het adres staat op het etiket in deze video:
ruclips.net/video/hQ0sLSSH9YA/видео.html
Nu de o ringen vervangen zijn geen lekkage meer 👍
Dag Marc, bedankt voor de mooie en duidelijke video! Helaas heb ik de rubbers vervangen, zelfs de 2 achter de boiler pin, heb de boiler pin geopend en die heb ik niet vervangen gezien deze een andere kleur hebben. Het machine lekt nog altijd water en drupt onderaan de machine eruit. Wat zou het nog kunnen zijn denk je? Alvast bedankt
Hallo @selimyilmaz1985,
Wat vervelend. Je kunt die groene O-ring probleemloos vervangen voor een rode siliconen O-ring. Maar die ringen zijn vaak niet de oorzaak.
Hoe heb je precies getest of je nog kekkage hebt?
Dag Marc, bedankt voor je snelle feedback. Wel ik merk dat na het maken van de koffie er onmiddellijk water sijpelt. Ik heb zonet de 2 groene o ringen door rode vervangen en het probleem blijft. Ik heb een videotje gemaakt en op mijn account geplaatst.. als je eens tijd hebt... alvast bedankt
Hi Selim, de oorzaak van de lekkage is bijna zeker het (witte) koppelstuk op de uitgang van het verwarmingselement.
Hier zijn foto's van het onderdeel:
photos.app.goo.gl/9A9svsDfQsm8oTae7
Ooh leuk, is nog beschikbaar online zie ik. Is er toevallig een filmpje van online hoe dit te vervangen is? Of heb je enige tips? Thanks nogmaals
Zit hier ook een soort pakking of o ring in? Of zou dit onderdeel gebarsten of uitgezet zijn met de tijd?
Thanks my friend
👍 You are welcome Yavuz.
What is the size of the ring
The upper one is 9x2mm (IDxCS) the lower one is 5x2mm.
@@MarcSchiedam Is dat de binnenmaat plus de dikte van de o-ring?
@@mnadorp6778 Ja.
Hi Marc,
Bij ons krijg je veel stoom na het zeggen van een cappuccino.
Appart blijft stomen totdat je weer op de start knop drukt.
Reset van 10 sec (stekker eruit) heeft ervoor gezorgd dat die wel stopt met stomen maar het is veel stoom wat er uit komt.
Schoonmaken, reset hebben we geprobeerd.
Waar moeten we zoeken ?
Hoi Ridouan,
ik ga er even van uit dat het gaat om een apparaat uit dezelfde serie van Philips zoals in de video getoond. Het is op afstand moeilijk te zeggen wat er aan de hand is maar ik zal uitleggen hoe het mechanisme van de stoom werkt. Het apparaat stuurt vanaf een printplaat een stroom naar een relais dat een magneetklep opent die dan de stoom doorlaat dat vanaf het verwarmingselement via een andere magneetklep (voor de koffie) stroomt. Wanneer er stoom uit de stoombuis (waar de melk mee wordt verwarmd) komt dan blijft dus de magneetklep open staan. Ik denk dat je een "Latte go" apparaat hebt (omdat je het over capuccino hebt). Dan wordt de tijd dat de magneetklep geopend wordt automatisch geregeld.
Zou nu de magneetklep vastzitten (bijvoorbeeld door kalk) en daardoor open blijven staan dan zou deze niet "herstellen" na een reset wanneer je de stekker eruit trekt. Dus ik denk (nogmaals, lastig te bepalen op afstand) dat dit een fout is in de aansturing. Dat zou dan op de printplaat moeten zitten. En een reparatie van de printplaat kan wel, maar dan moet je wel (veel) verstand van elektronica hebben. Ik kan je daarmee op afstand niet helpen, daarvoor is dat veel te ingewikkeld. Een printplaat is ook niet makkelijk te testen dus je hebt denk ik een lastig probleem. Een printplaat is wel te vervangen maar die is niet goedkoop.
De hele leiding die van het verwarmingselement naar de uitgang van de stoom gaat zit links in het apparaat. De 2e magneetklep in de leiding is die voor de stoom.
Nog even een waarschuwing: ik probeer met je mee te denken, het biedt je natuurlijk geen garanties. Ik kan immers, zonder het apparaat te hebben gezien, nooit precies bepalen wat er mis is. Dus het kopen van nieuwe onderdelen is geheel op eigen verantwoordelijkheid.
Ondanks dat ik niet een pasklaar antwoord voor je heb hoop ik dat ik je hiermee toch een beetje heb kunnen helpen. Sorry dat ik niet meer voor je kan doen. Succes met de reparatie.
Groeten,
Marc.
Dank voor je snelle reactie
Betreft inderdaad de latte go.
Na de rest heeft die 1 x normaal gewerkt en daarna weer veel stoom.
Het vervangen van de ringen heeft dus geen nut?
Wanneer je de ringetjes op de video bedoelt dan heeft dat inderdaad geen zin. Daar komt, als het goed is, alleen water langs bij het koffiezetten en is afgesloten wanneer stoom wordt geleverd.
heb de tip die u aan iemand anders gaf uitgevoerd (schone droge lekbak en dan grote koffie van poeder zonder poeder.. dus water gezet)
er komt water in de lekbak, meer dan een paar druppels ongeveer een borrelglaasje vol.
het probleem:
de machine zet gewoon koffie maar lekt water onder het apparaat. als ik onder de lekbak in t apparaat kijk is het nat. het water lijkt dan links achter vandaan te komen (maar ben niet zeker omdat t dan niet meer stroomt)
ik heb o-ringen besteld maar kan dit t probleem zijn?
kan ik nog iets doen om er achter te komen? (ik heb de ep3221)
Hi @klickspeur4342
Wanneer er water lekt in de lekbak komt, komt dat in 99,9% van de gevallen door de ringetjes. Dat de machine gewoon koffie zet klopt, alleen de kopje worden minder vol en je koffie wordt sterker (want er stroomt minder water doorheen).
Andere mogelijkheden zijn:
1. dat er een scheur zit in het kupje dat aan de zijkant van de zetgroep zit en over de tuit met de ringetjes schuift.
2. Er zit een O-ring (diep) in de zetgroep die de grijze zuigerstang afsluit, deze kan lekken. Maar dan "valt" het water meestal in de lekbak en loopt het daar niet onderdoor de machine uit.
3. Links achterin de machine zit ook een koppeling op de uitgang van het verwarmingselement dat kan scheuren. Dat komt ook regelmatig voor (meestal na ontkalken onstaat daar een verstopping en barst de koppeling). Maar dan komt het water * niet* in de lekbak maar loop direct onder de machine vandaan.
Het meest logische is dus dat de ringetjes zijn versleten, al is een combinatie van bovenstaande problemen natuurlijk ook mogelijk. Ik zou in jouw geval de ringetjes vervangen en dan kijken of het opgelost is en daarna verder kijken. Want zoals ik al zei is het met de ringetjes in 99,9% van de gevallen opgelost.
En nog een tip aan iedereen: smeer de ringetjes bij de weekelijkse reinigings-/spoelbeurt van de zetgroep met een piepklein beetje siliconenvet en ze gaan echt veel langer mee. De zachte siliconen ringen droog laten en ze zijn binnen no-time versleten.
Succes met de reparatie.
Marc.
@@MarcSchiedambedankt voor het uitgebreide antwoord! ik krijg de ringetjes (een set van 15 zoiets) dinsdag binnen. ben nieuwsgierig of het me lukt.😊
Graag gedaan. Het gaat je wel lukken hoor, het is niet zo ingewikkeld. Succes. 💪
ik heb de 2 ringetjes van het boilerpijpje en die grote van de brouwgroep vervangen. alleen het probleem is niet opgelost. ik wil nu de 2 kleine ringetjes aan het pijpje vervangen waarvoor het pijpje uit de machine moet.
wel twijfel ik nu of dat het probleem kan zijn..
ook die 2 ringetjes van de boilerpin in t apparaat zijn vervangen (handige tip van de 2 tyraps!!)
nu ga ik afwachten wat de machine doet qua lekken.
de test met een grote gemalen koffie zonder koffie leverde dezelfde hoeveelheid water in de lekbak. ongeveer evenveel als van het spoelen bij het uitzetten. ik wacht het af..
Hi bro, ı wanna this orings , hop can ı but , can you prefer ant sites? Thanks
Hi, I can help you with that, no problem. Send me an email at marc.schiedamATgmailDOTcom and i'll help you.
Bro, sites please? I dont use mail, can you tell sites name pls:) thanks …
Okay, which country do you live in?
www.ebay.nl/itm/186104576371
@@MarcSchiedam Do you know the diameter of these rings?