PHILIPS EP5441 common leak problem

Поделиться
HTML-код
  • Опубликовано: 8 фев 2025

Комментарии • 25

  • @martijnwemmers7903
    @martijnwemmers7903 Месяц назад +1

    Thanks a lot! I wanted to throw my machine away, now it is working again! Great stuff!

  • @beanmeup9902
    @beanmeup9902 Год назад +2

    Hi Milen!! So amazing to have new content from you! Bravo!! An incredible video and Brilliant fix!

  • @norbertkonkoly6698
    @norbertkonkoly6698 Год назад +7

    Great video again! The two little O-ring size is: 3.68x1.78.

    • @AntonioGPS
      @AntonioGPS 7 месяцев назад +1

      4x2.you mean..

    • @Wando64
      @Wando64 2 месяца назад

      @@AntonioGPS the 3.69 x 1,78 exist. OR 2015SIL

  • @e125
    @e125 20 дней назад

    I have a leakage below the machine, the water is not runing to the tray. It's warm, so it can't come directly from the watercontainer. When I make just hot water, then there are no leakage. Thanks for the video, i'll look these O-rings.

  • @levikalmar
    @levikalmar 5 месяцев назад

    Great video!
    Thank you!

  • @BETTERPEAK-rs6rj
    @BETTERPEAK-rs6rj 19 дней назад

    I have a Saeco Royal Professional and when I turn it on the "Fill Water Tank" message comes on right away and I can't get rid of it. The tank is full, I have replaced the magnetic sensor inside the machine under the tank, the float is working in the tank but it won't go away, Any suggestions would be greatly appreciated

  • @pespirot
    @pespirot Год назад

    Great video. I have a problem with my delonghi infuser, didn't place a puck after making a esspresso to plastic oven, just spred it all over the machine. What could be the problem?

  • @ugurberkay804
    @ugurberkay804 6 месяцев назад

    Hello, can you tell me which product you use for cleaning? Thank you.

  • @djklubo23
    @djklubo23 4 месяца назад

    Hi, my problem is that the hot water does not flow for the tea or the steam for the milk ;(

  • @bw2347
    @bw2347 8 месяцев назад

    Hi Milen, Another Great video I just wondering if you could help me with my Starbucks Sirena it leaks from the group head (lower boiler Assemble) even without the portafilter attached. It just seems to keep leaking and dripping from the middle of the grouphead where the brass holding screw sits. I have change the spring and mushroom seal in the group head area. Any suggestions will greatly be appreciated. Thank-you in advance Bill

  • @przemysawkasinski443
    @przemysawkasinski443 8 месяцев назад

    Hello, my DeLonghi Magnifica S ground the coffee too short. About 3 seconds, which is why the coffee is very weak. Do you think the Hall sensor will be the problem? Would you suggest checking something else first? Thanks

  • @MARTINALEKSANDROVSTANEV
    @MARTINALEKSANDROVSTANEV 10 месяцев назад

    I have a Phillips ep 1220 and the message I get is that there is air in the system but I can't the machine to expel it. Any advice?

  • @batboiko79
    @batboiko79 10 месяцев назад

    Where is your service, I have a patient Philips can you help?

  • @Sarrge1
    @Sarrge1 Месяц назад

    Привет, имам въпрос към теб. Трябва ли да попада вода във тавичката след направата на кафе? EP3221. Не е много. Клапанът 4,4 бара на който смени гумичките е нов. Предполагам, че след като механизмът на "кафеварката" се разкачи, за да се върне в позиция за ново кафе, някаква остатъчна вода от този клапан се изтича към ваната. 🤔

  • @rokasa6796
    @rokasa6796 10 месяцев назад

    You can unscrew also hot water unit from its end it has 2 seals aditionaly which you havent changed.

  • @istvanszabo6443
    @istvanszabo6443 9 месяцев назад

    Do you have the part number or name of the original and for the better springs? How to search for the parts?
    Can it cause a shortcut if this leaks the water? Ours break the phi-relay.

  • @genkokormev2064
    @genkokormev2064 Год назад +1

    Здравей Милен
    Благодаря новото наистина добро видео!
    Бих искал да попитам един въпрос.
    Защо след като са сменени всички всички О рингове на Делонги на брюгрупа и инфюзъра отработеното кафе е доста мокро / не е като сбито хапче а мокра каша ,/?
    Ще се радвам да ми отговориш !
    Честита Нова Година!
    С най-добри пожелания!
    Гено

    • @petr6067
      @petr6067 Месяц назад

      Ahoj, také mám problém, že odpadní puky jsou hodně mokré-taková kaše. Dříve to byl suchý puk. Dával jsme nové O-kroužky, promazal,ale puk je stále rozmočený :-( Nějaký nápad prosím?

  • @fatimabajwa-wj8rw
    @fatimabajwa-wj8rw 4 месяца назад

    This machine available

  • @madsnielsen7777
    @madsnielsen7777 8 месяцев назад

    Where did you buy the parts?
    I want to order them all 🙂

  • @jankozlovskij7967
    @jankozlovskij7967 5 месяцев назад

    I changed all the O-rings, according to the measurements, but it still leaks water from the bottom left side, and through the middle, maybe there is an idea?