QUICK & EASY Replace Toyota Ignition Coil Pack Connector | Toyota Lexus Scion
HTML-код
- Опубликовано: 25 сен 2024
- The connectors for the coil packs get old and brittle, the clip that holds the connector to the ignition coil will break. Here I show you how to replace the connector and remove the wiring to attached it to the Toyota factory wiring. Very simple to do once you have perfected one of them.
@ToyotaMaintenance @toyotausa
LINKS TO AMAZON:
Ignition Coil Connector: amzn.to/3EoX2gH
DIY 2.4L Toyota Spark Plug Video: • Toyota Camry 2.4L Spar...
More About BundysGarage:
goo.gl/qv3Wzc
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
/ bundysgarage
@bundysgarage
On The Web:
www.bundysgarag...
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2021
© Copyright 2021
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.
Thank you for this video! Shop wanted 700$ to replace 1 connector, 1 ignition coil and 1 spark plug
What a rip off! Glad I could save you some money!
They asked $60 for each connector replacement! U r a national hero 😊
Took me 10 mins to replace all 4
Wow for 60 dollars i can change the whole wiring harness of the engine here in dubai
Yep bro . That's call easy labor. 4 connections for 250, you can do it yourself and save 💪
They were trying to rip you off big. No way in hell it should cost that much
Thank you; thank you; thank you!!! I had purchased the replacement connectors and also purchased a cheap set of pin removal tools but was getting frustrated trying to remove the pins based on watching a few other RUclips videos. Your video was so clear with the green laser pointer-ingenious!
Excellent and to the point video... that's the way they all should be!
One note for those who are doing this... just do one wire at a time connecting to new aftermarket connector on your original harness.
That way you don't get the wires crossed. Be sure to take pictures of your original connector wire setup just to make sure you get them reinserted in the new connector in the right order. Thanks again for a great video!
I just replaced 3 of my coil connectors on my sienna using your tip.
Greatest thing ever!!!
Thank you!
Glad it helped you out!
Solved the stuttering idle on my left 2005 Camry LE..
Note: when you take off your existing clips, look inside the coil plug in for trash/plastic from the old clips the disintegrated. I had trash in almost all of them. Now my car runs great again! Thanks!
Very well illustrated. Thank you.
Thanks for sharing the video, especially, the illustration on how to push down on the plastic tab to release the wire from the connector.
Thanks. Ordered 6 from Amazon for $13. Old ones broke as soon as I touched them to change plugs. 230,000 miles and 17 years later.
Thank you, I was waiting for one month to do this job in my Camry 2010 and this morning when I watched your video was so easy, Thank you.
Nice! Just replaced all 6 of my 2016 Tacoma Sport plugs and wondered what would happen if I busted one of these. Shop quoted 650.00 to replace just the plugs! Shop quoted 650.00 for just the spark plug replacement.
Short and Sweet!!!! Thanks!
Spray the old connector contacts with electronic contact cleaner, it is much easier.
Yep, it worked. Thanks.
Excellent. Marvelous instructions. Thank you for no music amusement!
I just watched a 20 minute video on this with no result Your a legend mate 'thank you
Awesome video! Clear, concise and he even added a diagram 😭. Make more please lol
You're a life saver bro - thanks for posting this video.
Very clear directive. I have just replaced mine. Thank you loads.
Glad it helped
Thank you im going to try it out. My harness is clipped by zip ties 😂
Massive help!! Thank you!!!!
Great, Very Nice to Know.
Very clear explanation 👍👍
Thank you boss!! Great video
Thanks for information. Now, I can fix the broken connector in my wife's car
Mouse chewed through one of the 4 wires. Any chance I can only replace the one wire end to end? Also, how far does that one wire extend? I don't want to make a mess of the loom and tape job.
Saved me from splicing my 1nzfe harness thank you man
U r great and u said it stray to the point ❤❤❤
Great! Thank you. When you stick old wire into the new clip do they click and lock automatically or do you have to do anything? Thanks for posting!
thanks
Great, thanks.
Taking the liberty to do this myself. I’m not made out of damned money.
Update: I fixed it with my dad 😎
Need to disconnect the battery before doing it or not?
What if the wire is what it is broken? Had a rat get in and make a nice home right in top. Do you have how to reattach wires to a new connection?
Awesome, thanks!
ok but why not show
the replacing of the wires and connector? Is it just basically do it in reverse I imagine?
Thanks brother
Got my connectors for 12.00 a piece at Toyota dealership
Can this cause a misfire as well ?
Have a p0355 code , in Chrysler lhs , changed spark plugs, changed injector, changed coil, change camshaft sensor still giving me p0355, any suggestions?
I wish I’m dealing with a hack job. Have to cut n splice.
Did the terminals on the OEM wires fit perfectly into the aftermarket connector or did you have to make adjustments?
The connectors on the wiring harness fit perfectly into the aftermarket connectors.
Short and sweet. Stealership wanted $ 300 for replacement
@@miriamvivo4279 wow . I got Toyota connectors for $9 a piece. Just the housing, no wire stubs
@@TheDesertRat31 I picked mines up from Amazon , 4 pack of connectors like the ones in the video, for $12.99 .
Someone glued my pigtail connectors to the ignition coils....I got a cylinder 3 misfire aww damn lol
Thank you very much ✅
Saved me $100 diagnostics fee at a garage.
Nice video thanks 👍
That and VW connectors keep me busy haha
Or you could just buy the connectors
Why not just splice the wires on the connector and splice onto the other wires on the car?
Why not be a hack the rest of your life?
I can’t find the connector for a 96 Toyota Camry le 2.2 for the camshaft position sensor connector. Can anyone help please
Call 909.588.3276, ask for David in Parts. Tell him Bundy sent you, he will help you out. Make sure you have the VIN
How come not just leave them and connect them directly via their corresponding wires?
I mean, isn’t that why they leave them long enough to just strip and tape off?
You could, but this job is way too easy to go through all of that. It took me 30 minutes to complete the entire job.
Thanks