How To Repair And Replace Broken Ignition Coil Connector
HTML-код
- Опубликовано: 27 авг 2024
- Disclaimer
This video is for reference only always refer to manufacturer instructions, advice and proper service manual for actual directions specifications and safe practices when working with tools and equipment. Due to uncontrollable factors Big Will's Car Care is NOT Liable for any misuse or improper usage of Products, Information, Mechanical Equipment, Electrical Equipment, Hand Tools, Power Tools, Ramps, Jacks, Jack Stands, Cleaners, Polishes, Waxes, Car Cleaing Products, Grease, property damage, injuries, loss or damage that may result from any inappropriate and or improper use of this video and tools
Best darn macro close up I’ve ever seen. Thanks and good video!
@Liberty InParis appreciate for the feedback. Thanks for watching please Like, Share and Subscribe if you haven't already
Ty! Always knew the concept but haven’t done it!
@Asian Lovebug Thanks for watching please Like, Share and Subscribe if you haven't already
Exactly what I thought! Amazing video quality and Perfect focus.
Thanks for the upload! You're a great instructor 🔥🔥🔥!
Brother just saved me 60 Dollar . God bless you 🙂
@Abul Fazal Ahmed Thanks for watching please Like ,Share and Subscribe if you haven't already
@@BIGWILLSCARCARE only 60? :D Toyota dont have these connectors to replace them, they offer only complete new installation for around 1400 USD, imagine that! :D thank god for Ali Express.
Advising to take pictures, and doing this one pin by one is the best option for someone who's doing it as a DIY. Thank you so much for that video. I do the same with the sparkplugs, I replaced them one by one.
Thanks for watching please Like, Share and Subscribe if you haven't already
I've seen umpteen utube videos on how to do many different things. YOU, sir, r THE BEST illustrator on EXACTLY what to do, how to do it, AND with DETAILED CLOSEUP SPECIFICS.
@Whicker glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already
Excellent Video, Clear and to the point, no cheesy music, dogs or kids. TKU Sir.
It worked exactly as you described, thanks! For my car, the connector plastic was so brittle I didn't even have to bend the tabs; the wires just pulled right out. So I just pulled the pins out one at a time, and plugged them into the new connectors one at a time.
Glad it helped Thanks for watching please Like, Share and Subscribe if you haven't already
Absolute artist, best how to connector video on the tube
@Michael Johnson Thanks for watching please Like, Share and Subscribe if you haven't already
very helpful. I recently broke mine while changing the ignition coil. This video will help me to change the plug myself.
Glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already
Yes, this helped a lot. I appreciate your video. Saved me 2,000 the dealership was about to charge me.
Glad it helped. Thanks for watching please Like, Share and Subscribe if you haven't already
Watching from France...Slowly but sure..Very good explanation in a clear english..Merci Monsieur..
Thanks for watching! Please Like, Share and Subscribe if you haven't already
***Thanks for the video guy. My 2007 lexus es350 connectors just snapped at 100k miles as I was about to put in new spark plugs.
**Plastics and heat don't quite go well together after some time.
@HoodsGlobal Thanks for watching please Like, Share and Subscribe if you haven't already
Thanks, very good and useful HowTo video.
@Alain Volt Thanks for watching please Like, Share and Subscribe if you haven't already
Exactly what I needed! Thanks
@Eye on art Thanks for watching please Like, Share and Subscribe if you haven't already
Excellent video. Very thorough and informative.
@GMS Thanks for watching please Like, Share and Subscribe if you haven't already
Just what I needed.
Thank you sir! 🤘🏼
@MaNiaCaL MONSTeR thanks for watching please Like, Share and Subscribe if you haven't already
@@BIGWILLSCARCARE Absolutely... But hey can you tell me if this is necessary if deleting the coil rail and upgrading to an ignition coil pack?
@@maniacalmonster2293 you most likely can but you won't see much of a difference. Thanks for watching please Like, Share and Subscribe if you haven't already
Thanks, more video's please 🙏
Thanks for this video- gonna try it for the first time this week
Good luck! Thanks for watching please Like, Share and Subscribe if you haven't already
It went well, but I learned a major lesson about not using the absolute bottom end of a torque wrench ft lbs rating -I had my first stripped bolt (coil pack) as I never heard the wrench click till SNAP!
I extracted the bolt after a bit of dimpling/drilling the bolt surface
Glad to know all went well
Exactly what I needed to see/know. Perfect! You have a new subscriber man.
Thanks for the sub!
Awesome going to try this money saver
@Eric Dodi Thanks for watching please Like, Share and Subscribe if you haven't already
Thank you sir it really helped me out
@Chiptv Salazar Thanks for watching please Like, Share and Subscribe if you haven't already
Very descriptive
What happens if I cross the wires?
Misfire?
@JJJ YES. Thanks for watching please Like ,Share and Subscribe if you haven't already
Thank you so much
@Rich Kafulani Thanks for watching please Like, Share and Subscribe if you haven't already
Good video good job
Glad you enjoyed. Thanks for watching please Like, Share and Subscribe if you haven't already
Excellent, thank you for sharing !!
My pleasure!. Thanks for watching please Like, Share and Subscribe if you haven't already
EXCELLENT VID. Thankyou.
Glad you enjoyed it. Thanks for watching please Like, Share and Subscribe if you haven't already
Thanks for sharing this video, Question for you, if you've got a broken connector, will it trigger a check engine light? and if you plug in the obd2 reader will it show a fault code?
@Clifford Charles yes it will trigger a code and the code reader will read it. Thanks for watching please Like, Share and Subscribe if you haven't already
I currently have a PO300 misfire code. I replaced spark plugs, coils, and fuel injectors but my connectors are broken so this is my next step hope this clears the code🤞
@@truedogg323did it?
@@anthonymarquez818 No, I replaced the connectors Saturday and the code returned. I don't know what to do to diagnose this issue. Thinking about seeing if a Lexus dealer can diagnose it now.
@@truedogg323 any update? I’m having the same issue but on a Nissan versa
Many thanks for it!
@Karl Rod Thanks for watching please Like, Share and Subscribe if you haven't already
Questions how do you know witch wires goes in the right spot if u take off the hole connecter?
@Royal T.R gang you replace one wire at a time and take pictures. Thanks for watching please Like, Share and Subscribe if you haven't already
Great video! Thank you!
You are welcome! Thanks for watching please Like, Share and Subscribe if you haven't already
Do i need to put the same colors at tha same position? Thanks
Most likely because you have to put the pins in the same position. Thanks for watching please Like, Share and Subscribe if you haven't already
Nice! Little concerned about those Denso coils though. Stickers don't go on such a high heat area.
Good point! Thanks for watching please Like, Share and Subscribe if you haven't already
Thank you for making this
Gracias yo pensaba cortar y soldar
Thanks for watching please Like, Share and Subscribe if you haven't already
How much they cost and where to get them,pls? I bought used car in whicjh all connectors are broken. Will they still work with broken connectors or they can be sometimes loose?
I got them from Amazon just order a few sets and you can always return the set you didn't use. Thanks for watching please Like, Share and Subscribe if you haven't already
Great video! Where can i get the new plugs? I cant find them anywhere.
I purchase the connectors on Amazon and the plugs from Autozone or the dealership. Thanks for watching please Like, Share and Subscribe if you haven't already
Great!
Can you link me to the new connector with four 6" connected cables? If you don't have a link, could you please provide the part number? Thanks in advance!
@OneMission the best way to find the correct one is to search your vehicle's YEAR, MAKE, MODEL on Amazon, Ebay or one of the online parts store. Thanks for watching please Like, Share and Subscribe if you haven't already
Would this be a reason why my car is misfiring even tho I changed the plugs and coils
@Laura Guajardo yes that is a possibility, broken wires or loose connector. Thanks for watching please Like, Share and Subscribe if you haven't already
can this cause a missfire if the clips broke and plastic broke inside? my camry has 2 broken and its the 2 that are saying theres a missfire so im replacing the two connectors today hoping it fixes the missfire
Yes it most definitely can. Thanks for watching please Like,Share and Subscribe if you haven't
@@BIGWILLSCARCARE ive come to conclusion ive changed spark plugs ignition coils, the connectors to them i added some sea foam cuz it stutters on accelerating so im guessing it cleaned it but it clogged my injectors so gonna change those and go from there
Thanks for the vid
The least you cut splice the harness, the better!
👍 Thanks for watching please Like, Share and Subscribe if you haven't already
Thank You
DeeWok Thanks for watching please Like, Share and Subscribe if you haven't already
Great tutorial! Where did you buy the connector and what is the part number? I am looking for a connector for a 1999 Toyota Tacoma V6 3.4l. Thanks!
@Vuthy Yos you can get the online, you just have to make sure the ones you need match the ones you are looking at -i.e. if your original has 3 wires and 4 pins get the one that has 3wires and 4pins in the same spot, don't worry if wire colors are different. Thanks for watching please Like, Share and Subscribe if you haven't already
Do you have a link as to where I am order the connector?
I got them from Amazon. Thanks for watching please Like, Share and Subscribe if you haven't already
Where’d you get the new connectors?
Amazon i orderedabout three differenttypesjust to make sure its the right ones and return the ones i didnotneed. Thanks for watching please Like, Share and Subscribe if you haven't already
Hi. I have a quick, random question. Is is mandatory that I keep the red, rubber seal/gasket on the inside of the harness? I ask because I recently replaced my coil pack and I took that off and threw it away. 🤷🏾♂️
Yes, it is its to prevent water from entering the connectors but you can get away without it just watch out for any ignition issues. Thanks for watching please Like, Share and Subscribe if you haven't already
Great video! Question: where did your order the connectors from? The dealership wants to sell me the whole pigtail.
Amazon, ebay
I got them from Amazon. Thanks for watching please Like, Share and Subscribe if you haven't already
Where did you get the connectors from?
@JZ I purchased them from Amazon, just make sure they are water resistant. Thanks for watching please Like, Share and Subscribe if you haven't already
Can you change the pins too if so what are they called..
@adam sala I'm not sure but the connectors are very affordable on Amazon and are easier to change
Hey if one of the wires broke close to the orange thingy how to fix?
@Simon Isaac if you look at the 9 minute mark of my video you will see the style connector you will need in that case and how to connect it. Good luck. Thanks for watching please Like, Share and Subscribe if you haven't already
Why not link the clips you used? I have a 2006 Highlander.
Because sometimes they differ from year to year and once you ebay or Amazon it you can view and choose the one you. Thanks for watching please Like, Share and Subscribe if you haven't already
Great video thanks
@Patrick Clark Thanks for watching please Like, Share and Subscribe if you haven't already
✌thank you
@GUADALUPE LOPEZ Thanks for watching please Like, Share and Subscribe if you haven't already
Where did you buy the connector from
@shawnparker5234 I ordered them from Amazon. Thanks for watching please Like, Share and Subscribe if you haven't already
What is part number?
I can't recall but Amazon has it. Thanks for watching please Like,Share and Subscribe if you haven't already
How to get the correct connector?
@James Chupp you can get it online, just search your vehicle's year make and model. Make sure you take a picture of your original wire and connector so you can match it up. Thanks for watching please Like, Share and Subscribe if you haven't already
@@BIGWILLSCARCARE ok, Thank you!
B